Abstract:In saline soil areas, the concrete piers of concrete bridges experience long-term corrosion, mainly caused by chloride salts due to alternating temperature changes. Waterborne concrete coatings are prone to failure in this aggressive salt environment. Implementing coating protection measures can improve the durability of concrete and enhance the service life of bridges. However, the effectiveness and longevity of coatings need further research. In this paper, three types of waterborne concrete anti-corrosion coatings were applied to analyze the macro and micro surface morphology under wet–dry cycles and long-term immersion conditions. Various indicators such as glossiness, color difference, and adhesion of the coatings were tested during different cyclic periods. The chloride ion distribution characteristics of the buried concrete coatings in saline soil, the macro morphology analysis of chloride ion distribution regions, and the micro morphology changes of the coatings under different corrosion times were also investigated. The results showed that waterborne epoxy coatings (ES), waterborne fluorocarbon coatings (FS), and waterborne acrylic coatings (AS) all gradually failed under long-term salt exposure, with increasing coating porosity, loss of internal fillers, and delamination. The chloride ion content inside the concrete decreased with increasing depth at the same corrosion time, while the chloride ion content at the same depth increased with time. The chloride ion distribution boundary in the cross-section of concrete with coating protection was not significant, while the chloride ion distribution boundary in the cross-section of untreated concrete gradually contracted towards the concrete core with increasing corrosion time. During the corrosion process in saline soil, the coatings underwent three stages: adherence of small saline soil particles, continuous increase in adhered material area, and multiple layers of uneven coverage by saline soil. The failure process of the coatings still required erosive ions to infiltrate the surface through micropores. The predicted lifespans of FS, ES, and AS coatings, obtained through weighted methods, were 2.45 years, 2.48 years, and 2.74 years, respectively, which were close to the actual lifespans observed in salt environments. The developed formulas effectively reflect the corrosion patterns of different resin-based coatings under salt exposure, providing a basis for accurately assessing the corrosion behavior and protective effectiveness of concrete under actual environmental factors.

Experimental Research on Performance of Anti-corrosion Coating Against Chloride Ion Ingress into Concrete

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

A Comparison Study of the Performance of Three Electro-Migrating Corrosion Inhibitors in Improving the Concrete Durability and Rehabilitating Decayed Reinforced Concrete

SIMULATED RESEARCH ON CORROSION OF REINFORCEMENT IN CONCRETE UNDER CHLORIDE ENVIRONMENT

Evaluation of the Performance of Surface Treatments on Concrete Durability

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation

Attenuation Law of Performance of Concrete Anti-Corrosion Coating under Long-Term Salt Corrosion

MECHANISM AND MATHEMATIC MODELING OF CHLORIDE PERMEATION IN CONCRETE UNDER UNSATURATED STATE

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Experimental study on electrical characteristics of ions in concrete at early age under electric field

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Chloride Ion Distribution in Concrete of Dry-Wet Cycling Region along Elevated Altitude

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Shear Performance of Reinforced Concrete Beams with Corroded Stirrups in Chloride Environment

Exploration into Anticorrosive Property of Antirust Compound-Admixture

Mechanical Performance of Corroded Steel Bars in Concrete

Corrosion Prediction Models for Steel Bars in Chloride-Contaminated Concrete: a Review

Research on Chloride Appropriate Dosage for Incorporated Accelerated Corrosion