Experimental Study of HCl Emissions and Removal During Combustion of Coal Mixed and Diluted with Sewage Sludge

崔浩,张成,夏季,陈刚

2012-01-01

Abstract:Power generation by burning coal mixed and diluted with sewage sludge is a sludge treatment method with a relatively good prospect.However,a great amount of HCl gas produced during the combustion may result in such harms to the heating surfaces as corrosion and erosion.By making use of a horizontal tube type reactor,the authors studied the influence of such factors as temperature rise speed,combustion temperature,proportion of sludge mixed and diluted and reaction atmosphere etc.on the HCl release.Furthermore,the influence of the CaCO3 adding amount and temperature on the HCl removal efficiency was investigated and by using a GASMET DX4000 model infrared gas analyzer,the concentration of the HCl released was real-time measured.It has been found that with an increase of the proportion of the sludge mixed and diluted,the volume of the HCl released will increase while the conversion rate of Cl to HCl will decrease.To increase the temperature will promote the HCl release,however,after 600 ℃,the conversion rate of Cl to HCl will change little.The proportion of oxygen in the carrier gas will make a part of HCl converted into Cl2,resulting in a drop of the conversion rate of Cl to HCl in the sample.A high temperature rise speed will lead to a large peak value of HCl release.To increase the Ca/(S+0.5Cl) molar ratio will increase the HCl removal rate.When the Ca/(S+0.5Cl) molar ratio is 2,700 ℃ will be regarded as the optimum temperature for HCl removal.