Abstract:Lidar has been widely used in many fields due to its high precision. The system must also have a corresponding large field of view receiving capability in order to achieve effective detection of targets when imaging lidar realizes large-angle scanning. For the InGaAs-APD detector component, there is a contradiction between the high-frequency response bandwidth and the size of the photosensitive surface. This paper proposes a large surface four-quadrant InGaAs-APD detector with 2 x 2 area array structure design, which based on a small photosensitive panel detector with a unit diameter of 0.5 mm. On the basis of ensuring the cut-off frequency bandwidth of 100 MHz, it also realizes signal reception with large field of view and high sensitivity. For the receiving lens of the system, the relationship between the bin size of the detector and the receiving field of view in the non-imaging optical receiving system is studied. Under the condition that the parameters such as the size of the detector facet have been determined, the best position of the detector is optimally designed to maximize the receiving field of view. Based on theoretical foundations such as radiation angle coefficient and etendue, the non-imaging optical system lidar distance equation is established to evaluate the light-gathering ability of receiving lenses with different effective apertures and focal lengths, and to optimize optical structural parameters such as the best effective aperture and focal length of the receiving lens. Finally, the aspheric lens with the best parameters is selected as the basic receiving optical lens of the system, and an array type large field of view direct detection technology is proposed. The receiving optical system is composed of 6 aspheric single lenses, and the structure is in the form of 2 x 3 array, which finally realizes the efficient detection of echo signals with a large field of view of 48 degrees x 26 degrees.

Design and Implementation for Next Generation Ladar

A ladar design and implement with a small size and real-time imaging

Optimization of System Design and Calibration Algorithm for SPAD-Based LiDAR Imager

Research on Key Technologies of MEMS-based 3D Imaging LIDAR Vision System

Design Study of a Large-Angle Optical Scanning System for MEMS LIDAR

Design and Realization of Wide Field-of-View 3D MEMS LiDAR

Design on Omnidirectional Optical System of Lidar Based on 2D MEMS Mirror

Design of Three-Dimensional Imaging Lidar Optical System for Large Field of View Scanning

Design of Lidar Receiving Optical System with Large FoV and High Concentration of Light to Resist Background Light Interference

Long-range High-Speed Laser Imaging Based on VCSEL Array and MPPC Array.

Optical Design of a New Folding Scanning System in MEMS-based Lidar

Design and Experiment of Space Borne Synthetic Aperture Ladar for Non-Cooperative Targets Imaging System

Wide angle LiDAR demonstrator based on a resonantly operated 1D MEMS mirror capable of scanning 180°

A Novel 3-D Imaging Configuration Exploiting Synthetic Aperture Ladar

Design of Non-Imaging Receiving System for Large Field of View Lidar

Pixel Multiplexing Technique For Real-Time Three-Dimensional-Imaging Laser Detection And Ranging System Using Four Linear-Mode Avalanche Photodiodes

Low-voltage Wide-Field-of-view Lidar Scanning System Based on a MEMS Mirror.

A large-scale microelectromechanical-systems-based silicon photonics LiDAR

MEMS mirror based omnidirectional scanning for lidar optical systems

Scannerless Gain-Modulated Three-Dimensional Laser Imaging Radar

Towards a MEMS-based Adaptive LIDAR