Abstract:Membrane-based liquid desiccant dehumidification has great advantages over traditional method, particularly in avoiding liquid droplets moving into the process air. This paper proposes a simple model to predict the transient performance of the hollow fiber membrane-based dehumidification module. To simplify the fiber-to-fiber influence, the modeled membrane module is assumed to be a parallel-plates heat mass exchanger. The model has been calibrated and validated with a transient experiment reasonably well. Impacts of various parameters on the transient performance were studied by using the proposed model. The results show that the variation of air temperature is more significant than air humidity. The absorption heat of water vapor is the main resistance of heat and mass transfer. It initially restricts the growth of the cooling effectiveness, and then limits the driving potential for moisture transfer. Therefore, it brings the dehumidification effectiveness down. It is found that reducing the heat capacity rate ratio can reduce the equilibrium time, and increase the cooling and dehumidification effectiveness. The high packing density increases the dehumidification effectiveness with a negligible effect of somewhat drop in cooling effectiveness. By contrast, the geometry of the fiber packing arrangement has little influence on dynamic performance of the module formed by numerous fibers. The membrane module can fit the change of weather conditions by varying solution temperature on the inlet of the dehumidifier with the help of this dynamic model. The cooling and dehumidification effectiveness also increase to improve heat and mass transfer performance of the dehumidifier under the adjustment.

Coupled Heat and Mass Transfer in an Application-Scale Cross-Flow Hollow Fiber Membrane Module for Air Humidification

Coupled heat and mass transfer in a counter flow hollow fiber membrane module for air humidification

AIR HUMIDIFICATION WITH HOLLOW FIBER MEMBRANES: NEW IMPACTS ON CONJUGATED HEAT AND MASS TRANSFER

Modeling heat and mass transfer through a gas-to-gas hollow-fiber membrane humidifier with cross- and counter-flow arrangements

Conjugate heat and mass transfer in a hollow fiber membrane module for liquid desiccant air dehumidification: A free surface model approach

An analytical solution for heat mass transfer in a hollow fiber membrane based air-to-air heat mass exchanger

Conjugate Heat and Mass Transfer in a Cross-Flow Hollow Fiber Membrane Contactor for Liquid Desiccant Air Dehumidification

ADVANCED INDOOR HUMIDITY CONTROL: NEW IMPACTS ON CONJUGATED HEAT AND MASS TRANSFER

Turbulent Heat and Mass Transfer Across A Hollow Fiber Membrane Tube Bank in Liquid Desiccant Air Dehumidification

Transient Performance of Coupled Heat and Mass Transfer in Cross-Flow Hollow Fiber Membrane Module for Air Dehumidification

Heat and mass transfer in hollow fiber module for dehumification

Conjugate Heat and Mass Transfer in a Cross-Flow Hollow Fiber Membrane Bundle Used for Seawater Desalination Considering Air Side Turbulence

An analytical solution to heat and mass transfer in hollow fiber membrane contactors for liquid desiccant air dehumidification

Turbulent heat and mass transfer across a hollow fiber membrane bundle considering interactions between neighboring fibers

Laminar Flow and Conjugate Heat and Mass Transfer in A Hollow Fiber Membrane Bundle Used for Seawater Desalination

Transport Phenomena in A Cross-Flow Hollow Fibre Membrane Bundle Used for Liquid Desiccant Air Dehumidification

Flow Maldistribution and Performance Deteriorations in a Counter Flow Hollow Fiber Membrane Module for Air Humidification/dehumidification

Fluid Flow and Heat Mass Transfer in Membrane Parallel-Plates Channels Used for Liquid Desiccant Air Dehumidification

Flow behavior and mass transfer of humid air across fiber membrane bundles

Conjugate Heat and Mass Transfer in a Skewed Flow Hollow Fiber Membrane Bank Used for Liquid Desiccant Air Dehumidification

Numerical study of heat and mass transfer in an enthalpy exchanger with a hydrophobic-hydrophilic composite membrane core