Abstract:The ability to efficiently and reliably transfer heat between sources and sinks is often a bottleneck in the thermal management of modern energy conversion technologies ranging from microelectronics to thermoelectric power generation. These interfaces contribute parasitic thermal resistances that reduce device performance and are subjected to thermomechanical stresses that degrade device lifetime. Dense arrays of vertically aligned metal nanowires (NWs) offer the unique combination of thermal conductance from the constituent metal and mechanical compliance from the high aspect ratio geometry to increase interfacial heat transfer and device reliability. In the present work, we synthesize copper NW arrays directly onto substrates via templated electrodeposition and extend this technique through the use of a sacrificial overplating layer to achieve improved uniformity. Furthermore, we infiltrate the array with an organic phase change material and demonstrate the preservation of thermal properties. We use the 3ω method to measure the axial thermal conductivity of freestanding copper NW arrays to be as high as 70 W m(-1) K(-1), which is more than an order of magnitude larger than most commercial interface materials and enhanced-conductivity nanocomposites reported in the literature. These arrays are highly anisotropic, and the lateral thermal conductivity is found to be only 1-2 W m(-1) K(-1). We use these measured properties to elucidate the governing array-scale transport mechanisms, which include the effects of morphology and energy carrier scattering from size effects and grain boundaries.

Thermal Behavior of Antimony Nanowire Arrays Embedded in Anodic Aluminum Oxide Template

Nanowire Thermometers.

Predicted Low Thermal Conductivities In Antimony Films And The Role Of Chemical Functionalization

Melting and recrystallizing behaviors of Bi nanowires in the pores of anodic aluminum oxide template by Joule heating

Thermal properties of bi nanowire arrays with different orientations and diameters

Antimony Nanowire Arrays Fabricated by Pulsed Electrodeposition in Anodic Alumina Membranes

Tailoring InSb Nanowires for High Thermoelectric Performance Using AAO Template-Assisted Die Casting Process

Abnormal resistance–temperature characteristic of the melting Bi nanowires

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Semimetal nanowires and their superlattices in anodic alumina membranes

The Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication of Silver Nanowires

Thermoelectric Properties of an Individual Suspended Single-Crystalline Sb2Se3 Nanowire

Bi2te3 Nanowire Array Preparation and Surface Polishing by Electrochemical Deposition

Synthesis of Moo (X) Nano-Arrays on Anodic Aluminum Oxide Template by Thermal Diffusion

Thermal Oxidation Of Cu2s Nanowires: A Template Method For The Fabrication Of Mesoscopic Cuxo(X=1,2) Wires

Templating Synthesis Of Uniform Bi2te3 Nanowires With High Aspect Ratio In Triethylene Glycol (Teg) And Their Thermoelectric Performance

Synthesis and Superconductivity of Electrochemically Grown Single-Crystal Aluminum Nanowires

Pulsed electrodeposition of single-crystalline Bi2Te3 nanowire arrays

Antimony Nanowires Self-Assembled from Sb Nanoparticles

Electrodeposition of Thermoelectric Superlattice Nanowires

Thermal Conduction in Vertically Aligned Copper Nanowire Arrays and Composites