THE STUDY ON TREATMENT OF PAPER-MILL MID-STAGE WASTEWATER BY HYDROLYTIC ACIDIFICATION-ACTIVATED SLUDGE PROCESS

Zhang Beiping,Li Wei,Lu Xiejuan
2008-01-01
Environmental engineering
Abstract:The hydrolytic acidification-activated sludge process was used to study pulp-mill mid-stage wastewater,which was characterized by high concentration of COD, with an emphasis on the effect and parameters of hydrolytic acidification and activated sludge process.Experimental results were shown as follows:when the temperature was under 40℃ and hydraulic retention time(HRT) was 10 h,the removal rate of COD was about 34%.The technologic parameters of the later activated sludge were: hydraulic retention time was 12 h,the DO of the mixed liquid was 4 mg/L,the removal rate of COD was about 80%.As a result,COD in the effluent could meet the emission standard specified by "Wastewater Pollictant Emission Standard of Papermaking Industry"(GB3455-2001).But when the temperature was higher than 40℃,the removal rate of COD in the mid-stage wastewater was about 55%.The effluent could not meet the emission standard.
What problem does this paper attempt to address?