Abstract:The corrosion of reinforcements induced by chloride has resulted to be one of the most frequent causes of their premature damage. Most corrosion sensors were designed to monitor corrosion state in concrete, such as Anode-Ladder-System and Corrowatch System, which are widely used to monitor chloride ingress in marine concrete. However, the monitoring principle of these corrosion sensors is based on the macro-cell test method, so erroneous information may be obtained, especially from concrete under drying or saturated conditions due to concrete resistance taking control in macro-cell corrosion. In this paper, a fast weak polarization method to test corrosion state of reinforcements based on electrochemical polarization dynamics was proposed. Furthermore, a new corrosion sensor for monitoring the corrosion state of concrete cover was developed based on the proposed test method. The sensor was tested in cement mortar, with dry-wet cycle tests to accelerate the chloride ingress rate. The results show that the corrosion sensor can effectively monitor chloride penetration into concrete with little influence of the relative humidity in the concrete. With a reasonable corrosion sensor electrode arrangement, it seems the Ohm-drop effect measured by EIS can be ignored, which makes the tested electrochemical parameters more accurate.

Development and application of concrete chlorine ion penetration resistance measuring instrument according to the ASTM C1202 specification

Development and application of multipurpose chlorine ion penetration resistance of concrete measuring instrument

Experimental Study On Permeability And Chloride Resistance Properties Of Concrete In Yu-Cheng Bridge

Comparison of Chloride Penetration into Surface-Treated Concrete in Artificial and Natural Environments

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

Study On Relationship Between Chloride Diffusion In Concrete And Time

Chloride Penetration in Surface-Treated Concrete in Natural and Accelerated Environments

Rapid assessment of concrete permeability using alternating current(AC) impedance spectroscopy technology

Experimental study on electrical characteristics of ions in concrete at early age under electric field

Comparative Study On Testing Methods Of Chloride Ions Diffusion Coefficient In Concrete

A New Test Method to Simulate Chloride Penetration into Concrete in Tidal Zone

Study of Diffusivity of Chloride Ion on Surface Layer of Concrete Based on AC Impedance Technology

Accelerating Tests For The Performance Deterioration Of Concrete Exposed To Chloride Media

Experimental Research on Performance of Anti-corrosion Coating Against Chloride Ion Ingress into Concrete

New Fast Test Method to Determine Chloride Depassivation Threshold of Rebar in Concrete

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Correlating the Chloride Diffusion Coefficient and Pore Structure of Cement-Based Materials Using Modified Noncontact Electrical Resistivity Measurement

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Numerical Simulation of Chloride Penetration in Concrete in Rapid Chloride Migration Tests