Abstract:Although heavy ion irradiation is a good tool to simulate neutron irradiation-induced damages in light water reactor, it produces inhomogeneous defect distribution. Such difference in defect distribution brings difficulty in comparing the microstructure evolution and mechanical degradation between neutron and heavy ion irradiation, and thus needs to be understood. Stainless steel is the typical structural material used in reactor core, and could be taken as an example to study the inhomogeneous defect depth distribution in heavy ion irradiation and its influence on the tested irradiation hardening by nano-indentation. In this work, solution annealed stainless steel model alloys are irradiated by 3MeV Fe2+ ions at 400°C to 3dpa to produce Frank loops that are mainly interstitial in nature. The silicon content of the model alloys is also tuned to change point defect diffusion, so that the loop depth distribution influenced by diffusion along the irradiation beam direction could be discussed. Results show that in low Si (0% Si) and base Si (0.42% Si) samples the depth distribution of Frank loop density quite well matches the dpa profile calculated by the SRIM code, but in high Si sample (0.95% Si), the loop number density in the near-surface region is very low. One possible explanation could be Si’s role in enhancing the effective vacancy diffusivity, promoting recombination and thus suppressing interstitial Frank loops, especially in the near-surface region, where vacancies concentrate. By considering the loop depth distribution, the tested irradiation hardening is successfully explained by the Orowan model. A hardening coefficient of around 0.30 is obtained for all the three samples. This attempt in interpreting hardening results may make it easier to compare the mechanical degradation between different irradiation experiments.

Sink strength of grain boundaries for point defects in irradiated ferritic/martensitic steel

Defect Effects on Grain Boundary Strength in Fe: A Molecular Dynamics Simulation

Formation and stability of the early stage solute and defect clusters in Cu-free ferritic steels during irradiation

Radiation Induced Grain Boundary Segregation in Ferritic/martensitic Steels

Irradiation-induced Grain Growth in Nanocrystalline Reduced Activation Ferrite/martensite Steel

Irradiation-induced segregation/desegregation at grain boundaries of a ferritic Fe-Mn-Si steel

Microstructure-specific Hardening of Ferritic-Martensitic Steels Pre and Post 15 Dpa Neutron Irradiation at 330 °C: A Dislocation Dynamics Study

Complex dislocation loop networks as natural extensions of the sink efficiency of saturated grain boundaries in irradiated metals

Investigation of Nano-Scale Segregation in Nanostructured Ferritic Alloy 14YWT after Heavy Ion Irradiation

Depth Distribution of Frank Loop Defects Formed in Ion-Irradiated Stainless Steel and Its Dependence on Si Addition

Effect of irradiation and irradiation defects on the mobility of Σ5 symmetric tilt grain boundaries in iron: An atomistic study

Examining the Effects of Irradiation Temperature on Defect Generation and the Nature of Dislocation Loops

Principal Physical Parameters Characterizing the Interactions Between Irradiation-Induced Point Defects and Several Tilt Symmetric Grain Boundaries in Fe, Mo and W

Grain Boundary Defect Production during Successive Displacement Cascades on a Tungsten Surface

Multi-scale modeling of the effects of temperature, radiation flux and sink strength on point-defect and solute redistribution in dilute Fe-based alloys

Grain boundary metastability controls irradiation resistance in nanocrystalline metals

Irradiation-induced Segregation at Phase Boundaries in Austenitic Stainless Steel Weld Metal

The sink efficiency of symmetric tilt grain boundary under displacement cascade in zirconium

First-Principles Calculations to Investigate the Influence of Irradiation Defects on the Swelling Behavior of Fe-13Cr Alloys

Effect of sink strength on coherency loss of precipitates in dilute Cu-base alloys during in situ ion irradiation

Comparative Analysis of Irradiation-stimulated Hardening in the Austenite and Ferrite Phases of F321 Stainless Steel