Abstract:Ternary metal carbide TiAlC has been proposed as a metal gate material in logic semiconductor devices. It is a hard-to-etch material due to the low volatility of the etch byproducts. Here, a simple, highly controllable, and dry etching method for TiAlC has been first presented using nonhalogen N2/H2 plasmas at low pressure (several Pa) and 20 °C. A capacitively coupled plasma etcher was used to generate N2/H2 plasmas containing active species, such as N, NH, and H to modify the metal carbide surface. The etch rate of TiAlC was obtained at 3 nm/min by using the N2/H2 plasma, whereas no etching occurred with pure N2 plasma or pure H2 plasma under the same conditions. The surface roughness of the TiAlC film etched by N2/H2 plasma was controlled at the atomic level. A smooth etched surface was achieved with a root-mean-square roughness of 0.40 nm, comparable to the initial roughness of 0.44 nm. The plasma properties of the N2/H2 plasmas were diagnosed by using a high-resolution optical emission spectrometer, detecting the NH molecular line at 336 nm. The etching behavior and plasma-surface reaction between N2/H2 plasma and TiAlC were investigated by using in situ spectroscopic ellipsometry, in situ attenuated total reflectance-Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy. The findings indicate that the N-H, C-N, and Ti(Al)-N bonds form on the TiAlC surface etched by the N2/H2 plasmas. The mechanism for etching of TiAlC involving transformation reactions between inorganic materials (metal carbides) and inorganic etchants (N2/H2 plasma) to form volatile organic compounds such as methylated, methyl-aminated, and aminated metals is proposed. Nonhalogen or nonorganic compound etchants were used during the etching process. The study provides useful insights into microfabrication for large-scale integrated circuits.

Study on the Reactive Ion Etching of AlCu Alloy

Reactive Ion Etching of Al-1%Cu Alloy Thin Films

Reactive Ion Etching and Oes Endpoint Detection of Alcu Thin Film

Study on the Reactive Ion Etching of Si_3N_4

Studies on ethylene oxychlorination I. physical structure and chemical constitution of the catalyst surface

Optimization Study on the Reactive Ion Etching for SiO_2

Anodic behavior in AlCl3-EMIC ionic liquid of Ti6Al4V alloy and its application for enhancing the adhesion strength of aluminum coatings

Influence of Etchants on Etched Surfaces of High-Strength and High-Conductivity Cu Alloy of Different Processing States

High Selective Etching of Aluminum Alloys in High Plasma Density Reactor

Characterization of the Anodic Film and Corrosion Resistance of an A535 Aluminum Alloy after Intermetallics Removal by Different Etching Time

REACTION SIMULATION AND EXPERIMENT OF A Cl2/Ar INDUCTIVELY COUPLED PLASMA FOR ETCHING OF SILICON

The reactive ion etching characteristics of AlGaN/GaN SLs and etch-induced damage study of n-GaN using Cl2/SiCl4/Ar plasma

Reactive Ion Beam Etching of Hfo2 Film and Removal of Sidewall Redeposition

Effect of Alkaline Etching on Formation Behavior and Corrosion Resistance of a Cr-Zr-Ti TCP Conversion Coating on AA2024 Aluminum Alloy

Dry Etching Characteristics of Algan/Gan Heterostructures Using Inductively Coupled H-2/Cl-2, Ar/Cl-2 and Bcl3/Cl-2 Plasmas

Experimental Investigation on Chemical Mechanical Polishing of ZA27 Alloy Considering Galvanic Corrosion at Zn/Al Interface

Threshold Ion Energies and Cleaning of Etch Residues During Inductively Coupled Etching of NiO/Ga2O3 in BCl3

The Role of EDTA-2K in the Chemical Mechanical Polishing of Aluminum

Etching of iron and iron–chromium alloys using ICP-RIE chlorine plasma

Nonhalogen Dry Etching of Metal Carbide TiAlC by Low-Pressure N2/H2 Plasma at Room Temperature

Research on Ar/CHF3 reactive ion beam etching of SO2