Temperature, Ionic Strength and Ph Induced Electrochemical Switching of Smart Polymer Interfaces

Jianhua Zhou,Geng Wang,Jianqiang Hu,Xianbo Lu,Jinghong Li

DOI: https://doi.org/10.1039/b611405a

IF: 4.9

2006-01-01

Chemical Communications

Abstract:A reversible electrochemical switching has been displayed at smart polymer brush interfaces, which was responsive to temperature, ionic strength and pH stimuli, independently or simultaneously.

What problem does this paper attempt to address?

Selectively Tuning Ionic Thermopower in All-Solid-state Flexible Polymer Composites for Thermal Sensing

Cheng Chi,Meng An,Xin Qi,Yang Li,Ruihan Zhang,Gongze Liu,Chongjia Lin,He Huang,Hao Dang,Baris Demir,Yan Wang,Weigang Ma,Baoling Huang,Xing Zhang

DOI: https://doi.org/10.1038/s41467-021-27885-2

IF: 16.6

2022-01-01

Nature Communications

Abstract:There has been increasing interest in the emerging ionic thermoelectric materials with huge ionic thermopower. However, it’s challenging to selectively tune the thermopower of all-solid-state polymer materials because the transportation of ions in all-solid-state polymers is much more complex than those of liquid-dominated gels. Herein, this work provides all-solid-state polymer materials with a wide tunable thermopower range (+20~−6 mV K −1 ), which is different from previously reported gels. Moreover, the mechanism of p - n conversion in all-solid-state ionic thermoelectric polymer material at the atomic scale was presented based on the analysis of Eastman entropy changes by molecular dynamics simulation, which provides a general strategy for tuning ionic thermopower and is beneficial to understand the fundamental mechanism of the p - n conversion. Furthermore, a self-powered ionic thermoelectric thermal sensor fabricated by the developed p - and n -type polymers demonstrated high sensitivity and durability, extending the application of ionic thermoelectric materials.
Light-triggered Ph/thermal Multisensitive Polyelectrolyte/ito Glass Hybrid Electrode

Feng Chen,Yazhi Zhu,Wei Li,Jintao Yang,Ping Fan,Zhengdong Fei,Mingqiang Zhong,Lingqian Chang,Tairong Kuang

DOI: https://doi.org/10.1016/j.apsusc.2018.09.083

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:Surfaces with stimuli-responsive properties have shown prominent applications in bioengineering, controlled drug release and biosensors in recent years. In this work, we report a surface-initiated reversible addition-fragmentation chain transfer polymerization method to graft azobenzene-containing diblock copolymer (azoBCP) brushes onto an Indium Tin Oxide (ITO) glass surface. In this method, a sequential azo block serves as the outer layer that controls the closure or opening of the brushes, and the second block (PDMAEMA) acts as the inner layer that switches between swollen and collapsed chain states in response to different pH values and temperatures. Upon exposure to UV light, the ITO surface became more hydrophilic ( > 10 degrees change of contact angles), and its friction coefficient (0.5-0.9) increased; this suggests a loose aggregation of the azo block. Additionally, the ion conductivity of the ITO surface can be influenced by the aggregation state of the azo-BCP brushes, thus leading to the transportation of light-triggered ions under various pH values and temperatures. This work provides a deep understanding of the surface properties of a sensitive hybrid material upon various stimuli for electrode purpose, thereby paving the way for the development of bioengineering and environmental sensory applications.
Poly(N-isopropylacrylamide) Interfaces with Dissimilar Thermo-responsive Behavior for Controlling Ion Permeation and Immobilization

