Abstract:The pollutants in wastewater can be degraded effectively by heterogeneous catalytic ozonation due to the production of hydroxyl radical (•OH) with strong oxidation power. For the natures of low weight, large specific surface area, excellent physical strength and stable chemical characteristics, the porous ceramsite was chosen for catalytic ozonation of wastewater in the present study, and the practical application parameters of the system were investigated for the actual pulp and paper mill wastewater (PPMW) in the continuous-flow reactor including temperatures, feeding flow rate, O3 flow rate and O3 dosage. The optimum experimental conditions were obtained (T = 25 ℃, feeding flow rate = 0.25 L/min, O3 flow rate = 0.5 L/min, O3 dosage = 15 g/L) for the process of catalytic ozonation. The results show that the effluent concentration of COD decreases from about 200 mg/L to 10 mg/L, namely the removal efficiency is about 95 %. The stability of the catalyst over time was tested in the continuous-flow reactor for 48 days, confirming that the porous ceramsite exhibits good performance in 30 days. The reusability of the catalyst was studied after the used catalyst was washed with Milli-Q water and ethanol, exhibiting good catalytic activity of the regenerated catalyst in three cycles. The fluorescent excitation-emission matrix (EEM), UV–vis analysis and GC–MS analysis were used for analyzing the organic pollutants in raw PPMW and after treatment. These results indicate that the process of catalytic ozonation with porous ceramsite has a high treatment efficiency on PPMW, and the continuous-flow reactor can be more practically used for a full-scale community PPMW application at a mill level.

Experimental Study on the Advanced Treatment of Pulp and Paper Mill Effluents by Ozonation Process

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

ADVANCED TREATMENT TECHNOLOGIES OF PAPER MILL WASTEWATER BY OZONE-BIOLOGICAL AERATED FILTER PROCESS

Catalytic Ozonation for Pulp and Paper Mill Wastewater Treatment: COD Reduction and Organic Matter Degradation Mechanism

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

Ozonation As an Advanced Oxidant in Treatment of Bamboo Industry Wastewater.

Coagulation and ozonation treatment of biologically treated wastewater from recycled paper pulping industry: effect on the change of organic compounds

Tertiary treatment of biologically treated pulp and paper wastewater by combined coagulation-ozonation process

Experimental study on the treatment process of wastewater in a printing and dyeing industrial park

Removal of characteristic pollutants from printing and dyeing wastewater by adsorption-catalytic ozonation

Sequential Treatment by Ozonation and Biodegradation of Pulp and Paper Industry Wastewater to Eliminate Organic Contaminants

Advanced Treatment of Effluent from Dyeing Wastewater Secondary Treatment by Ozonation Process

Advanced Treatment of Bio-treated Dyeing Wastewater by Ozone Oxidation Process

Porous ceramsite catalytic ozonation for the treatment of pulp and paper mill wastewater in a continuous-flow reactor

ADVANCED TREATMENT OF BIO-TREATED EFFLUENT IN MUNICIPAL WASTEWATER TREATMENT PLANT BY OZONATION PROCESS

REMOVAL OF PARTICULAR POLLUTANTS IN PAPERMAKING WASTEWATER BY ADSORPTION-CATALYTIC OZONATION

Study on Advanced Treatment of Coking Wastewater by Fenton Oxidation Process

Application analysis of Fenton /flocculation process for advanced treatment of pulp and papermaking wastewater

Experiment study on the Fenton oxidation advanced treatment of bio-treated tannery wastewater

Operating conditions on the optimization and water quality analysis on the advanced treatment of papermaking wastewater by coagulation/Fenton process