Analysis on loading capacity of point-supported laminated glass unit by FDM

Yong-jiu SHI,Ying MA,Yuan-qing WANG

DOI: https://doi.org/10.3969/j.issn.1007-4708.2007.05.022

2007-01-01

Abstract:PVB interlayer's shearing modulus changes with duration and temperature,which brings much difficulty in point-supported laminated glass unit's design.What's more,because laminated glass plates are produced with relatively thin interlayers,as a sufficiently small aspect ratio of the elements should not be exceeded,a high number of elements has to be used when using finite element method.This paper calculates the laminate's displacement by finite difference method,which solves above problems.In the calculation example a 10×10 uniform finite difference mesh was used,and comparisons with short-period and 7-day-period tests were made.The curve at 20℃ meets with experimental results well.As the shear deformation is large(exceeds 60% of the total deformation sometimes),it should be accounted for in design.The current code neglects the interlayer's shear-resisting effect and gets conservative results.Since the properties of the PVB interlayer differ depending on the manufacturer and the aging process has an influence on the shear modulus,more experiments on domestic products should be carried out,and economic design could be made based on the laminate unit's G value.