J. Zhou,J. Liu,G. Wang,X. Lu,Z. Wen,J. Li

DOI: https://doi.org/10.1002/adfm.200700286

IF: 19

2007-01-01

Advanced Functional Materials

Abstract:Stimuli-responsive polymer interfaces with tethered poly (N-isopropylacrylamide) (PNIPAm) chains and its cross-linked porous hydrogel as sensitive phases were fabricated by cycling an electronic potential in aqueous solution. Surface morphological analysis and electrochemical measurements revealed that, owing to their different novel structures, the PNIPAm chain-modified interface showed ON/OFF switch behavior, whereas the PNIPAm gel-modified interface exhibited a 'breathing in' process. The results suggest that the interfacial physicochemical properties, which are greatly affected by the graft conformations and topologies of PNIPAm on the substrates, could be effectively modulated by easily varying the synthesis conditions and are investigated by simple electrochemical methods. The results also demonstrate that the ON/OFF switch behavior of the PNIPAm chain-modified interface has potential applications in controlled ion/molecule permeation, and the 'breathing in' mechanism of the gel-modified interface might be applied to immobilize ions or nanoparticles. These thermo-sensitive interfaces might be used to design adaptive/responsive biocompatible surfaces in a variety of areas.
Ultrasensitive Ionic Conductors with Tunable Resistance Switching Temperature Enabled by Phase Transformation of Polymer Cocrystals.

Yichen Zhou,Chengtao Yu,Xing Zhang,Ying Zheng,Bao Wang,Yongzhong Bao,Guorong Shan,Hangxiang Wang,Pengju Pan

DOI: https://doi.org/10.1002/adma.202309568

IF: 29.4

2024-01-01

Advanced Materials

Abstract:Phase-transformable ionic conductors (PTICs) show significant prospects for functional applications due to their reversible resistance switching property. However, the representative design principle of PTICs is utilizing the melt-crystallization transition of ionic liquids, and the resistance switching temperatures of such PTICs cannot be tuned as desired. Herein, a new strategy is proposed to design PTICs with on-demand resistance switching temperatures by using the melt-crystallization transition of polymer cocrystal phase, whose melting temperature shows a linear relationship with the polymer compositions. Owing to the melt of polymer cocrystal domains and the tunable migration of ions in the resistance switching region, the obtained PTICs display ultrahigh temperature sensitivity with a superior temperature coefficient of resistance of -8.50% degrees C-1 around human body temperature, as compared to various ionic conductors previously reported. Therefore, the PTICs can detect tiny temperature variation, allowing for the intelligent applications for overheating warning and heat dissipation. It is believed that this work may inspire future researches on the development of advanced soft electrical devices. Novel phase-transformable ionic conductors (PTICs) with tunable resistance switching temperature are designed by polymer cocrystal phase. These obtained PTICs have ultrahigh temperature sensitivity in the resistance switching region and can detect tiny temperature variation, allowing for the intelligent applications for overheating warning and heat dissipation.image
Electrochemical and Electrochromic Properties of Bilayer Polymer Films Prepared by Electrochemical Polymerization Based on Star-Shaped Thiophene Derivatives

Shuanma Yan,Yujie Dong,Weijun Li,Lan Chen,Yuyu Dai,Ning Ren,Yizhao Wu,Yujian Zhang,Cheng Zhang

DOI: https://doi.org/10.1039/c9nj01730e

IF: 3.3

2019-01-01

New Journal of Chemistry

Abstract:Electrochemical and EC properties of bilayer films prepared by electropolymerization prove that charge-transport has important effects on switching speed of materials.
Dual-Responsive Polymer Brushes As an Electrochemical Logic Gate

Zhenquan Li,Hongyan Wang,Xinwang Song,Junfeng Yan,Haiyuan Hu,Bo Yu

DOI: https://doi.org/10.1016/j.jelechem.2014.01.030

IF: 4.598

2014-01-01

Journal of Electroanalytical Chemistry

Abstract:Stimuli-responsive polymer brushes modified surfaces and binary polymer surfaces can be created on an initiator terminated substrate via surface initiated atom-transfer radical polymerization (SI-ATRP), in which the growth kinetics can be modulated by Cu(II) ratio. As stimuli-responsive brushes, many environmental triggers can drive their conformation change such as pH and salt concentration. The external-stimuli modulated reversible conformational changes of polymer brushes can influence the charge transport behavior investigated by electrochemistry method, which have potential applications in in situ switching ion permeability and charge transport. The charge transport of binary polymer brush can be switched on or off by different ion flexibly which is an electrochemical logic switch.
Electrochromic Polymer Achieving Synchronous Electrofluorochromic Switching for Optoelectronic Application

