Abstract:Simple and sensitive electrochemical sensors were fabricated from cerium oxide (CeO 2 ) and copper-benzene tricarboxylic acid–modified cerium oxide (CeO 2 -Cu-BTC) materials for differential pulse voltammetric analysis of toxic cadmium (Cd) ions in aqueous solutions. The materials were prepared by hydrothermal method and structurally characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction analysis (XRD). The CeO 2 -modified carbon paste electrode (CeCPE) and the CeO 2 -Cu-BTC-modified carbon paste electrode (CeBCPE) were electrochemically characterized by their cyclic voltammetry and electrochemical impedance study in standard K 3 [Fe(CN) 6 ] single-electron redox process. Their electrochemical surface areas, electrode surface coverages, and charge transfer resistances were calculated to be 1.46 cm 2 , 2.338 × 10 −5 mol∙cm −2 , and 2790 Ω and 5.48 cm 2 , 2.476 × 10 −5 mol∙cm −2 , and 1254.65 Ω for CeCPE and CeBCPE, respectively. These fabricated electrodes were used as electrochemical sensors for cadmium ion estimation by optimizing the experimental parameters through differential pulse voltammetry The optimized conditions included 10% modifier for CeCPE and 5% modifier for CeBCPE in 0.12 M HCl solution of pH 5 as supporting electrolyte at − 1.2 V deposition for 30 s in 0.01 to 10 mg L −1 linear cadmium solution range. Under these conditions, the limit of quantification (LOQ) of 0.368 mg L −1 and 0.005 mg L −1 was calculated for CeCPE and CeBCPE electrodes, respectively. The limit of detection (LOD) was calculated to be 0.121 mg L −1 and 0.002 mg L −1 for CeCPE and CeBCPE, respectively. All the experimental results indicated that electrodes fabricated from CeO 2 -Cu-BTC show better performance as compared to CeO 2 -based electrodes. Both these types of electrochemical sensors presented good repeatability and performance in the presence of interfering ions as well. From these findings, it can also be inferred that these electrochemical sensors can provide a simple and very sensitive method for approximation of toxic cadmium ions in aqueous solutions.

Voltammetric Determination of Cadmium(ii) Using a Chemically Modified Electrode

An Electrochemical Sensor for the Determination of Trace Concentrations of Cadmium, Based on Spherical Glassy Carbon and Nanotubes

Copper Film Modified Glassy Carbon Electrode and Copper Film with Carbon Nanotubes Modified Screen-Printed Electrode for the Cd(II) Determination

Detection of cadmium (II) ion in water by a novel electrochemical sensor based on modification of graphite carbon nitride and polyaniline composite

Poly(2-Amino-4-Thiazoleacetic Acid)/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrodes for the Electrochemical Detection of Copper(Ii)

Oscillography Double Potentiometric Titration of Cadmium(Ⅱ) Using Modified Platinum Electrode

High Sensitivity and Reproducibility of a Bismuth/Poly(bromocresol Purple) Film Modified Glassy Carbon Electrode for Determination of Trace Amount of Cadmium by Differential Pulse Anodic Stripping Voltammetry

Voltammetric determination of cadmium(II), lead(II) and copper(II) with a glassy carbon electrode modified with silver nanoparticles deposited on poly(1,8-diaminonaphthalene)

Selective Voltammetric Determination of Cd(II) by Using N,S-codoped Porous Carbon Nanofibers.

A novel electrochemical sensor modified with carbon nanocomposites and ion‐imprinted polymers and its high selectivity for cadmium ion detection in real samples

Highly sensitive electrochemical Cd(II) detector based on ion-imprinted modified glassy carbon electrode

A Highly Sensitive Electrochemical Sensor for Cd2+ Detection Based on Prussian Blue-PEDOT-Loaded Laser-Scribed Graphene-Modified Glassy Carbon Electrode

Bismuth-Coated Thick-Film Carbon Electrodes for the Detection of Lead and Cadmium by Anodic Stripping Voltammetry

Ca-MOF-Polymer Modified Thin-Film Electrode for Detection of Toxic Cadmium (Cd2+) in Biofluid and Environmental Fluid

A new electrochemical sensor based on a screen-printed electrode modified with an ion-imprinted PEDOT for the detection and the quantification of Cd(II)

Polytetrafluorethylene Membrane-Based Liquid Three-Phase Micro Extraction Combined with in situ Differential Pulse Anodic Stripping Voltammetry for the Determination of Cadmium Ions Using Au-Nanoparticles Sol-Gel Modified Pt-Wire

Differential pulse anodic stripping voltammetric determination of Cd and Pb at a bismuth glassy carbon electrode modified with Nafion, poly(2,5-dimercapto-1,3,4-thiadiazole) and multiwalled carbon nanotubes

WO3-Nanocrystal-Modified Electrodes for Ultra-Sensitive and Selective Detection of Cadmium (Cd2+) Ions

Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode

Determination of Cu2+ Using Poly(2-aminothiazole)/Multi-Walled Carbon Nanotubes Composite Film Modified Glassy Carbon Electrodes

Development of a robust method for Cd(II) ions analysis using CeO2- and CeO2-Cu-BTC-based electrochemical sensors