Abstract:In order to allow a good separation of isotopes in a High Resolution Mass Spectrometer (HRMS), the transverse emittance and the energy spread of the beam should have very low values, for this reason a Beam Cooler (BC) is planned to be located between the ISOL target, i.e. the beam source, and the HRMS in the new project Selective Production of Exotic Species (SPES). In the SPES project the spectrometer resolution must be higher than dm/m=5E-5 and thus the features of the beam at the entrance of the HRMS should be at least emittance (95%, normalized) < 8.3E-3 pi mm mrad and sigma_E < 1.5eV. A new BC has been designed and realized by the Laboratoire de Physique Corpuscolaire (LPC) at Caen, France, for the SPES facility at Laboratori Nazionali di Legnaro (LNL), near Padova, Italy. BCs cool down the beam thanks to a dissipative process in which the thermal energy passes from the beam ions to another medium whose constituent is typically much lighter, Helium gas in our case. This process takes place inside a confinement system that on the one hand to limit the spread of the cooling medium, and on the other to allow the beam to continue along the required trajectory, in the presented device it is a row of radio frequency quadrupoles in an almost closed chamber. This document presents the main features of the new BC together with the results of a preliminary study where the beam dynamic has been simulated. The analysis embeds also the investigation of the gas distribution inside and outside the BC. The beam dynamic simulations are based on the Simion code while the estimation of the gas distribution is computed with MolFlow+. Simulations show that accurately setting the BC leads to a large improvement of the emittance while the energy spread still needs to be improved. Limiting the gas pressure in the acceleration zone seems to allow the required final boost.

Isobar Separation at FRS-ESR – a Development Towards Pure Isomeric Stored Beams

Current and Future Electron Spectroscopy Experiments in Relativistic Storage Rings

Storage, Accumulation and Deceleration of Secondary Beams for Nuclear Astrophysics

Production and Separation of Positron Emitters for Hadron Therapy at FRS-Cave M.

Electron-ion merged-beam experiments at heavy-ion storage rings

Nuclear Structure Studies of Short-Lived Neutron-Rich Nuclei with the Novel Large-Scale Isochronous Mass Spectrometry at the FRS-ESR Facility

SPARC Collaboration: New Strategy for Storage Ring Physics at FAIR

Storage ring at HIE-ISOLDE

A New Beamline for Laser Spin-Polarization at ISOLDE

A high-resolution asymmetric von Hamos spectrometer for low-energy X-ray spectroscopy at the CRYRING@ESR electron cooler

The WASA-FRS Project at GSI and Its Perspective

A facility for production and laser cooling of cesium isotopes and isomers

Letter of Intent to the ISOLDE and Neutron Time-of-Flight Committee Exploring the feasibility of production and laser spectroscopy experiments of exotic silicon isotopes January 13 , 2017

Increasing the rate capability for the cryogenic stopping cell of the FRS Ion Catcher

Astrophysics with heavy-ion beams

Impact Parameter Sensitive Study of Inner-Shell Atomic Processes in the Experimental Storage Ring

$Bρ$-defined Isochronous Mass Spectrometry and Mass Measurements of $^{58}$Ni Fragments

A Setup to Study Atomic State Population Dynamics and Optical Polarization at CRYRING@ESR

Realization and simulations of the new SPES Beam Cooler

Studies of Heavy Ion-Induced High-Energy Density States in Matter at the GSI Darmstadt SIS-18 and Future FAIR Facility

A concept for the extraction of the most refractory elements at CERN-ISOLDE as carbonyl complex ions