Abstract:The size and distribution of Sc 2 O 3 in the composite powder precursor has great effect on the emission property of scandate cathode. By one-step in-situ synthesis method, the composite powder exhibits the structure of quasi-spherical Sc 2 O 3 nanoparticles grown in situ on the surface of W/Ir grains, and the obtained W–Ir cathode with 3wt % Sc 2 O 3 could provide the emission current density of 83.43 A/cm 2 at 900 °C b , which is higher than other W–Ir mixed matrix scandate cathodes and W matrix scandate cathode. The XRD results showed that the high emission ability depended on the high content of active phase α-Ba 2 ScAlO 5 and low content of non-active phase BaAl 2 O 4 . In-situ TEM has been applied to observe the microstructure evolution of the cathode surface at high temperature for the first time. A serial change in the microstructural features of cathode surface and the migration of Ba, Sc and O on the substrate surface has been found, confirming the formation of Ba-Sc-O active layer. The first-principles calculations indicate that the active substances (Sc) are more stable (low adsorption energy of − 8.58 eV) on the IrW matrix cathode surface than on the tungsten matrix cathode surface, which is consistent with the low evaporation rate of the active substance detected by TFMS technique. Besides, the interaction between the active substance and the matrix was strengthened due to more electron transfer of Sc (1.88 e) and Ba (1.45 e), therefore lowering the work function. The feasible preparation technique makes such a cathode promising for applications in high-power microwave devices.

High Current Density Sc2O3-W Matrix Dispenser Cathode

Studies on the Pressed Yttrium Oxide-Tungsten Matrix As A Possible Dispenser Cathode Material

A New Dispenser Cathode with Dual-Layer

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Understanding the surface structure evolution and electron emission behaviors during the activation of Ir-coated dispenser cathodes

Study on Low-Temperature Emission Performance of Scandate Cathode with Micro-Blade-Type Arrays

The effect of Ir and Sc on the emission capacity of W–Ir matrix scandate cathodes prepared via a novel in situ method

High-current electron emission characteristics of cathodes based on diamond films

High Emission Current Density Electron Gun for a 263 GHz Sheet Beam Traveling Wave Tube

High Current Density Nanofilament Cathodes for Microwave Amplifiers

High Performance Operation of a Direct-Current and Superconducting Radio-Frequency Combined Photocathode Gun

Experimental study on the DC discharge characteristics of wire-to-cylinder electrode configuration at high temperature

Outstanding Field Emission Properties Of Wet-Processed Titanium Dioxide Coated Carbon Nanotube Based Field Emission Devices

ACCELERATED LIFE TEST STUDIES OF NEW COATED DISPENSER CATHODES

Experimental research of different plasma cathodes for generation of high-current electron beams

Enhancing the thermionic electron emission performance of hafnium with nanocluster doping

High brightness CW electron beams from Superconducting RF photoemission gun

Effect of Sr-Doping on the Emission-Active Materials of Scandate Cathodes

High-intensity polarized electron gun featuring distributed Bragg reflector GaAs photocathode

Copper Cathode’s Ablated Structure Operated in a 50 Megawatt Arc Heater

High Current Performance of Alkali Antimonide Photocathode in LEReC DC Gun