Abstract:In order to study the numerical variation law of the internal ballistic overload of the guided projectile under different coated mixed charge structures, and to provide a basis for the development of a new type of high muzzle velocity and low overload propellant charge design, taking a large-caliber suppressed artillery as the simulation object, the layered combustion model of the coated propellant was established by using the one-dimensional two-phase flow theory, and the lace 37-hole nitroguanidine propellant was used as the main charge (MC) and lace 19-hole nitroguanidine coated propellant as auxiliary charge (B). The effects of mixed charges with different charge mass, different mixing ratios and different coating layer thicknesses on the internal ballistic overload value were studied by simulation calculation. The research results show that the increase of the total charge mass will increase the overload impact of the guided projectile and the muzzle velocity of the projectile ; with the increase of the thickness of the coating layer and the proportion of the coated propellant in the mixed charge ratios, the longitudinal overload and the muzzle velocity of the projectile in the chamber of the guided projectile will be decreased to a certain extent and the time point when the maximum overload occurs will be delayed; under the structure of the coated mixed charge, the influence of the proportion of coated propellant in different mixed charge ratios and the coating layer thickness of coated propellant on the launch overload of the guided projectile is greater than the muzzle velocity of the projectile, and the effect of reducing the firing overload in the chamber by increasing the proportion of coated propellant in different mixed charge ratios is the most significant.

Numerical Simulation of Interior Ballistic Process of Super-high Firing-rate Weapon With Whole Mount Ammunition

Simulation of ballistic performance of a two-layered structure of nanostructured metal and ceramic

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

Super-High Initial Velocity Mechanism of Bullet Propulsion with Adaptive Pressure-Maintaining Chamber

Numerical simulation of the disk fragment impacting resistance of plate target

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

Numerical simulation of ballistic performance of bimodal nanostructured metals

Numerical Simulation of Bullet Accelerating Process at After-effect Period

Interior Ballistic Characteristics of Electromagnetic Rail Launcher Under Continuous Firing

3 Dimensional Finite Element Simulation on Perforating Casing of Peroration Bullet

Simulation of interior ballistic two-phase flow of storage propellant charge

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Finite Element Simulation and Experimental Comparison on Perforating Casing of Peroration Bullet

Numerical simulation and optimized design of a launching system with a novel charge structure

Numeric Simulation Analysis of Projectile Supplement Mechanism of Artillery

The Interior Ballistic Model of the Mortar-howitzer with Improved Gas Flow Calculation Method

Numerical simulation research of inner ballistic overload of guided projectile based on coated mixed charge

Numerical simulation of the extruded process of Cased Telescoped Ammunition

Modeling and Simulation of Aerial Dispersion on Piston Dispersal Mechanism

Modeling and Simulation on Launch of New Type Artillery

Numerical Simulation of Conical Shaped Charge Jet Formation Process