Abstract:We conducted a study to investigate the impact of the laser direct metal deposition (LMD) process on the microstructure, mechanical properties, temperature fields, and stress fields of 24CrNiMo steel in order to determine the optimal process parameters. The optimal parameters were determined to be a laser power of 1400 W, scanning speed of 7 mm/s, and powder feed rate of 8 g/min. When these optimal parameters were used, the formed specimens exhibited a high densely of up to 97.5 %. The microstructure of the specimens formed different parameters primarily consisted of bainite, martensite and ferrite. The specimens formed under various process conditions demonstrated good toughness, with a maximum tensile strength of 1131±20 MPa and an elongation of 16±1.8 %. Additionally, there was little difference in wear resistance and wear morphology among the specimens formed under different processes. The predominant wear mechanisms include abrasive wear, adhesive wearand oxidative wear. Increasing laser power and decreasing scanning speed resulted in a gradual increase in the temperature gradient gradually, leading to higher residual stresses in the formed specimens. Longitudinal stresses concentrated on both sides of the deposited layer, while the transverse stresses concentrated on one side of the deposited layer. The simulation results of the temperature field and stress field were consistent with the experimental results, with errors within the range of 10 %–20 %. This study demonstrated that the simulated models of temperature and stress fields effectively captured the fundamental phenomena in the LMD process, providing valuable tools for predicting and optimizing temperature distribution and stress in the LMD process. These findings contribute to the understanding and enhancement of the LMD process for 24CrNiMo steel, making it applicable for various applications requiring superior microstructure and mechanical properties.

Investigation into the Direct Laser Forming Process of Steam Turbine Blade

Fabricating the Steam Turbine Blade by Direct Laser Forming

Dependence of Microstructural Evolution on the Geometric Structure for Serviced DZ125 Turbine Blades

Investigation on the Microstructure of Direct Laser Additive Manufactured Ti6Al4V Alloy

Influence of Laser Waveform Features on Accuracy of Direct Metal Forming

Laser shock micro-sheet bulk metal forming: numerical simulation and experimental validation

Laser Direct Forming of Metal Components: Technical Characterizations

Investigation on Multi-Track Multi-Layer Epitaxial Growth of Columnar Crystal in Direct Laser Forming

Experimental Study on the Laser Direct Fabrication of Stainless Steel Components

Experimental Study of Laser Cladding Methods on Water Erosion Resistance to Low Pressure Blades Materials of Steam Turbine

Numerical simulation of the three-dimensional temperature field in laser cladding forming process

Research On Technics Of Laser Direct Metal Deposition Forming Technology

Influence of Laser Different Waveform on Accuracy of Metal Direct Forming

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

Effect of laser direct metal deposition process on the microstructure and mechanical properties and temperature and stress fields of 24CrNiMo

Numerical Investigation on Laser-Produced Microstructure of Metal under Non-Melting Condition

Multi-scale Modelling of Solidification and Microstructure Evolution in Laser-Deposition of T15 High Speed Steel

Direct Investigation on High Temperature Tensile and Creep Behavior at Different Regions of Directional Solidified Cast Turbine Blades

Investigating the Effects of Powder Feeding Rate on Microstructure Transformation in Linear Laser Beam Additive Manufactured Thick-Walled Structures

Feasibility Study of Microscale Laser Shock Processing Without Absorbing Coating to Improve High-Cycle Fatigue Performance of DZ17G Directionally Solidified Superalloy

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition