Abstract:In order to further enhance the erosion resistance of cement concrete pavement materials, this study constructed an apparent rough hydrophobic structure layer by spraying a micro-nano substrate coating on the surface layer of the cement concrete pavement. This was followed by a secondary spray of a hydroxy-silicone oil-modified epoxy resin and a low surface energy-modified substance paste, which combine to form a superhydrophobic coating. The hydrophobic mechanism of the coating was then analysed. Firstly, the effects of different types and ratios of micro-nano substrates on the apparent morphology and hydrophobic performance of the rough structure layer were explored through contact angle testing and scanning electron microscopy (SEM). Subsequently, Fourier transform infrared spectroscopy and permeation gel chromatography were employed to ascertain the optimal modification ratio, temperature, and reaction mechanism of hydroxy-silicone oil with E51 type epoxy resin. Additionally, the mechanical properties of the modified epoxy resin-low surface energy-modified substance paste were evaluated through tensile tests. Finally, the erosion resistance of the superhydrophobic coating was tested under a range of conditions, including acidic, alkaline, de-icer, UV ageing, freeze-thaw cycles and wet wheel wear. The results demonstrate that relying solely on the rough structure of the concrete surface makes it challenging to achieve superhydrophobic performance. A rough structure layer constructed with diamond micropowder and hydrophobic nano-silica is less prone to cracking and can form more "air chamber" structures on the surface, with better wear resistance and hydrophobic performance. The ring-opening reaction products that occur during the preparation of modified epoxy resin will severely affect its mechanical strength after curing. Controlling the reaction temperature and reactant ratio can effectively push the modification reaction of epoxy resin through dehydration condensation, which produces more grafted polymer. It is noteworthy that the grafted polymer content is positively correlated with the hydrophobicity of the modified epoxy resin. The superhydrophobic coating exhibited enhanced erosion resistance (based on hydrochloric acid), UV ageing resistance, abrasion resistance, and freeze-thaw damage resistance to de-icers by 19.41%, 18.36%, 43.17% and 87.47%, respectively, in comparison to the conventional silane-based surface treatment.

Study on Penetrant Efficiency and Anti-Ultraviolet Radiation Capability for Protection Coating of Concrete Structure

Study on the effect of cementitious capillary crystalline waterproofing materials on enhancing concrete anti-carbonization property

Performance of Silane -Based Surface Treatments for Protecting Degraded Historic Concrete

Evaluation of the Performance of Surface Treatments on Concrete Durability

Study on Permeable Coating for Anticorrosion of Concrete

Exploration into Anticorrosive Property of Antirust Compound-Admixture

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Experimental Research on Performance of Anti-corrosion Coating Against Chloride Ion Ingress into Concrete

A comparative study on UV degradation of organic coatings for concrete: Structure, adhesion, and protection performance

Design, Preparation, and Performance of a Novel Organic–inorganic Composite Coating with High Adhesion and Protection for Concrete

Study on corrosion mechanism of concrete and development of new protect mortar in the metallurgy condition

Development of Advanced Coatings and Surface-sand Preventing Metal Penetration in Large-size Steel Castings by Furan Resin Sand Process

Chloride Penetration of Surface-Coated Concrete: Review and Outlook

THE STATE OF THE ART OF CONCRETE STRUCTURE DURABILITY MONITORING AND RESTORATION

Development of a Superhydrophobic Protection Mechanism and Coating Materials for Cement Concrete Surfaces

Deterioration of Organic Coatings on Concrete under Artificial Aging

Permeable epoxy coating with reactive solvent for anticorrosion of concrete

Protective Performanmce of Nanocomposite Coating for Engineering Steel Components of Electric Power Facilities in Simulated Acid Rain Environment

Effects of Polyurethane Coating on Concrete Freezing Resistance

Performance tests on anti-fouling and anti-corrosion of coating materials

Preparation of Nano-SiO2 Modified Waterborne Polyurethane Coatings and Its Influence on the Anti-Permeability of Concrete