Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

Enhanced Ionic Conductivities in Composite Polymer Electrolytes by Using Succinonitrile As a Plasticizer

All-solid-state polymer electrolyte with plastic crystal materials for rechargeable lithium-ion battery

Modulating the Li‐Ion Transport Pathway of Succinonitrile‐Based Plastic Crystalline Electrolytes for Solid‐State Lithium Metal Batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Succinonitrile Plastic Crystal Polymer Electrolyte for Lithium Metal Battery

Insights into quasi solid‐state polymer electrolyte: The influence of succinonitrile on polyvinylene carbonate electrolyte in view of electrochemical applications

Succinonitrile-Polymer Composite Electrolytes for Li-Ion Solid-State Batteries-The Influence of Polymer Additives on Thermomechanical and Electrochemical Properties

Effects of Components in Solvent-Enhanced PVDF-HFP-Based Polymer Electrolyte on Its Electrochemical Performance

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

A solid-like succinonitrile-based polymer electrolyte with superior mechanical strength for high performance lithium metal batteries

Inducing an Amorphous Phase in Polymer Plastic Crystal Electrolyte for Effective Ion Transportation in Lithium Metal Batteries

Decoupling of Ion-Transport From Polymer Segmental Relaxation and Higher Ionic-Conductivity in Poly(ethylene oxide)/Succinonitrile Composite Based Electrolytes Having Low Lithium Salt Doping

Solid-State NMR Revealing the Impact of Polymer Additives on Li-Ion Motions in Plastic-Crystalline Succinonitrile Electrolytes

Composite polymer electrolyte for Li-ion battery

Polymer Composite Electrolytes Containing Ionically Active Mesoporous SiO2 Particles

Suppression of Crystallization in A Plastic Crystal Electrolyte (sn/liclo4) by A Polymeric Additive (polyethylene Oxide) for Battery Applications

Weakening Ionic Coordination for High Ionic Conductivity Composite Solid Electrolytes

Enhancing the ionic conductivity in a composite polymer electrolyte with ceramic nanoparticles anchored to charged polymer brushes

Conductivity enhancement in plastic-crystalline solid-state electrolytes

Effect of Succinonitrile on Ion Transport in PEO-based Lithium Ion Battery Electrolytes

In-situ Fabricated Succinonitrile-Based Composite Electrolyte for High-Performance and Safe Solid-State Lithium Batteries