Abstract:High-pressure direct injection diesel/methanol dual-fuel engines exhibit excellent emission reduction potential, but they are still in the initial stage of research and development. The influences of different methanol injection locations, injection duration, and injection pressures on combustion characteristics, mixture homogeneity, and exhaust emissions are investigated to explore appropriate injection strategies and further optimize the engine performance base using CONVERGE software. The results show that the impact of the methanol injection position on the engine is relatively small, especially on combustion characteristics. A larger axial nozzle distance contributes to the formation of the homogeneous mixture, improving the engine economy. However, the engine performance is remarkably affected by methanol injection duration and methanol injection pressure. A shorter combustion duration is achieved with a decrease in the methanol injection duration and an increase in the methanol injection pressure, as a result of which the fuel economy is improved, with the combustion process more concentrated near the top dead center. Simultaneously, the mixture homogeneity is enhanced, which is conducive to a reduction in soot and CO emissions, yet not to a NOX and HC reduction. The lowest overall emissions of NOX, soot, CO, and HC are achieved when the radial nozzle distance and axial nozzle distance are 2.5 mm and 0.5 mm, respectively. Besides, the combustion characteristics and emissions of the engine are affected significantly under different methanol injection locations and injection pressures. The increased injection interval leads to deteriorating combustion characteristics and economy, i.e., a delayed combustion phase (CA50), an extended ignition delay and combustion duration (CA10–CA90), thereby increasing CO and soot emissions, but decreasing NOX emission. Additionally, the optimal economy and exhaust emissions are obtained when adopting an injection duration of 6 °CA and an injection pressure of 44.4 MPa. The ITE is increased in this case compared to the other injection strategies, thereby improving the engine performance significantly. The results provide parametric feedback and theoretical support for the design of high-pressure direct injection diesel/methanol dual-fuel engines from a time and space perspective, which has certain theoretical significance.

Influence of Methanol Injection at Intake Port on Turbocharged and Intercooled Diesel Engine

Effects of Methanol Injection at Intake Port on Diesel Engine

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emission Characteristics of a DI Diesel Engine Fueled by Diesel-Methanol Blends

Effect of Turbocharged Diesel Engine Operating Conditions on Intake Premixed Methanol Quantity and Performance

Investigation on the Effect of Port-Injected Methanol on the Performance and Emissions of a Diesel Engine at Different Engine Speeds

The Influence of Methanol and Diesel Blends on Combustion and Emission Characteristics in Turbocharged Diesel Engine

Study of Methanol Injection at Intake Port to Suppress Smoke from Diesel Engine under Accelerating Operations

Study on Combustion Characteristics of a DI Diesel Engine Operating on Diesel/Methanol Blends

Combustion and Emission Characteristics of a DI Engine Operating on High Proportion of Methanol-Diesel Dual Fuel

Assessment of the Effects of Intake Temperature and Injector Structure on the Combustion Characteristics of Direct‐Injection Spark‐Ignition Methanol Engines

Parametric Study on Effects of Methanol Injection Timing and Methanol Substitution Percentage on Combustion and Emissions of Methanol/diesel Dual-Fuel Direct Injection Engine at Full Load

Combustion and Emission Characteristics of a Turbocharged Diesel Engine Using High Premixed Ratio of Methanol and Diesel Fuel

Effects of Diesel/Methanol Compound Combustion on Emissions of Turbocharged Diesel Engine

Effects of Different Mixture Ratios of Methanol-Diesel on the Performance Enhancement and Emission Reduction for a Diesel Engine

Effects of Methanol to Diesel Ratio and Diesel Injection Timing on Combustion, Performance and Emissions of a Methanol Port Premixed Diesel Engine

Study on the Methanol Percentages Effect on Combustion and Emission of DME/Diesel Blended Fuel

Influence of Methanol Injection Styles on the Performance of the Compound Combustion in a Diesel Engine

Experimental Study on Thermo-Atmosphere Combustion of Direct-Injection Methanol Engine

Numerical Investigation on the Influence of Injection Location and Injection Strategy on a High-Pressure Direct Injection Diesel/Methanol Dual-Fuel Engine

In-depth Comparison of Methanol Port and Direct Injection Strategies in a Methanol/diesel Dual Fuel Engine