Abstract:A mathematical model was presented to predict the performance of a total heat exchanger with a vapour-permeable membrane core. The model considers combined heat and mass transfer as well as pressure drop in the core. The model provides analytical expressions for the heat and moisture transfer resistances through the membranes, both of which are operating condition dependent. Numerical calculations are carried out to investigate the effects of the membrane core geometry, the membrane physical property and the outdoor air state on the exchanger performance. The core geometry includes the membrane spacing (channel height) and thickness, the membrane property includes the membrane transport and adsorption parameters, and the outdoor air state includes the outdoor air temperature and humidity. The calculation results show that under equal fan power condition, as the channel height increases, the total heat transfer rate initially increases, after attaining to a maximum, turns to decrease, whereas the enthalpy effectiveness monotonously decreases. As the moisture diffusivity in membrane increases, the total heat transfer rate increases; as the membrane adsorption constant increases, the total heat transfer rate initially increases, after reaching a maximum, turns to decrease. Similar changes are observed for the enthalpy effectiveness. As the outdoor air temperature or humidity increases, the total heat transfer rate increases. For fixed outdoor temperature, as the outdoor humidity increases, the enthalpy effectiveness initially decreases to a minimum and then increases. The enthalpy effectiveness decreases with increasing outdoor temperature for low outdoor humidities but shows little change with the outdoor temperature for higher humidities.

Numerical study of heat and mass transfer in an enthalpy exchanger with a hydrophobic-hydrophilic composite membrane core

Performance of Heat and Mass Transfer Based on Hydrophilic/hydrophobic Composite Membrane

Heat and mass transfer in a cross-flow membrane-based enthalpy exchanger under naturally formed boundary conditions

Membrane-based Enthalpy Exchanger: Material Considerations and Clarification of Moisture Resistance

Heat and Mass Transfer in Plate-Fin Enthalpy Exchangers with Different Plate and Fin Materials

Conjugate Heat and Mass Transfer in a Total Heat Exchanger with Cross-Corrugated Triangular Ducts and One-Step Made Asymmetric Membranes

Coupled Heat and Mass Transfer in an Application-Scale Cross-Flow Hollow Fiber Membrane Module for Air Humidification

Heat and Mass Transfer in a Total Heat Exchanger: Cross-Corrugated Triangular Ducts with Composite Supported Liquid Membrane

An analytical solution for heat mass transfer in a hollow fiber membrane based air-to-air heat mass exchanger

Effectiveness Correlations for Heat and Moisture Transfer Processes in an Enthalpy Exchanger with Membrane Cores

Conjugate Heat and Mass Transfer in Membrane-Formed Channels in All Entry Regions

Heat and Moisture Transfer in Application Scale Parallel-Plates Enthalpy Exchangers with Novel Membrane Materials

Parametric Studies On Membrane-Based Total Heat Exchanger Performance

Investigation of Membrane-Based Total Heat Exchangers with Different Structures and Materials

Coupled Heat And Mass Transfer Through Asymmetric Porous Membranes With Finger-Like Macrovoids Structure

Analysis and simulation of the coupled mass and heat transfer in the process of moisture exchange across a membrane

3D Numerical Simulation of Heat and Mass Transfer of Fin-and-tube Heat Exchanger under Dehumidifying Conditions

Fluid Flow and Heat Mass Transfer in Membrane Parallel-Plates Channels Used for Liquid Desiccant Air Dehumidification

Heat and mass transfer in plate-fin sinusoidal passages with vapor-permeable wall materials

Heat and mass transfer in a quasi-counter flow membrane-based total heat exchanger

Numerical Simulation of a Wavy Fin-and-Tube Heat Exchanger Under Wet Conditions