Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Hydrogen Sorption Properties of Mg-20wt. % Fe23y8 Composite Prepared by Reactive Mechanical Alloying

FeNiCu-based Composite Catalyst for Hydrogen Storage in MgH2

Hydrogen desorption properties of the MgH2-AlH3 composites

Hydrogen Storage Behaviors and Microstructure of MF3 (m=ti, Fe)-doped Magnesium Hydride

Synergistic Effect of LiBH4and LiAlH4Additives on Improved Hydrogen Storage Properties of Unexpected High Capacity Magnesium Hydride

The Hydrogen Storage Properties of MgH2–Fe3S4 Composites

Hydrogen Storage Performance of 5libh(4)+mg2feh6 Composite System

Hydrogen Sorption Behaviors of a Core–Shell Structured Mg@Fe Composite Powder (Special Issue on Advanced Materials for Hydrogen Energy Applications(2))

Hydrogen Sorption Behaviors of a Core–Shell Structured Mg@Fe Composite Powder

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Hydrogen Storage Properties of Mg-doped Ti 1.2 Fe Alloys Synthesized by Mechanical Alloying

Hydrogen Absorption/desorption Properties of Li–Al–N–H Composite

Facile Synthesized Fe Nanosheets As Superior Active Catalyst for Hydrogen Storage in MgH2

Hydrogen Storage Properties of a Mg-La-Fe-H Nano-Composite Prepared Through Reactive Ball Milling

Enhanced Hydrogen Storage Performance of LiAlH4–MgH2–TiF3 Composite

Optimizing FeCoNiCrTi High-Entropy Alloy with Hydrogen Pumping Effect to Boost De/hydrogenation Performance of Magnesium Hydride

Synthesis and Hydrogen Sorption Properties of MgH2 Composites with TiFe and Ti3Fe3O Additives

Improved Hydrogen Storage Performance of MgH2–LiAlH4 Composite by Addition of MnFe2O4

Influence of porous carbon loaded with iron particles on hydrogen storage performances of as-milled Mg-Al-Y alloy

Effects of Nano-Composites (feb, FeB/CNTs) on Hydrogen Storage Properties of MgH2