Abstract:Titania (TiO 2 ) nanofibers were fabricated by electrospinning three representative spin dopes made of titanium (IV) n -butoxide (TNBT) and polyvinylpyrrolidone (PVP) with the TNBT/PVP mass ratio being 1/2 in three solvent systems including N,N -dimethylformamide (DMF), isopropanol, and DMF/isopropanol (1/1 mass ratio) mixture, followed by pyrolysis at 500 °C. The detailed morphological and structural properties of both the as-electrospun precursor nanofibers and the resulting final TiO 2 nanofibers were characterized by SEM, TEM, and XRD. The results indicated that the precursor nanofibers and the final TiO 2 nanofibers made from the spin dopes containing DMF alone or DMF/isopropanol mixture as the solvent had the common cylindrical morphology with diameters ranging from tens to hundreds of nanometers, while those made from the spin dope containing isopropanol alone as the solvent had an abnormal concave morphology with sizes/widths ranging from sub-microns to microns. Despite the morphological discrepancies, all precursor nanofibers were structurally amorphous without distinguishable phase separation, while all final TiO 2 nanofibers consisted of anatase-phased TiO 2 single-crystalline grains with sizes of approximately 10 nm. The electrospun TiO 2 nanofiber mat is expected to significantly outperform other forms (such as powder and film) of TiO 2 for the solar cell (particularly dye-sensitized solar cell) and photo-catalysis applications.

Fabrication and Characterization of Ag-TiO2 Composite Nanofibers

The Characterization and Preparation of Nano-Scale Fe Doping Tio2 by Sol-Gel Method (I) - the Crystallization and Thermal Decomposition Process of Fe Doping Tio2 Xerogel Powders Using Thermal Tg-Ir Spectrometry

Fabrication and characterization of FePt magnetic nanofibers via electrospinning technique

Fabrication and Photocatalytic Activity of Tio2 Nanofiber Membrane

Fabrication and characterization of electrospun titania nanofibers

Study on the Preparation and Photocatalytic Properties of Au/TiO2 Composite Fibers

Preparation and Photocatalytic Activity of TiO<sub>2</sub>/Fe<sub>2</sub>O<sub>3 &Lt;/sub>nanocomposite

Preparation and Characteristic of FexSy/TiO2 Composite Material Film

Fabrication and Characterization of NiTiO3 Nanofibers by Sol–gel Assisted Electrospinning

Fabrication of TiO 2 /sio 2 Hybrid Fibers with Tunable Internal Porous Structures

Preparation of heterostructured Ag/BaTiO3 nanofibers via electrospinning

Preparation and characterization of doped TiO2 nanofibers by coaxial electrospining combined with sol-gel process

Synthesis of Titanium Dioxide Nanotubes from Electrospun Fiber Templates

Fabrication and Optical Property Study of TiO2 Nanocrystalline Films by Sol-gel Methods

Preparation and Characterization of N-doped TiO2/C Composite

Controllable Fabrication of TiO(2) 1D-Nano/micro Structures: Solid, Hollow, and Tube-in-tube Fibers by Electrospinning and the Photocatalytic Performance.

Synthesis and characterization of rutile-typed TiO2 porous hollow nanofibres via electrospinning

Preparation and characterization of anatase titanium dioxide fibre by electrospinning

Fabrication of flexible TiO2 nanofibres by electrospinning and their photocatalytic properties

Enhanced Photocatalytic Activity of Electrospun TiO2 Nanofibers with Optimal Anatase/Rutile Ratio

Fabrication of Tio2/Cds Composite Fiber Via an Electrospinning Method