Abstract:Driven by an ever-growing demand for environmentally benign cooling systems, the past decade has witnessed the booming development in the field of electrocaloric (EC) cooling technology, which is considered as a promising solid-state cooling approach. Multilayer ceramic chip capacitors (MLCCs) represent the optimum structure for EC cooling elements because of large breakdown strengths, low driving voltages, and high macroscopic volumes of active EC materials. However, fundamental relationships between the geometric parameters of MLCCs and the EC coefficient are less understood. In this study, 0.92Pb(Mg1/3Nb2/3)O3-0.08PbTiO3 (PMN–PT) MLCCs with controlled configurations, such as active/inactive layer thickness, number of layers, and active volume ratio, were fabricated, and their EC performance was evaluated. The electric properties of the MLCCs are confirmed to be closely related to the geometric structure, which influences not only the heat flow but also the internal stress, resulting in the variability of EC performance and reliability/breakdown strength. The internal stress arises due to the residual thermal stress originating from the densification-related shrinkage, thermal expansion mismatch during the sintering, and clamping stress arising from the inactive area due to the large strain from the active area under a high electric field. The geometric structure-based stress distribution and the magnitude of stress on the active layers in MLCCs were determined by finite element modeling (FEM) and correlated with the experimental EC coefficients. The results reveal that a low inactive volume percentage is beneficial toward increasing the breakdown field and enhancement of EC performance because of reduced clamping stress on active EC material.This article has not yet been cited by other publications.

Research on Microstructure of the Electrode of MLCC

Influence of inner electrode on the microstructure of BZN based MLC

Failure analysis of electroplating on sliver termination in multilayer ceramic capacitors (MLCCs)

Influence of silver migration on dielectric properties and reliability of relaxor based MLCCs

Investigation of Ceramic-Metal Interfacial Behavior in Base Metal Electrode MLCC

Meniscus-confined Electrodeposition of Metallic Microstructures with In-Process Monitoring of Surface Qualities

Electro-plating technology of high performance low sintering MLC

In Situ SEM Observation of Structured Si/C Anodes Reactions in an Ionic-Liquid-Based Lithium-Ion Battery

Analysis of the Factors Influencing the Insulation Resistance in Preparation of Microwave MLCC

The Inner Electrode Structure Optimization Of High Voltage Mlccs

MOEMS 3D microstructure preparation method based on novel localized electrochemical deposition

A strategy to detect the effect of electrode defects on the electrical reliability in multilayer ceramic capacitors

Effect of Sintering Conditions on the Reliability of PMN-Based MLCC Against Electroplating

Simulation and Experimental Study on Metal Microstructure of Meniscus‐Confined Electrodeposition

Electrocaloric Performance of Multilayer Ceramic Chips: Effect of Geometric Structure Induced Internal Stress

Nickel diffusion in base-metal-electrode MLCCs

Research On Micro Electrode Fabrication Based On Ecm

Mechanism and Controlling of Silver Migration in Cofired Multilayer Devices with Ag-Pd Inner Electrodes

Ceramic Dielectrics for MLCCs

Sintering characteristics and dielectric properties of silver-doped PMN-PZN-PT relaxor ferroelectric ceramics

Research on Side-Insulation of Tool Electrode for Micro Electrochemical Machining