Jian Liu,Mei Li,Jingchuan Wu,Yuchen Shi,Jianming Zheng,Chenye Xu

DOI: https://doi.org/10.1016/j.orgel.2017.09.022

IF: 3.868

2017-01-01

Organic Electronics

Abstract:A novel designed polymer with a goal to achieve synchronous electrochromic and electrofluorochromic switching was synthesized. Biphenyl was introduced into thiophene backbone to form twisting conformation, alleviating common aggregation-caused quenching of polythiophenes. The polymer can emit intense fluorescence in both solution and solid state while remaining excellent electrochromic properties. With applied external potential, the sprayed polymer film can turn to a transparent state (non-fluorescent state) from yellow color (fluorescent state) with comparable large transmittance change (35%) and fast response time. Furthermore, the fabricated device containing this polymer can also realize reversible electrochromic and electrofluorochromic switching simultaneously, making the designed polymer promising candidate to be applied in optoelectronic fields.
Programmable Adhesive Ionogels Dominated by Temperature-Triggered Reversible Side-Chain Crystallization

Yan Zheng,Zhikai Dong,Ming Wu,Minzhi Duan,Shuangbo Yin,Qi Jin,Shuangjun Chen,Xiaoliang Wang,Dongshan Zhou

DOI: https://doi.org/10.1016/j.cej.2024.155513

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Smart conductive adhesives are ideal for building signal transmission and dynamic adhesion interfaces in fields such as soft electronics, biomedicine, and intelligent robotics due to their on-demand switching of adhesion properties under preset conditions. However, universal strategies are still lacking to achieve convenient and adjustable triggering conditions, excellent adhesion and electrical properties. Herein, we report a programmable adhesive ionogel that can significantly switch its adhesion properties under preset temperature triggers, meeting the demands of complex scenarios. This gel is constructed using two emulsions as functional units. During the film formation process, a two-phase structure forms within the material: the ionogel phase regulates conductivity and adhesion, while the side-chain crystalline polymer phase with controllable phase transitions adjusts the trigger temperature and adhesion switching ratio. This strategy not only enables the controlled combination of these two functional components but also facilitates the independent regulation of their respective properties. As a result, the material exhibits precisely set trigger temperatures (e.g., 25/45 C-degrees), excellent conductivity (2.48 x 10(-3) S/m), adhesion (600 N/m), and switching ratios (15.58). This study provides a versatile and efficient new approach for intelligent adhesive materials' design, preparation, and multi-performance regulation.
Temperature-Responsive Multifunctional Switchable Nanoreactors of Poly (N-Isopropylacrylamide)/sio2/lanthanide-polyoxometalates/au: Controlled On/Off Catalytic and Luminescent System

