Abstract:In this study, red mud was used as the main raw material to prepare polyaluminum-ferric chloride (PCFA) with high added value. The effects of the liquid–solid ratio, reaction temperature, reaction time, hydrochloric acid concentration during acid leaching, polymerization time, OH − /Fe molar ratio, and polymerization temperature on the preparation of PCFA were investigated and determined by conducting single-factor optimization experiments under optimal preparation conditions. Characterization results show that the surface of the PCFA flocculant has compact and dense porosity and a dense sheet-like structure, and PCFA contains hydroxyl-bridged iron–aluminum polymers. When the settling time was 30 min, the stirring intensity was 200 rpm; the initial concentration of Nano-titanium dioxide(TiO 2 -NPs) was 30 mg·L −1 ; the pH value was 7.0; the dosage of PCFA was 25 mg·L −1 , and the optimum removal rates of TiO 2 -NPs and turbidity were 84.8% and 81.3%, respectively. The flocs produced by PCFA treatment of TiO 2 -NPs were large and dense. Under optimal flocculation conditions, the average particle size of PCFA-TiO 2 -NP flocs was 2.98 μm, and the fractal dimension was 1.66. Based on the abovementioned flocculation experimental data, a Grey correlation method was established to evaluate the degree of correlation among factors such as ionic strength, settling time, stirring strength, kaolin concentration, initial concentration, reaction pH value, and dosage and the performance of PCFA coagulation to remove TiO 2 -NP-containing wastewater. In the reaction system of the PCFA coagulation of TiO 2 -NPs, the dosage is the most important factor.

On Novel Synthetic Method and Performance of Polymeric Phosphate-aluminum Chloride(PPAC)

Humic acid removal from water with polyaluminum coagulants: Effect of sulfate on aluminum polymerization

Preparation and coagulation-flocculation performance of covalently bound organic hybrid coagulant with excellent stability

A novel preparation method of polyaluminum chloride/polyacrylamide composite coagulant: Composition and characteristic

Preparation of Coagulant from Red Mud and Semi-Product of Polyaluminum Chloride for Removal of Phosphate from Water

Research and Application of Gangue for the Preparation of Polymerized Aluminum Magnesium Chloride Flocculant

Development of a Polyaluminum Ferric Titanium Chloride for Phosphorous Removal in Water

Improvement of alum and PACl coagulation by polyacrylamides (PAMs) for the treatment of pulp and paper mill wastewater

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Study on the optimization of polyacrylamide wastewater treatment by coagulation-adsorption

Chemical characteristics of aluminum aqueous solution and the formation mechanism of aluminum polymer

Preparation and Coagulation Performance of Polyaluminum Lanthanum Silicate Coagulant

Experimental Study on Application of PAC Produced Electrochemically in Water and Wastewater Treatment

[Coagulation performance and mechanism of Alb species in polyaluminum chloride in removing humic acid].

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Composite Flocculants Prepared by Waste Aluminum

Preparation and Characteristics of Polyaluminium Chloride by Utilizing Fluorine-Containing Waste Acidic Mother Liquid from Clay-Brine Synthetic Cryolite Process

A Comparison of Polymeric Aluminum Chloride and a New Coagulant Containing Oxidants and Humic Acid for Municipal Wastewater Treatment

Efficiency of coagulation aids in the wastewater with low temperature,low turbidity,and low alkaline