Abstract:Power output at the low engine speed is limited for natural gas engines, even though the turbocharging technology is used. In this paper, the intake system of a turbocharged spark-ignition natural gas engine with 4 valves (2 intake valves and 2 exhaust valves) was optimized by considering the intake strategy effects on the engine torque output and fuel economy improvement. Firstly, a 1D numerical model with hierarchical 1D/3D approach based on GT-SUITE was developed and validated against the experimental data of engine torque and fuel consumption rate. This approach combined detailed analysis of in-cylinder flow, charge movement and combustion. Secondly, different intake strategies were designed and their effects on the intake mass flow rate and in-cylinder mass during the intake process, the swirl flow, tumble ratio and the turbulent kinetic energy during the compression process, the flame propagation and temperature distribution evolution after the spark ignition, and the pressure and heat release rate were numerically investigated. The results showed that compared with the original intake strategy, the asynchronized intake strategy (the intake valves close earlier and the intake valve lifts are reduced, while two intake valves have different intake strategy) reduces the backflow in the end of intake stroke, improves the in-cylinder swirl flow, increases the maximum heat release rate and shortens the combustion duration, and it is believed to be the optimized intake strategy. Finally, different cam profiles corresponding to the numerically designed intake strategies were applied to the bench test engine and the dyno experiments showed that the optimized intake strategy improves the torque and reduces the brake specific fuel consumption by 41.42% and 8.1% respectively at a low engine speed of 1200 rpm.

Power Oriented Cam Profile Optimization for Gasoline Engine

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Simulation analysis and performance optimization of the combustion process of the opposed cam piston engine

Performance Analysis and Optimization of a 2.0L Gasoline Engine based on GT-Power Simulation

Design of Unsymmetrical Cam Profiles for a High Speed Diesel Engine with Side-Mounted Camshaft

PARAMETERIZED-PROTOTYPE-BASED DYNAMIC OPTIMIZATION DESIGN FOR CAM PROFILE

Low-speed performance compensation of a turbocharged natural gas engine by intake strategy optimization

Numerical Simulation of HCNG Engine on GT-Power

Simulation Modeling and Optimization of Uniflow Scavenging System Parameters on Opposed-Piston Two-Stroke Engines

Optimization of Gasoline Engine Intake System Based on 1D, 3D and Coupled Simulations

Performance Optimization of Diesel Engine with Electro-Hydraulic Driven Valves

Power and fuel economy optimizations of gasoline engines using hydraulic variable valve actuation system

Turbocharging Matching and Performance Parameter Optimization of Vehicle Natural Gas Engine

Model-based Computational Intelligence Multi-Objective Optimization for Gasoline Direct Injection Engine Calibration

Valve Timing Based Optimization of Diesel Engine with High Exhaust Back Pressure

Power Reduction Problem of Retrofitted LNG Engine with High-Speed Gasoline Engine

Performance Analysis and Optimization for Car

Structure Optimization of Natural Gas Engine’s Intake Pipe Based on One-Dimensional and Three-Dimensional Coupled Simulation

Optimization of Piston Bowl and Valve System in Compression Ignition Engine Fueled with Gasoline/diesel/polyoxymethylene Dimethyl Ethers for High Efficiency

Dynamic Performance Research and Design Optimization of Gasoline Engine Timing Sprocket

Digital twin-driven optimization of gas exchange system of 2-stroke heavy fuel aircraft engine