Abstract:Composite film heater is becoming the focus of research in the deicing field, owing to its advantages of high electro-thermal efficiency and lightweight. In this work, a new composite film heater with ultralow conductive filler was designed and prepared by mixing insoluble ethyl vinyl acetate (EVA) and soluble polyvinylidene fluoride (PVDF) in dimethylformamide (DMF). It is common sense that many insoluble EVA fillers degrade mechanical properties due to the macro-interface defect. The molecular dynamic simulation indicated that interfacial blending regions were formed more easily between molten EVA and soluble PVDF on account of the similar solubility parameter and stronger adsorption energy between Vinyl acetate segmer and PVDF segmer. The semi-compatible system was favorable to eliminate the macro-interface defect between EVA and PVDF partially. The film heater showed better tensile strength, flexibility, and bending durability after heat treatment of 80 °C. Moreover, the film heater had an outstanding heating effect, fast electro-thermal response time, low-energy consumption, and excellent thermal cycling stability. It achieved the steady-state temperature of 117.4 °C and the heating rate of 1.348 °C/s when the ratio of PVDF to EVA was 1:1 and the amount of CNT was only 10% at 28 V. The optimal ratio of CNT and EVA could construct a double reticular structure, consists macroscopic and microscopic conductive network at the same time, thereby reducing the content of conductive filler significantly. Furthermore, the deicing experiment manifested that the icicle fell after 29 s at 28 V, much shorter than without loading current. The integrated CNT@EVA/PVDF composite film heater contributes to a better understanding of the low percolation effect and the distribution mechanism between molten EVA and soluble PVDF, which could conduce to the development of novel electro-thermal deicing film in future.

Preparation of large-area double-walled carbon nanotube films and application as film heater

Carbon nanotube-based flexible electrothermal film heaters with a high heating rate

Carbon Nanotube Films with Fewer Impurities and Higher Conductivity from Aqueously Mono-Dispersed Solution via Two-Step Filtration for Electric Heating

Design and Test of Carbon Nanotube Biwick Structure for High-Heat-Flux Phase Change Heat Transfer

Dry-transferred Single-Walled Carbon Nanotube Thin Films for Flexible and Transparent Heaters

Wafer-scale Monodomain Films of Spontaneously Aligned Single-Walled Carbon Nanotubes

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Large-Scale Preparation of Silver Nanowire-Based Flexible Transparent Film Heaters by Slot-Die Coating

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Synthesis of double-walled carbon nanotube films and their field emission properties

Modeling of thermocapillary flow to purify single-walled carbon nanotubes

Multi-scale GO/CNT/AlN nanocomposites for high-performance flexible electrothermal film heaters

Stretchable and Energy-Efficient Heating Carbon Nanotube Fiber by Designing a Hierarchically Helical Structure

Single-wall carbon nanotube fiber non-woven fabrics with a high electrothermal heating response

Highly stable phosphotungstic acid/Au dual doped carbon nanotube transparent conductive films for transparent flexible heaters

Crack-free and Scalable Transfer of Carbon Nanotube Arrays into Flexible and Highly Thermal Conductive Composite Film.

Multifunctional Super-Aligned Carbon Nanotube/polyimide Composite Film Heaters and Actuators

Densification Induced Decoupling of Electrical and Thermal Properties in Free‐Standing MWCNT Films for Ultrahigh p‐ and n‐Type Power Factors and Enhanced ZT

Regulatable Thermal Conductivity and Excellent Mass Transport of Water-Filled Carbon Nanotube As Capillary Wicks

Molecular design and preparation of an integrated CNT@EVA/PVDF composite film heater for effective deicing applications

Development of Carbon Nanotubes–Graphene–Polydimethylsiloxane Composite Film with Excellent Electrothermal Performance