Abstract:The General weight function expressions given in Gao (J. Mech. Phys. Solids37, 133, 1989), referred to here as part I, for combined-mode crack-dislocation interaction problems in the three-dimensional regime are applied to solve for the stress field and energy of a shear dislocation loop emerging from the tip of a half-plane crack. The results are compared to the previously proposed approximate estimates for shear loops by Anderson and Rice (J. Mech. Phys. Solids35, 743, 1987), who solved exactly for prismatic opening dislocation loops that are co-planar with the crack and also for the analogous 2-D cases of general crack tip-parallel line dislocations. The energy results are presented in terms of a correction factor m, following Anderson and Rice, to the usual estimate of energy for an emergent crack tip loop as half the energy of a full loop (identified as the emergent loop and its image relative to the crack front) in an uncracked solid. For a full circular shear loop the energy is U = [(2 − ν)μb2r/4(1-ν)] In (8r/e2r0), where r0 denotes the core cut-off parameter and μ, ν are the shear modulus and Poisson ratio. Thus for a semicircular loop emerging from the crack tip, the energy is expressed as U = [(2 − ν)μb2r/8(1-ν] In (8mr/e2r0), where the constant m depends on the orientation angle Ψ of the Burgers vector relative to a line normal to the crack tip and the inclination angle φ of the dislocated plane relative to the crack plane. The m factors are calculated at selected angles φ for rectangular and semicircular loops. This involves multiple numerical integrations based on the weight functions of part I, first to obtain the stress field and then to integrate it over the dislocated area to get the energy, and requires a large amount of computing CPU time. An approximate formula for m is proposed for general inclined dislocation loops, based on known 2-D results for m factors for arbitrary angles φ calculated by Anderson and Rice (1987) and the 3-D m(φ = 0) results given here for shear dislocation loops in the crack plane. It compares well to the exact results.

The Sink Strength of a Dislocation Loop in the Effective Medium Approximation

Fundamental Insights into the Mass Transfer Via Full Dislocation Loops Due to Alternative Surface Cuts

Modification on Theory of Sink Strength: an Object Kinetic Monte Carlo Study

Intrinsic Bias Differential Between Vacancy Loops and Interstitial Loops

Dislocation Bias in an Anisotropic Diffusive Medium and Irradiation Growth

Stress-induced Preferred Absorption Due to Saddle-Point Anisotropy: the Case of an Infinitesimal Dislocation Loop

Corrections to sink strengths used in rate equation simulations of defects in solids

The sink efficiency of symmetric tilt grain boundary under displacement cascade in zirconium

Cohesive Mohr–Coulomb interface effects on the strength criterion of materials with granular-based microstructure

Complex dislocation loop networks as natural extensions of the sink efficiency of saturated grain boundaries in irradiated metals

Sink strength of grain boundaries for point defects in irradiated ferritic/martensitic steel

Theory of dislocation loops in multilayered anisotropic solids with magneto-electro-elastic couplings

Crossed-state bowing and the strength of binary dislocation junctions

Theory of Irradiation Deformation in Non-Cubic Metals: Effects of Anisotropic Diffusion

Elastic Field of Approaching Dislocation Loop in Isotropic Bimaterial

Complete characterization of sink-strengths for mutually 1D-mobile defect clusters: Extension to diffusion anisotropy analog cases

Qualitative and quantitative properties of the dynamics of screw dislocations

Elastic Field Due to Dislocation Loops in Isotropic Multilayer System

Elastic Theory of Dislocation Loops in Three-Dimensional Isotropic Bi-Materials

Dislocation dynamics formulation for self-climb of dislocation loops by vacancy pipe diffusion

Application of 3-D weight functions—II. The stress field and energy of a shear dislocation loop at a crack tip