Jun Wang,Xuelian Lu,Na Huang,Hongfang Zhang,Ruizhe Li,Wuke Li

DOI: https://doi.org/10.1016/j.mseb.2017.07.003

2017-01-01

Abstract:A method was developed for the preparation of temperature-responsive multifunctional nanoreactor by coating the poly (N-isopropylacrylamide) (PNIPAM) on the external surface of silicallanthanide-POMs/Au spheres. The nanoreactor showed the repeated on/off catalytic activity and switchable luminescence by temperature stimuli. For example, the nanocomplexes showed strong red luminescence in solution and excellent catalytic activity in the reduction of 4-nitrophenol at 25 degrees C. However, when the temperature was 40 degrees C, the red luminescence almost disappeared in solution and catalytic activity was sharply decreased. Moreover, in solutions of K4Fe(CN)(6) containing Na2SO4 at 25 degrees C, it demonstrated the well-defined cyclic voltammograms (CV) peaks with large peak currents, showing the "on" state; at 40 degrees C, the CV response was significantly suppressed, showing the "off" state. The smart nanoreactors have great potential for applications in many fields, such as bio-materials, controlled labeling catalysis, switches and so on. (C) 2017 Elsevier B.V. All rights reserved.
Interfacial Functionalization of Tio2 with Smart Polymers: Ph-Controlled Switching of Photocurrent Direction

Da Chen,Jinghong Li

DOI: https://doi.org/10.1021/jp100969a

2010-01-01

Abstract:TiO2/P(NIPAM-AA) nanocomposites were successfully obtained by the incorporation of TiO2 nanoparticles (P25, commercial TiO2 nanoparticles from Degussa) with pH-stimuli responsive smart polymer [poly(N-isopropylacrylamide-co-acrylic acid), P(NIPAM-AA)]. Compared with the pure TiO2 nanoparticles, the incorporation of TiO2 nanoparticles with smart polymer P(NIPAM-AA) produced a significant effect on its photocurrent activities. The photocurrent behavior of TiO2/P(NIPAM) nanocomposites photoelectrode was tunable in response to pH stimuli. It was found that the nanocomposites photoelectrode produced an anodic photocurrent at pH 3.0, whereas it generated a relatively small cathodic photocurrent at pH 10.0. The pH-dependent swelling behavior of smart polymer played an important role in the pH-induced photocurrent switching, which actually was an intrinsic feature resulting from a specific electronic structure of the surface-modified semiconductor with smart polymer. The combination of the photoelectrochemical properties of inorganic semiconductor nanoparticles with external stimuli-responsive properties of organic smart polymers provides a new opportunity for controllable photocurrent switching.
Surface Wettability Switched Cell Adhesion and Detachment on Conducting Polymer Nanoarray

Yingying Li,Yan Wei,Jingwen Liao,Yuwei Hao,Chengyun Ning,Lei Jiang,Shutao Wang

DOI: https://doi.org/10.1002/admi.201600598

IF: 5.4

2016-10-01

Advanced Materials Interfaces

Abstract:Engineering smart nanobiointerfaces which can interact with cells as an artificial niche, that can response to the change of external stimuli, remains a great challenge. Herein, it is demonstrated an electrochemical‐responsive nanobiointerface, composed of conducting polymer (polypyrrole) nanoarray, enables highly efficient cell adhesion/detachment with desirable viability along with its dynamic hydrophobic/hydrophilic switching.

materials science, multidisciplinary,chemistry
A Reversibly Electro-Controllable Polymer Brush for Electro-Switchable Friction

Hulie Zeng,Yong Zhang,Sifeng Mao,Hizuru Nakajima,Katsumi Uchiyama

DOI: https://doi.org/10.1039/c7tc01624g

IF: 6.4

2017-01-01

Journal of Materials Chemistry C

Abstract:We report electrically switchable friction, which is reversibly manipulated by an external electric field via an electro-controllable polymer branched brush.
A Smart Self‐Healing Material with Reversible Optical, Mechanical, and Electrical Transition Induced by Humidity and Temperature

Junqiang Justin Koh,Xuan Zhang,Shaohua Ling,Ximeng Liu,Lili Zhou,Zhi Qiao,Yu Jun Tan

