Abstract:This article unveils an interaction between polymer and solvent in a gel electrolyte for lithium‐ion battery, that the polymer's polar group can participate in Li+ solvation structure and thereby inhibit the notorious solvent co‐intercalation in graphite anode and excessive side reactions in Si and Li anodes. The quasi‐solid gel electrolytes are beneficial for large current density operation, long‐term cycling, or safety enhancement. Lithium‐ion batteries using quasi‐solid gel electrolytes (QSEs) have gained increasing interest due to their enhanced safety features. However, their commercial viability is hindered by low ionic conductivity and poor solid–solid contact interfaces. In this study, a QSE synthesized by in situ polymerizing methyl methacrylate (MMA) in 1,2–dimethoxyethane (DME)‐based electrolyte is introduced, which exhibits remarkable performance in high‐loading graphite||LiNi0.8Co0.1Mn0.1O2 (NCM811) pouch cells. Owing to the unique solvent‐lacking solvation structure, the graphite exfoliation caused by the well‐known solvent co‐intercalation is prohibited, and this unprecedented phenomenon is found to be universal for other graphite‐unfriendly solvents. The high ionic conductivity and great interfacial contact provided by DME enable the quasi‐solid graphite||NCM811 pouch cell to demonstrate superior C‐rate capability even at a high cathode mass loading (17.5 mg cm‐2), surpassing liquid carbonate electrolyte cells. Meanwhile, the optimized QSE based on carbonates exhibits excellent cycle life (92.4% capacity retention after 1700 cycles at 0.5C/0.5C) and reliable safety under harsh conditions. It also outperforms liquid electrolytes in other high‐energy‐density batteries with larger volume change. These findings elucidate the polymer's pivotal role in QSEs, offering new insights for advancing quasi‐solid‐state battery commercialization.

Insights into quasi solid‐state polymer electrolyte: The influence of succinonitrile on polyvinylene carbonate electrolyte in view of electrochemical applications

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

All-solid-state polymer electrolyte with plastic crystal materials for rechargeable lithium-ion battery

Modulating the Li‐Ion Transport Pathway of Succinonitrile‐Based Plastic Crystalline Electrolytes for Solid‐State Lithium Metal Batteries

Succinonitrile Plastic Crystal Polymer Electrolyte for Lithium Metal Battery

Quasi-solid polymer electrolytes with fast interfacial transport for lithium metal batteries

Novel Quasi Solid-State Succinonitrile-based Electrolyte with Low-flammability for Lithium-ion Battery

Inducing an Amorphous Phase in Polymer Plastic Crystal Electrolyte for Effective Ion Transportation in Lithium Metal Batteries

Polymer‐Ion Interaction Prompted Quasi‐Solid Electrolyte for Room‐Temperature High‐Performance Lithium‐Ion Batteries

Enhanced Ionic Conductivities in Composite Polymer Electrolytes by Using Succinonitrile As a Plasticizer

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Regulating the Solvation Structure in Polymer Electrolytes for High‐Voltage Lithium Metal Batteries

A Chitosan/Poly(ethylene Oxide)‐based Hybrid Polymer Composite Electrolyte Suitable for Solid‐State Lithium Metal Batteries

A solid-like succinonitrile-based polymer electrolyte with superior mechanical strength for high performance lithium metal batteries

An Ion‐Dipole‐Reinforced Polyether Electrolyte with Ion‐Solvation Cages Enabling High–Voltage‐Tolerant and Ion‐Conductive Solid‐State Lithium Metal Batteries (Adv. Funct. Mater. 5/2022)

Ternary Stabilization Strategies for Succinonitrile-Based in Situ Polymerized Electrolyte Enabling High-Performance Solid Lithium Metal Batteries

Nonflammable Quasi-Solid-state Electrolyte for Stable Lithium-Metal Batteries

In Situ Polymerized Quasi-Solid Electrolytes Compounded with Ionic Liquid Empowering Long-Life Cycling of 4.45 V Lithium-Metal Battery

High-performance quaternary polymer solid-state electrolyte via one-step casting method

In-situ Fabricated Succinonitrile-Based Composite Electrolyte for High-Performance and Safe Solid-State Lithium Batteries

Regulating Micro‐phase Structure in Plastic Crystal Gel Polymer Electrolyte for Quasi‐Solid‐State Lithium Metal Batteries