Abstract:Ion beam-assisted deposition (IBAD) has been proposed as a promising texturing technology that uses the film epitaxy method to obtain biaxial texture on a non-textured metal or compound substrate. Magnesium oxide (MgO) is the most well explored texturing material. In order to obtain the optimal biaxial texture, the actual thickness of the IBAD-MgO film must be controlled within 12nm. Due to the bombardment of ion beams, IBAD-MgO has large lattice deformation, poor texture, and many defects in the films. In this work, the solution deposition planarization (SDP) method was used to deposit oxide amorphous Y2O3 films on the surface of Hastelloy C276 tapes instead of the electrochemical polishing, sputtering-Al2O3 and sputtering-Y2O3 in the commercialized buffer layer. An additional homogeneous epitaxy MgO (epi-MgO) layer, which was used to improve the biaxial texture in the IBAD-MgO layer, was deposited on the IBAD-MgO layer by electron-beam evaporation. The effects of growth temperature, film thickness, deposition rate, and oxygen pressure on the texture and morphology of the epi-MgO film were systematically studied. The best full width at half maximum (FWHM) values were 2.2° for the out-of-plane texture and 4.8° for the in-plane texture for epi-MgO films, respectively. Subsequently, the LaMnO3 cap layer and YBa2Cu3O7-x (YBCO) functional layer were deposited on the epi-MgO layer to test the quality of the MgO layer. Finally, the critical current density of the YBCO films was 6 MA/cm2 (77 K, 500 nm, self-field), indicating that this research provides a high-quality MgO substrate for the YBCO layer.

Fabrication of long-length ion beam-assisted deposited MgO templates for YBCO-coated conductors

Preparation of MgO Self-Epitaxial Films for YBCO High-Temperature Coated Conductors

Preparation of Double-Sided MgO Template for YB2Cu3O7-δ Coated Conductors

Growth of Simplified Buffer Template on Flexible Metallic Substrates for YBa2Cu3O Coated Conductors

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

Fabrication of Ibad-Mgo and Pld-Ceo2 Layers for Ybco Coated Conductors

Fabrication of YBCO Coated Conductors on Biaxial Textured Metal Substrate by All-Sputtering

Reel-To-Reel Deposition of Epitaxial Double-Sided Mgo Buffer Layers for Coated Conductors

Preparation And Characterization Of Chemical Solution Derived Templates For Coated Conductors

MOCVD Derived Double-Sided YBa2Cu3O7−δ Films on Y2O3/YSZ/CeO2 Buffered Textured Metal Substrates

Influence of Assisting Ion Beam Current on the Microstructure and Surface Morphology of Ibad-Mgo Thin Films for Ybco Coated Conductors

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors

Simultaneous double-sided deposition of long-length epitaxial CeO 2 buffer layers for YBCO coated conductors

MOCVD Preparation of YBCO Coated Conductors on CeO2/YSZ/Y2O3 Buffered RABiTS Substrate

Much Simplified Ion-Beam Assisted Deposition-Tin Template for High-Performance Coated Conductors

Epitaxial Growth and Characterization of RF-Sputtered LaMnO 3 Cap Layers on Homo-Epi MgO/IBAD–MgO Templates

RECENT PROGRESS IN COATED CONDUCTORS BY IBAD METHOD AND THE PREPARATION OF LONG YSZ/HASTELLOY SUBSTRATES

Tailoring surface roughness of LaMnO 3 buffer layers for YBCO-coated conductors

Preparation and Characterization of Ceo2/Ysz/Ceo2 Buffer Layers for Ybco Coated Conductors

Development of High Critical Current YBCO Coated Conductors by Photo-Assisted MOCVD

Temperature-Modulated Growth of MOCVD-Derived YBa2Cu3O7−x Films on IBAD-MgO Templates