DOI: https://doi.org/10.1002/admt.202400214

IF: 6.8

2024-05-23

Advanced Materials Technologies

Abstract:In this article, a smart self‐healing polymeric material capable of autonomously altering its mechanical, electrical, and optical properties without requiring external control or power is created. Due to the synergetic effect between the polymer, ionic liquid, and absorbed moisture, the material exhibits moisture or temperature‐induced changes in its transparency, conductivity and mechanical behavior. Smart responsive materials that can alter their function in response to environmental changes are attractive for their potential applications in intelligent devices and products. Herein, a smart material that exhibits reversible changes in multiple properties upon variations in humidity or temperature is created. The material spontaneously transits between hydrated and dehydrated states in response to fluctuations in the surrounding humidity or temperature. Consisting of a mixture of poly(propylene glycol) (PPG) with urea linkages (PPGurea) and ionic liquid [EMIM][TFSI], the transition is attributed to a series of synergetic interactions among various chemical components and groups, including ether‐cation coordination, water‐anion complex, urea‐urea bidentate hydrogen bonds, and cation–anion electrostatic interactions. In the hydrated state, with a very small amount (4–5 wt%) of spontaneously absorbed moisture content, the smart material is soft, transparent, and conductive, and possesses rapid self‐healing ability. Upon dehydration, the material transits into a phase‐separated system with PPG‐rich and IL‐rich phases, resulting in opacity, severely reduced ionic conductivity, yet significantly enhanced stiffness, strength, and toughness. The drastic change in multiple properties makes it an intelligent material well‐suited for various smart applications such as sensors, 3D printed optoelectronics and smart windows, which can automatically alter their functions to adapt to environmental changes.

materials science, multidisciplinary
Smart pH‐responsive visual hydrophobic‐hydrophilic flexible switch based on branched polymer microcapsules

Jiru Jia,Jie Chen,Wei Wang,Wei Ma,Ya Yang

DOI: https://doi.org/10.1002/app.56303

IF: 3

2024-09-21

Journal of Applied Polymer Science

Abstract:A proton‐driven smart textile with dual‐functionality, capable of switchable wettability and color modulation, based on a dual‐response strategy triggered by a single stimulus. The integration of hydrophilic‐hydrophobic switching and color‐changing functionalities into textile materials creates a synergistic effect, meeting the demands of complex application environments. This paper presents an innovative and cost‐effective approach to generating a proton‐driven smart textile with dual‐functionality, capable of switchable wettability and color modulation, by combining pH‐responsive branched polymer microcapsules (PRBMs) with conventional textile materials. The prepared PRBMs are spherical with a rough surface, exhibiting dynamic swelling (diameter of 110 nm) in acidic aqueous solutions and reversible contraction (diameter of 70 nm) in neutral or alkaline aqueous solutions. Depositing PRBMs onto polyester fabric imparts pH‐responsive wettability to the fabric surface. As a result, the fabric displays hydrophobic in neutral or alkaline aqueous solutions (pH 7), exhibiting a contact angle greater than 140°, and becomes superhydrophilic when exposed to acidic aqueous solutions (pH 3), with a contact angle of 25° within 120 s. Notably, the fabric also undergoes significant reversible color changes under different pH levels while maintaining good water vapor permeability and breathability, suitable for the pH range of human skin. This one‐step strategy achieves a flexible, visible hydrophobic‐hydrophilic switch, marking a significant advancement in the field of smart textiles and promoting their further development.

polymer science
Stimuli-responsive structure–property switchable polymer materials

Zhuang Mao Png,Chen-Gang Wang,Johnathan Joo Cheng Lee,Yee Lin Tan,Hongfei Liu,Pei Wang,Xian Jun Loh,Qiang Zhu,Jayven Yeo,Nayli Erdeanna Binte Surat'man,Maureen Beng Hoon Tan,Jianwei Xu

