Abstract:Eco-gelled coal gangue materials (EGCGMs) are usually produced using coal gangue, slag, and fly ash in a highly alkaline environment. Herein, to improve the mechanical properties of such materials, polypropylene fibers were uniformly mixed with them. An unconfined compressive strength test and a three-point bending test of the fiber-reinforced EGCGMs under different conditions were conducted. Based on the performance degradation control technology of the fiber structure, the interface mechanism of the composite materials was analyzed from the micro level using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). In the mechanical test, the 28 d UCS and flexural properties of the fiber-reinforced EGCGMs were analyzed using the Box–Behnken design response surface design method and orthogonal design method, respectively. The order of significance was as follows: sodium hydroxide, fiber length, and fiber content. Within the scope of the experimental study, when the NaOH content is 3, the fiber content is 5 ‰, and the fiber length is 9 mm, the mechanical properties are the best. Based on the microscopic equipment, it was discovered that the amorphous ecological glue condensation product formed by the reaction of slag and fly ash in the alkaline environment was filled between the coal gangue particles and the fibers, and several polymerization products accumulated to form a honeycomb network topology. The distribution of fibers in the EGCGM matrix could be primarily divided into single embedded and network occurrences. The fiber inhibits the crack initiation and development of the matrix through the crack resistance effect, and improves the brittleness characteristics through the bridging effect during the failure process, which promotes the ductility of the ecological cementitious coal gangue matrix.The results presented herein can provide a theoretical basis for improving the mechanical properties of alkali-activated geopolymers.

STUDY OF PREPARING POROUS CERAMIC SOUND-ABSORBING MATERIAL MADE FROM GANGUE

Design,Preparation and Properties Research of Light-weight and Porous Cement-based Sound Absorbing Material

Preparation of Cement Based on Composite Porous Sound-absorbing Material and its Properties

Study on Sound Propagation Performance of Mechanized Coal Gangue-Fine Sand Filling Body

Enhancement of Coal Gangue Performance by Surface Micro-Crystalline Glaze Derived from Mineral Powder

Porous ceramics derived from steel slag/coal gangue mixtures using cigarette butts as the pore‐forming agent

Study on comprehensive properties of mullite porous ceramics prepared from gangue based on sintering temperature

Development of a Sound Absorbing Gypsum-Based Porous Composite Material

Facile synthesis of Co-loaded ceramic composite absorbents via gangue recycling

Enhanced Sound Absorption Performance of Porous Ceramics with Closed-Pore Structure

ANALYSIS OF INFLUENCE FACTOR OF CERAMIC WATE'S SOUND ABSORBEND MATERIAL

Study on Mechanical Properties and Micro Characterization of Fibre Reinforced Ecological Cementitious Coal Gangue Materials

Fabrication and application of porous materials made from coal gangue: a review

High sound absorption characteristics of foamed alumina ceramics fabricated by gelcasting-foaming process

Research on Control Factors and Performance of YAG Porous Ceramics

The influence of NaOH concentration on the strength and microstructure of ceramic binders prepared from coal gangue through geopolymerization

Enhanced sound absorption properties of porous ceramics modified by graphene oxide films

Preparation and Properties of High Sound-Absorbing Porous Ceramics Reinforced by In Situ Mullite Whisker from Construction Waste

Research on absorption property of glass hollow sphere porous materials

Controllable preparation and properties of gel-casting porous mullite ceramics via lignin fiber assisted pore formation method

Sustainable Use of Coal Gangue and Other Wastes in Lightweight Material: Physical-mechanical, Environmental Security and Synergistic Mechanisms