Abstract:Pressed 1,3,5‐triamino‐2,4,6‐trinitrobenzene (TATB)‐based polymer‐bonded explosive (PBX) exhibits significant anisotropic and irreversible expansion characteristics during temperature cycling, resulting in both safety and service issues. The anisotropic and irreversible expansion properties of PBX have shown to be closely related to the microstructures, including explosive crystals, binders, micro voids, el. Fiber Bragg grating (FBG) technology has advantages of high reliability, accuracy, and sensitivity, which is more conducive to real‐time capture of the changes in strain throughout the temperature cycling. In this study, temperature cycling strain monitoring experiments of PBX pressed under different thermal–mechanical coupling loading conditions were studied using FBG technology. The effect of the pressing parameters on the anisotropic and irreversible expansion characteristics of the PBX's during temperature cycling was measured and analyzed, taking into account potential microstructural factors such as crystal orientation, binders, and porosity. The results indicated that the strain on the side and top of PBX cylinders were distributed with increasing strain in the direction of higher density. The strain stratification was significant during the high‐temperature stage of temperature cycling and was not obvious during the low‐temperature stage. The degree of strain stratification decreased with an increase in temperature cycling cycles and increased with higher pressing temperatures. The anisotropic expansion of PBX cylinders increased with an increase in temperature during cycling and decreased with a reduction in temperature. The axial expansion degree of PBX cylinders pressed under different compression conditions in the later cycles of temperature cycling is consistent with the different crystal orientations intensity inside them.

Dynamic Behavior of Three PBXs with Different Temperatures

Effects of Temperature and Strain Rate on the Dynamic Responses of Three Polymer-Bonded Explosives

Dynamic Compressive Properties of a PBX Analog as a Function of Temperature and Strain Rate

Experimental Study on Dynamic Mechanical Properties of a Mock PBX

Investigating the Dynamic Compressive and Tensile Properties of Polymer Binder Explosive Based on the Split-Hopkinson Bar Technique

Mechanical Behavior of a PBX Substitute Material under Static and Dynamic Loading

Dynamic Mechanical Properties and Constitutive Relation of an Aluminized Polymer Bonded Explosive at Low Temperatures

Strain Measurement on a PBX during Temperature Cycling Using Fibre Bragg Gauges

Investigating the Static and Dynamic Tensile Mechanical Behaviour of Polymer‐bonded Explosives

Technique for Combined Dynamic Compression–Shear Testing of PBXs

Effects of Strain Rate and Temperature on Compressive Properties of an Aluminized PBX

Experimental Study on the Microstructures and Dynamic Behavior of a PBX Substitute Material

Dynamic Mechanical Behavior of PBX

Dynamic Compressive Properties of Polymer Bonded Explosives under Confining Pressure

Study on Compression–expansion Behaviour of PBXs Substitutive Materials

Deformation, fracture and mechanical properties of PBX under dynamic loading by using digital speckle correlation method

Effects of Concentration and Temperature on Mechanical Properties of Tatb/Pctfe Pbx by Molecular Dynamics Simulation

Microstructure, deformation and failure of polymer bonded explosives

Experimental Method of Mechanical Behavior of the JHB-1C Explosive at High Strain Rate

Using a Fiber Bragg Grating Technique to Investigate Temperature Cycling Strain of Pressed TATB‐based Polymer‐bonded Explosives

Experimental and Numerical Investigation of Dynamic Damage and Load Transfer of PBX Substitute Material under Low Velocity Impact