Abstract:In the steel industry, blast furnace gas (BFG) is huge with complex components. The existence of hydrogen sulfide (H 2 S) in the BFG can produce sulfur dioxide (SO 2 ) after combustion, which will increase the source of SO 2 pollution and make the desulphurization more difficult, to be threat to people health. At present, the removal of H 2 S by dry adsorption with modified activated carbon adsorbent is a high-precision and low-cost desulphurization method. However, the effect of complex gas components in BFG on the adsorption of H 2 S by activated carbon adsorbent is not sufficient. Based on the fixed bed adsorbent evaluation system, a new type of highly efficient copper-cerium oxide (Cu–Ce–O) modified activated carbon H 2 S adsorbent was developed. And the effects of carbon monoxide (CO), carbon dioxide (CO 2 ), hydrogen (H 2 ), oxygen (O 2 ), sulfur dioxide and hydrogen chloride (HCl) in BFG on the desulfurization activity of adsorbents were investigated. The results showed that the performance of H 2 S removal decreased in the presence of CO, CO 2 , HCl and SO 2 , and improved in the presence of H 2 and O 2 . Other parameters were also studied which might influence the process. The application of modified activated carbon adsorbent in simulated BFG is basically stable. According to the fitting results of adsorption kinetics for the five adsorption models, as the atmosphere becomes BFG from N 2 , pore diffusion becomes the main adsorption form. However, the effects of internal diffusion, chemical adsorption and external mass transfer decreased. The Bangham model is the most suitable model to describe H 2 S adsorption process.

Removal of hydrogen sulfide gas by biological activated carbon fiber and bio-membrane

Experimental study of new desulfurizer for removal of H2S

Adsorption Mechanism and Regeneration Performance of Calcined Zeolites for Hydrogen Sulfide and Its Application

Experimental Study on Volatile Sulfur Compound Inhibition Using a Single-Chamber Membrane-Free Microbial Electrolysis Cell

Performance and Optimization of Integrated Biogas Bio-desulfurization Reactor

Removal of Hydrogen Sulfide in Cold Coal Gas by Anaerobic Bio-trickling Filter

Hydrogen sulfide removal from biogas in anaerobic fermentation by use of biological process

Combination Of Non-Thermal Plasma And Activated Carbon Fibers For Decomposition Of Hydrogen Sulfide

Study on selective hydrogen sulfide removal over carbon dioxide by catalytic oxidative absorption method with chelated iron as the catalyst

Removal of Hydrogen Sulfide in Biogas by DBD Plasma

Bamboo Derived Activated Carbon As Highly Efficient Catalysts for the Oxidation and Adsorption of Hydrogen Sulfide at Room Temperature

[Advances in Mechanism and Influencing Factors Affecting Hydrogen Sulfide Adsorption by Biochar].

Study on simultaneous removal of H2S by biological aerated filter in the course of domestic sewerage treatment

Biodegradation of carbon disulfide and hydrogen sulfide using a moving bed biofilm reactor coupled with sulfur recycling: Performance, mechanism, and potential application

Research Progress of Removal of H2S from Coal Gas by Dry Method

Mechanisms of Sulfur Selection and Sulfur Secretion in a Biological Sulfide Removal (BISURE) System

Effect of multi-component gas on removal of trace hydrogen sulfide activity from blast furnace gas using activated carbon adsorbent

H2S Gas Removal in the Biotrickling Filter with a Macroporous Carrier

Enhanced Desulfurization by Tannin Extract Absorption Assisted by Binuclear Sulfonated Phthalocyanine Cobalt Polymer: Performance and Mechanism

Catalytic Fixation of Hydrogen Sulfide over CuO-CaCO3 Co-Impregnated Tea Stalk-Derived Biochar

Selective Removal of H2S over CO2 in a Membrane Gas–liquid Microdisperison Microreactor