Treatment and Reuse of Wastewater in Synthetic Rubber Production by a Full Scale MBR-UF-RO System

Yan ZHANG,Wei ZHENG,Rui LIU,Wei LI,Min-jie MA,Ying LI,Lü-jun CHEN
DOI: https://doi.org/10.3969/j.issn.1674-991X.2012.01.002
2012-01-01
Abstract:The wastewater produced from a rubber synthesis plant was treated by an advanced process of membrane bioreactor-ultra filtration-reverse osmosis(MBR-UF-RO) for reuse.1 181 m3/d of the production wastewater flowed in the MBR with influent CODCr in the range of 158-451 mg/L(258 mg/L in average).The hydraulic retention time(HRT) of the MBR was 5 h.The MBR effluent,with CODCr in the range of 5-101 mg/L(31 mg/L in average) and turbidity less than 0.2 NTU,could meet the influent requirements of UF.On-line chemical cleaning was carried out with alternation of high and low reagent concentration every 15 d,which effectively controlled the membrane fouling.The MBR effluent was mixed with 430 m3/d of circulating cooling wastewater,and further treated by the UF and RO.The conductivity of the RO effluent was steadily 30-45 μS/cm,which was qualified to be reused as circulating cooling water.The reuse rate of total wastewater treated was 62.8% within the plant,and the operation cost of the advanced treatment was 4.34 RMB/m3.
What problem does this paper attempt to address?