DOI: https://doi.org/10.1039/d3me00002h

2023-04-06

Abstract:The development of polymeric materials with switchable properties upon exposure to external stimuli such as light, heat, force, acids/bases, and chemicals has attracted much attention due to their potential applications in smart coatings, drug carriers, soft robotics, etc. Thus, a systematic understanding of the relationship between the chemical structures and stimuli-responsive properties as well as the corresponding mechanisms of switchable stimuli-responsive polymers is important to guide the sophisticated design of functional macromolecules for specific applications. In this review, we outline the representative chemical structures that enable reversible structural switching to be achieved under photo-, mechano-, CO 2 - and chemo-stimuli, with a brief discussion on thermo- and pH-activation. Polymer materials containing these chemical moieties exhibit unique behaviours on changing their mechanical, thermal or photochemical property in a switchable manner, and their applications in healing materials, rewritable surfaces, drug delivery carriers, conductive hydrogels and luminescent materials are highlighted. Based on the comprehensive summary of structural switchable moieties and applications of polymer materials, this review gives insight into how bottom-up approaches can be used to inspire the future design of switchable multi-stimuli-responsive polymer materials.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Smart pH-Modulated Two-Way Photoswitch Based on a Polymer-Modified Single Nanochannel

Yuan-Yi Wu,Li-Dong Chen,Xiu-Hong Cai,Yan Zhao,Min Chen,Xiao-Hui Pan,Yao-Qun Li

DOI: https://doi.org/10.1021/acsami.1c01975

2021-05-21

Abstract:In this article, we have demonstrated a smart pH-modulated two-way photoswitch that can reversibly switch ion transport under alternating light exposure over a wide pH range. This photoswitch was prepared by functionalizing the interior of a single conical glass nanochannel with a poly-spiropyran-linked methacrylate (P-SPMA) polymer through surface-initiated atom transfer radical polymerization. The P-SPMA polymer brushes comprise functional groups that are responsive to light and pH, which can cause configuration and charge changes to affect the properties of the nanochannel wall. The SPMA polymer-modified nanochannel not only reversibly controlled ion transport under alternating light irradiation but also efficiently and flexibly regulated the direction and extent of the ion transport based on the pH. This two-way photoswitch exhibits the considerable potential of photoresponsive polymers for the advancement of "intelligent" bionic nanochannel devices for ion screening and optical sensing in various applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01975?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01975</a>.Aperture measurement of a single glass conical nanochannel; morphological characterization of glass conical nanochannels; characterization of SPMA monomer; characterization of properties of SPMA monomers; effect of light duration on the current through the modified P-SPMA nanochannel; <i>I</i>–<i>V</i> curve at various pH conditions after UV radiation; and a blank control experiment of unmodified P-SPMA nanochannel response to alternating light (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01975/suppl_file/am1c01975_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Switching Between Polymer Architectures with Distinct Thermoresponses

Wenhui Sun,Zesheng An,Peiyi Wu

DOI: https://doi.org/10.1002/marc.201600808

IF: 5.006

2017-01-01

Macromolecular Rapid Communications

Abstract:Thermoresponsive linear polymers and their corresponding aggregates or nanogels typically show similar thermoresponsive profiles. In this study, the authors demonstrate reversible chemical switching between linear polymers and their cross-linked nanogels. The linear polymers exhibit sharp thermal transitions typical of common thermoresponsive polymers but the cross-linked nanogels exhibit linear thermal transitions over a relatively broad temperature range. The reversible switching between these two different polymer architectures with distinct thermoresponses represents a unique example of how the responsive properties of smart polymers can be significantly manipulated via polymer architecture engineering.
Temperature-responsive polymer/carbon nanotube hybrids: smart conductive nanocomposite films for modulating the bioelectrocatalysis of NADH.

