Abstract:The radio frequency argon plasma was applied to improve surface properties of the PBO fiber. The fiber tensile strength was measured, and the surface chemical components, topography and wettability were analyzed by X-ray photoelectron spectroscopy (XPS), atomic force microscopy and dynamic contact angle analysis (DCAA), respectively. Results suggested that over 90% of the fiber tensile strength was reserved after treatment at lower power levels. The surface oxygen atoms increased with a very small extent and the O/C ratio increased from 0.25 to 0.29. The plasma sputtering caused scission of chemical bonds and damage to the surface crystallizing layers, and thus created many active functional groups and roughened surface. However, at high power conditions the more effective ablation and sputtering effects dramatically reduced the tensile strength, surface oxygen contents and roughness. The fiber surface wettability was markedly increased as a result of the functionalization and roughening effects, but the calculated polar and dispersive free energy did not agree well with the measured surface chemical components due to the different effective depths of the surface layers analyzed by DCAA and XPS. The increased roughness was considered to be another reason. The treated fiber exhibited better adhesion with bismaleimide resin, but the maximum interlaminar shear strength of the PBO/bismaleimide composite could not be reproduced by increasing the treatment time at lower power level conditions.

Surface modification of PBO fibers by polphosphoric acid/acetic acid

Improvement of Interfacial Adhesion Between Pbo Fibers and Cyanate Ester Matrix

Plasma Modification on PBO Fiber Surface and Interfacial Properties of PBO Fiber

Surface Modification of PBO Fibers by Argon Plasma and Argon Plasma Combined with Coupling Agents

Progress of PBO fiber Modification Technology

Surface modification of PBO fiber through oxygen plasma induced vapor phase grafting of acrylic acid

Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism

Surface Modification of PBO Fibers by Methanesulfonic Acid

Chemical Modification of the Surface of PBO Fibers

Surface Modification Of Pbo Fiber By Fibrillation Combined With Oxygen Plasma Treatment

EFFECT OF SURFACE MODIFICATION OF PBO FIBER ON PROPERTY OF EP/PBO FIBER COMPOSITE

Improvement of surface property of HMPBO fibers by polyphosphoric acid/absolute alcohol under ultrasonic vibration

Improvement of Surface Wettability and Hydrophilization of Poly-paraphenylene Benzobisoxazole Fiber with Fibrillation Combined Oxygen Plasma Treatment

Tensile Strength of Surface Treated PBO Fiber

Improvement of the interfacial shear strength of poly(p‐phenylene benzobisoxazole) fiber/epoxy resin composite via a novel surface coating agent

Surface modification of high performance PBO fibers using radio frequency argon plasma

Interface Properties of Composites from PBO Fibers Modified by Polyurethane Sizing Agent

Improvement of the Interfacial Adhesion Between PBO Fiber-Epoxy Resin

Plasma Grafting Modification on PBO Fiber Surface

Effect of Fiber Surface Treatment on Interface Performance of PBO/Epoxy Resins Composite

Improvement of Shear Strength of Composite Materials Via Chemical Treatment of PBO Fiber