Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Preparation and Characterization of Nano-Sized LiFePO4 by Low Heating Solid-State Coordination Method and Microwave Heating

Preparation and characterization of LiFePO 4 from NH 4 FePO 4 ·H 2 O under different microwave heating conditions

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Nano-LiFePO[sub 4]∕MWCNT Cathode Materials Prepared by Room-Temperature Solid-State Reaction and Microwave Heating

Preparation of LiFePO4 Nanoparticles in Virtue of Triblock Copolymer P123 and Their Application in Li-ion Battery

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

Preparation and Characterization of LiFePO4 Made from NH4FePO4·H2O

Characteristics of LiFePO4 synthesized from NH4FePO4-H2O via microwave processing

Microwave synthesis of molybdenum doped LiFePO4/C and its electrochemical studies

Preparation and Characterization of Nano LiFePO<sub>4</sub>/C for Lithium-Ion Batteries

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

Study on the Preparation of Lifepo4 by Hydrothermal Method

Preparation and characterization of LiFePO4 made from NH4FePO4 center dot H2O

Preparation and Characterization of LiFePO[sub 4] from a Novel Precursor of NH[sub 4]fepo[sub 4]⋅h[sub 2]O

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

The preparation and characterization of LiFe0.98Mn0.02PO4/C by spraydrying and low temperature reduction route

Preparation And Characterization Of Lifepo4 From A Novel Precursor Of Nh4fepo4 Center Dot H2o

High Density LiFePO4/C Synthesized by Controlled Crystallization and Microwave Carbon Thermal Reduction

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis and Characterization of LiFePO4 by a New Synthetic Route

Preparation and Characteristic of High-Density Spherical LiFePO4