Xin Zhao,Yang Liu,Jin Lu,Jianhua Zhou,Jinghong Li

DOI: https://doi.org/10.1002/chem.201103259

2012-01-01

Chemistry - A European Journal

Abstract:A temperature-sensitive polymer/carbon nanotube interface with switchable bioelectrocatalytic capability was fabricated by self-assembly of poly(N-isopropylacrylamide)-grafted multiwalled carbon nanotubes (MWNT-g-PNIPAm) onto the PNIPAm-modified substrate. Electron microscopy and electrochemical measurements revealed that these fairly thick (>6 mu m) and highly porous nanocomposite films exhibited high conductivity and electrocatalytic activity. The morphological transitions in both the tethered PNIPAm chains on a substrate and those polymers wrapping around the MWNT surface resulted in the opening, closing, or tuning of its permeability, and simultaneously an electron-transfer process took place through the channels formed in the nanostructure in response to temperature change. By combining the good electron-transfer and electrochemical catalysis capabilities, the large surface area, and good biocompatibility of MWNTs with the responsive features of PNIPAm, reversible temperature-controlled bioelectrocatalysis of 1,4-dihydro-beta-nicotinamide adenine dinucleotide with improved sensitivity has been demonstrated by cyclic voltammetry and electrochemical impedance spectroscopy measurements. The mechanism behind this approach was studied by Raman spectroscopy, in situ attenuated total reflection FTIR spectroscopy, and contact angle measurements. The results also suggested that the synergetic or cooperative interactions of PNIPAm with MWNTs gave rise not only to an increase in surface wettability, but also to the enhancement of the interfacial thermoresponsive behavior. This bioelectrocatalytic smart system has potential applications in the design of biosensors and biofuel cells with externally controlled activity. Furthermore, this concept might be proposed for biomimetics, interfacial engineering, bioelectronic devices, and so forth.
Smart Temperature-Gating and Ion Conductivity Control of Grafted Anodic Aluminum Oxide Membranes

Min-Jie Lee,Yi-Fan Chen,Lin-Ruei Lee,Yu-Liang Lin,Sheng Zheng,Ming-Hsuan Chang,Jiun-Tai Chen

DOI: https://doi.org/10.1002/chem.202301012

2023-08-01

Chemistry

Abstract:Over the past few decades, stimuli-responsive materials have been widely applied to porous surfaces. Permeability and conductivity control of ions confined in nanochannels modified with stimuli-responsive materials, however, have been less investigated. In this work, the permeability and conductivity control of ions confined in nanochannels of anodic aluminum oxide (AAO) templates modified with thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) brushes are demonstrated. By surface-initiated atom transfer radical polymerization (SI-ATRP), PNIPAM brushes are successfully grafted onto the hexagonally packed cylindrical nanopores of AAO templates. The surface hydrophilicities of the membranes can be reversibly altered because of the lower critical solution temperature (LCST) behavior of the PNIPAM polymer brushes. From electrochemical impedance spectroscopy (EIS) analysis, the temperature-gating behaviors of the AAO-g-PNIPAM membranes exhibit larger impedance changes than those of the pure AAO membranes at higher temperatures because of the aggregation of the grafted PNIPAM chains. The reversible surface properties caused by the extended and collapsed states of the polymer chains are also demonstrated by dye release tests. The smart thermo-gated and ion-controlled nanoporous membranes are suitable for future smart membrane applications.
Reversible Electrochromic/Electrofluorochromic Dual Switching in Zn(II)-Based Metallo-Supramolecular Polymer Films

Sanjoy Mondal,Dines Chandra Santra,Susmita Roy,Yemineni S L V Narayana,Takefumi Yoshida,Yoshikazu Ninomiya,Masayoshi Higuchi

