Abstract:An experimental investigation was conducted to study the cavitating flow around cylinders with different chamfer angles vertically inserted in a circular pipe. The experiments were performed in a variable-pressure closed-loop cavitation rig at a constant Reynolds number of Re=1.2×105 with cavitation numbers corresponding from inception to supercavitation. In practical hydraulic systems, numerous structures can be modelled as vertically inserted chamfered cylinders and the cavitation phenomenon can occur around such structures with serious side effects. This work is an attempt to understand the cavity dynamics and the influence of the chamfer angle θ on the characteristics of cavitating flows, with the aim of providing guidelines for designing relevant structures. The low- and high-speed images of the cavitating flow in different cavitation regimes were analyzed to investigate the dynamics of the cavitating flow around the cylinder with chamfer angle θ=60∘. From the space–time diagram obtained from the high-speed series, it is found that for cavitation number σ>0.80, the shedding of the small vapor filaments is induced by interfacial instabilities; for cavitation number σ<0.75, the re-entrant jet accounts for the periodic shedding of the vapor clouds. In the transition region (0.75<σ<0.80), the shedding is caused by a complex combination of both mechanisms. The dominant shedding frequency, expressed as Strouhal number St, drops with the decrease of the cavitation number σ in the regime dominated by interfacial instabilities; while in re-entrant jet regime, it is almost insensitive to the change of the cavitation number σ. In addition, the influences of the chamfer angle θ on the inception condition, cavity length, pressure drop, and pressure fluctuation are also discussed in the present work. With the increase of θ, the cavitation resistance becomes better and the pressure drop through the test section decreases.

A System for Cavitation Observation and Drag Force Measurement of Round Samples

Simultaneous high-speed internal and external flow measurements for a high-pressure diesel nozzle

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

A Measurement Technique On The Hydrodynamic Force On The Free Surface-Piercing Cylinder At A Yawed Angle

Numerical Investigation of Cavitation Flow Inside Spool Valve with Large Pressure Drop

Study of the Cavitation Phenomenon Inside Roller Vane Pump

Experimental and Numerical Investigation on the Cavity Regime and Drag Reduction of Ventilated Partial Cavity

Analysis of Ventilated Cavitation Around A Cylinder Vehicle with Nature Cavitation Using A New Simulation Method

Experimental investigation of cavitating flow around chamfered cylinders vertically inserted in a circular pipe

Measurement and Prediction of Cavitating Flow-Induced Vibrations

High-speed photography and particle image velocimetry of cavitation in a Venturi tube

Cavitation Monitoring System Based on Surface of Critical Cavitation Coefficient

A Venturi Tube Design for Studying Travelling Bubble Cavitation

Unsteady Dynamics of Cloud Cavitating Flows around a Hydrofoil

A Friction Drag Testing System for the Underwater Axi-symmetrical Vehicle Model

Study of Drag Forces on a Designed Surface in Bubbly Water Lubrication Using Electrolysis

Numerical Study on the Vertical Water Exit of A Cylinder with Cavity

Numerical Study on Drag Reduction of Superhydrophobic Surfaces with Conical Microstructures in Laminar Flow

A new cavitation model based on evaporation and condensation theory

Numerical Simulation of Dynamic Characteristics of Hydrofoil Structure under Cavitation Conditions

Non-Equilibrium Molecular Dynamics Simulation for Mechanism and Drag Reduction of Underwater Supercavitation in Open System