Abstract:In this paper, the second form of quadrilateral area coordinate method (QACM-II) was employed to develop a novel 4-node quadrilateral membrane element insensitive to mesh distortion. First, two stress functions in terms of the QACM-II ( S , T ) are given to represent exact solutions of pure bending state in x and y directions. Their linear combination can reflect exact solutions for pure bending in all directions because the QACM-II is a local natural coordinate system. Thus, the basic analytical solutions of stresses, strains and displacements corresponding to the pure bending state for the isotropic and anisotropic plane problems can be obtained. Then, the unsymmetric element technique was adopted to formulate an unsymmetric 4-node, 8-DOF (2DOFs per node) quadrilateral membrane element. This approach is derived from the virtual work principle, and uses different test and trial functions. The test function employs the isoparametric coordinate interpolation to satisfy inter-element compatibility, while the trial function adopts a novel composite coordinate interpolation of the Cartesian coordinates and QACM-II to satisfy the completeness requirements in physical space. Due to the linear relationship between quadrilateral area and Cartesian coordinates, the order of trial displacement fields will not degrade when the meshes are distorted. Since the test displacement fields satisfy the compatibility requirements and the trial displacement fields contain analytical solutions of pure bending in all directions, the new element can produce exact solutions in both constant stress/strain patch test and pure bending problem in any directions, which means the well-known contradiction declared by MacNeal’s theorem: any 4-node, 8-DOF plane membrane element will either lock in in-plane bending or fail to pass a C 0 patch test when the element’s shape is an isosceles trapezoid, has been perfectly broken through. The authors would like to acknowledge the financial supports of the National Natural Science Foundation of China (Project No. 11272181), the Specialized Research Fund for the Doctoral Program of Higher Educationof China (Project No. 20120002110080), and Tsinghua University Initiative Scientific Research Program (Project No. 2014z09099).

A New Quadrilateral Thin Plate Element Based on the Membrane-Plate Similarity Theory

A NEW TYPE OF PLATE BENDING ELEMENT

TRIANGULAR THIN-PLATE ELEMENT BASED ON VECTOR FORM INTRINSIC FINITE ELEMENT

Analytical 3-D P-Element for Quadrilateral Plates - Part 1: Thick Isotropic Plate Structures

Four-node Membrane Element of Vector Form Intrinsic Finite Element for Large Deformation Analysis of Membrane Structures

A NEW C_1 CONFOMING QUADRILATERAL THIN PLATE BENDING ELEMENT

Development of triangular flat-shell element using a new thin-thick plate bending element based on semiLoof constrains

A new twelve DOF quadrilateral element for analysis of thick and thin plates

A 4-Node Quadrilateral Flat Shell Element Formulated by the Shape-Free Hdf Plate and Hsf Membrane Elements

Quadrilateral thin-thick plate bending element by using area coordinate method

QUADRILATERAL THIN PLATE ELEMENTS FORMULATED BY THE AREA COORDINATE METHOD AND THE SHAPE FUNCTION SPECTRUM METHOD

An Unsymmetric 4-Node, 8-Dof Plane Membrane Element Perfectly Breaking Through Macneal'S Theorem

Development of a New Quadrilateral Thin Plate Element Using Area Coordinates

A practical quadrilateral membrane element with drilling degrees of freedom

A New Generalized Conforming Triangular Element for Thin Plates

Application of the quadrilateral area coordinates: A 4-node quadrilateral membrane element beyond MacNeal’s theorem

A Mindlin Plate Triangular Element with Improved Interpolation Based on Timoshenko's Beam Theory

Generalized Conforming Trefftz Element For Size-Dependent Analysis Of Thin Microplates Based On The Modified Couple Stress Theory

Application of the Quadrilateral Area Coordinate Method:A New Element for Laminated Composite Plate Bending Problems

Application of the Quadrilateral Area Co‐ordinate Method: a New Element for Mindlin–Reissner Plate

An Efficient 3-Node Triangular Plate Element for Static and Dynamic Analyses of Microplates Based on Modified Couple Stress Theory with Micro-Inertia