DOI: https://doi.org/10.1021/acsami.3c06673

2023-09-13

Abstract:The introduction of novel materials with multifunctional chromogenic properties, such as electrochromic/electrofluorochromic (EC/EFC) properties, has recently attracted prospective interest in the development of various optoelectronic devices and smart windows. In this study, a novel Zn(II)-based metallo-supramolecular polymer (polyZn) has been developed as an ON/OFF switchable EFC application with prominent EC behavior. In this regard, the polymeric chain of polyZn was first synthesized by 1:1 complexation in a zigzag manner with Zn(II) ions at the metal center and 4,4'-[bis(2,2':6',2″-terpyridinyl)benzene]triphenylamine (LTPY-TPA) as the redox-active ditopic ligand. The polyZn exhibits excellent solubility in organic solvents and can form a very good uniform thin film on an indium tin oxide/glass substrate by spin-coating. In a neutral state, transparent polyZn exhibits a bright yellow color to the naked eye (absorption at ∼325 nm). The electroactive triphenylamine (TPA) core of LTPA-TPY, however, undergoes reversible single-electron oxidation when a positive bias of +1.6 V vs Ag/Ag+ is applied, generating radical cations (TPA ↔ TPA•+) with a significant drop in transparency (77%). A noticeable chromic shift in the hue of the film from brilliant yellow to green was observed with the appearance of a near-infrared absorption band at ∼897 nm with a tail of 1300-1600 nm. Interestingly, in addition to this EC phenomenon, the fabricated solid-state polyZn film exhibits intense, high-contrast reddish-orange photoluminescence with λem = 650 nm, which is significantly desired as a molecular probe for bioimaging. Both the TPA core and the redox-inactive Zn(II)-terpyridine core emit orange-red photoluminescence in polyZn, which is significantly quenched upon the oxidation of the film and is re-emitted at 0.0 V vs Ag/Ag+. This ON/OFF EFC transition was sustained for several cycles. This study should motivate to design and create distinctive new unique materials with combined EC/EFC behavior for the fabrication of optoelectronic devices by combining a metal-fluorescent core with a redox-active spacer.

Temperature, Ionic Strength and Ph Induced Electrochemical Switching of Smart Polymer Interfaces

Selectively Tuning Ionic Thermopower in All-Solid-state Flexible Polymer Composites for Thermal Sensing

Light-triggered Ph/thermal Multisensitive Polyelectrolyte/ito Glass Hybrid Electrode

Poly(N-isopropylacrylamide) Interfaces with Dissimilar Thermo-responsive Behavior for Controlling Ion Permeation and Immobilization

Ultrasensitive Ionic Conductors with Tunable Resistance Switching Temperature Enabled by Phase Transformation of Polymer Cocrystals.

Electrochemical and Electrochromic Properties of Bilayer Polymer Films Prepared by Electrochemical Polymerization Based on Star-Shaped Thiophene Derivatives

Dual-Responsive Polymer Brushes As an Electrochemical Logic Gate

Electrochromic Polymer Achieving Synchronous Electrofluorochromic Switching for Optoelectronic Application

Programmable Adhesive Ionogels Dominated by Temperature-Triggered Reversible Side-Chain Crystallization

Temperature-Responsive Multifunctional Switchable Nanoreactors of Poly (N-Isopropylacrylamide)/sio2/lanthanide-polyoxometalates/au: Controlled On/Off Catalytic and Luminescent System

Interfacial Functionalization of Tio2 with Smart Polymers: Ph-Controlled Switching of Photocurrent Direction

Surface Wettability Switched Cell Adhesion and Detachment on Conducting Polymer Nanoarray

A Reversibly Electro-Controllable Polymer Brush for Electro-Switchable Friction

A Smart Self‐Healing Material with Reversible Optical, Mechanical, and Electrical Transition Induced by Humidity and Temperature

Smart pH‐responsive visual hydrophobic‐hydrophilic flexible switch based on branched polymer microcapsules

Stimuli-responsive structure–property switchable polymer materials

Smart pH-Modulated Two-Way Photoswitch Based on a Polymer-Modified Single Nanochannel

Switching Between Polymer Architectures with Distinct Thermoresponses

Temperature-responsive polymer/carbon nanotube hybrids: smart conductive nanocomposite films for modulating the bioelectrocatalysis of NADH.

Smart Temperature-Gating and Ion Conductivity Control of Grafted Anodic Aluminum Oxide Membranes

Reversible Electrochromic/Electrofluorochromic Dual Switching in Zn(II)-Based Metallo-Supramolecular Polymer Films