Experiments on flexural behavior of steel twisted box-section members of the National Stadium
QIAN Jiaru,ZHAO Zuozhou,PENG Mingying,FAN Zhong,PENG Yi
DOI: https://doi.org/10.3321/j.issn:1000-6869.2007.02.015
2007-01-01
Abstract:In order to study the flexural behavior of steel twisted box-section members of the National Stadium for the 2008 Beijing Olympic Games,4 two-fifth scale,thin-walled,steel-plated box girders curved in plan and distorted along its axial line were loaded under reversed flexural bending to failure.The variables considered were the width to thickness ratio of surface plate and the space between stiffeners placed inside of box-section members.It was found that all specimens failed in local buckling of the surface plates under compression.For specimens with surface plate width to thickness ratio of 120 when the ratio of the space between stiffeners to the thickness of surface plate reduced from 120 to 80,the elastic stiffness had little increase,the flexural strength and the deformation capacity were not improved.For specimens with surface plate width to thickness ratio of 80,the ratio of the space between stiffeners to the plate thickness reduced from 80 to 54,or for specimens with the ratio of the space between stiffeners to the plate thickness of 80,the surface plate width to thickness ratio reduced from 120 to 80,the elastic stiffness as well as flexural strength increased,and the flexural behavior was improved.