Design of Lidar Receiving Optical System with Large FoV and High Concentration of Light to Resist Background Light Interference

Qingyan Li,Shuo Wang,Jiajie Wu,Feiyue Chen,Han Gao,Hai Gong
DOI: https://doi.org/10.3390/mi15060712
IF: 3.4
2024-05-29
Micromachines
Abstract:Lidar has the advantages of high accuracy, high resolution, and is not affected by sunlight. It has been widely used in many fields, such as autonomous driving, remote sensing detection, and intelligent robots. However, the current lidar detection system belongs to weak signal detection and generally uses avalanche photoelectric detector units as detectors. Limited by the current technology, the photosensitive surface is small, the receiving field of view is limited, and it is easy to cause false alarms due to background light. This paper proposes a method based on a combination of image-side telecentric lenses, microlens arrays, and interference filters. The small-area element detector achieves the high-concentration reception of echo beams in a large field of view while overcoming the interference of ambient background light. The image-side telecentric lens realizes that the center lines of the echo beams at different angles are parallel to the central axis, and the focus points converge on the same focal plane. The microlens array collimates the converged light beams one by one into parallel light beams. Finally, a high-quality aspherical focusing lens is used to focus the light on the small-area element detector to achieve high-concentration light reception over a large field of view. The system achieves a receiving field of view greater than 40° for a photosensitive surface detector with a diameter of 75 μm and is resistant to background light interference.
nanoscience & nanotechnology,instruments & instrumentation,physics, applied,chemistry, analytical
What problem does this paper attempt to address?
The main problems that this paper attempts to solve are the background light interference problems existing in the existing LiDAR (Light Detection and Ranging) systems when receiving echo signals, and how to achieve high - concentration light reception in a large field - of - view (FoV) when using small - area element detectors. Specifically, the paper proposes a method that combines an image - side telecentric lens, a microlens array and an interference filter to overcome background light interference and achieve efficient and concentrated reception of echo beams within a large field - of - view. ### Background and Problems 1. **Background Light Interference** - LiDAR systems are usually weak - signal detection systems, using avalanche photodetector units as detectors. Due to technological limitations, the photosensitive surface of the detector is small, the receiving field - of - view is limited, and false alarm signals are easily generated due to background light. - Background light noise mainly comes from natural radiation (such as solar reflection), the thermal radiation of the target itself, the scattering of atmospheric molecules, etc. These noises will seriously affect the detection of long - distance weak echo signals. 2. **Limitations of Small - Area Element Detectors** - The photosensitive surface of the small - area element detector is small, resulting in a limited receiving field - of - view and difficulty in achieving efficient light reception in a large field - of - view. - Traditional solutions such as adding field lenses, light cones or immersion lenses can appropriately increase the receiving field - of - view, but the effect is limited and cannot meet the actual application requirements. ### Solutions The paper proposes a method that combines an image - side telecentric lens, a microlens array and an interference filter: 1. **Image - side Telecentric Lens** - Make the center lines of echo beams at different angles parallel to the central axis, and the foci converge on the same focal plane. - This helps to eliminate the influence of different incident angles on the interference filter, thereby overcoming background light interference. 2. **Microlens Array** - Collimate the converged beams one by one into parallel beams to further improve the concentration of the beams. 3. **High - Quality Aspheric Focusing Lens** - Focus the beams onto the small - area element detector to achieve efficient light reception within a large field - of - view. ### Performance Indicators - **Receiving Field - of - View**: Greater than 40° - **Diameter of Photosensitive Surface**: 75 μm - **Ability to Resist Background Light Interference**: Through the above design, the system can effectively resist background light interference. ### Conclusion This design solves the problems of limited receiving field - of - view, serious background light interference and low receiving efficiency in existing LiDAR systems, and improves the performance and practicality of LiDAR systems. This method has broad application prospects in fields such as autonomous driving, remote sensing detection and intelligent robots.