Abstract:Tungsten (W) is considered as promising candidate material for plasma facing components (PFCs) in future fusion reactors attributing to its many excellent properties. Current commercial pure tungsten material in accordance with the ITER specification can well fulfil the performance requirements, however, it has defects such as coarse grains, high ductile–brittle transition temperature (DBTT) and relatively low recrystallization temperature compared with its using temperature, which cannot meet the harsh wall loading requirement of future fusion reactor. Grain refinement has been reported to be effective in improving the thermophysical and mechanical properties of W. In this work, rare earth oxide (Y2O3/La2O3) and carbides (TiC/ZrC) were used as dispersion phases to refine W grains, and micro/nano composite technology with a process of “sol gel – heterogeneous precipitation – spray drying – hydrogen reduction – ordinary consolidation sintering” was invented to introduce these second-phase particles uniformly dispersed into W grains and grain-boundaries. Via this technology, fine-grain W materials with near-full density and relatively high mechanical properties compared with traditional pure W material were manufactured. Preliminary transient high-heat flux tests were performed to evaluate the thermal response under plasma disruption conditions, and the results show that the W materials prepared by micro/nano composite technology can endure high-heat flux of 200MW/m2 (5ms).

Selection of candidate doped graphite materials as plasma facing components for HT-7U device

Surface Diversifying and Deuterium Retention Characteristics of Doped Graphite with SiC Coating Exposed to Plasma Discharges in EAST Tokamak

Development of New Multi-elements Doped Carbon-base Plasma Facing Materials

Application researches on doped graphites as plasma facing materials

Thermal Shock Behavior of Doped Graphites Tested by High Energy Laser Beam and Electron Beam

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

IRRADIATION EXPERIMENTS OF PLASMA FACING MATERIALS DEVELOPED FOR HT-7U IN THE HT-7 TOKAMAK

The Primary Results For The Mixed Carbon Material Used For High Flux Steady-State Tokamak Operation In China

Behavior of Thick SiC Gradient Coatings on Graphite under High Heat Flux and HT-7 Limiter Plasma Irradiation

Research on Sic/C Plasma-Facing Functionally Graded Materials (fgm) in China

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Optimization of Residual Thermal Stress in SiC/C Plasma Facing Material for Future Tokamak Facilities of China

High Heat Flux Test Of Sic Coated Doped Graphite

Processing and characterization of B4C/Cu graded composite as plasma facing component for fusion reactors

Fabrication and Plasma Exposure of Fine-Grained Tungsten/Copper Functionally Graded Materials in the HT-7 Tokamak

PSI issues toward steady state plasmas in the HT-7 tokamak

Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor

Micro/Nano Composited Tungsten Material and Its High Thermal Loading Behavior

New Progress of Ceramic-Based Functionally Graded Plasma-Facing Materials in China

Deuterium Retention in SiC Coated Graphite by D2+ Implantation

The Development of Joining Doped Graphite to Copper for First Wall Application in HT-7 Tokamak