Abstract:TiO2-diatomite photocatalysts were prepared by sol-gel process with various pre-modified diatomite. In order to obtain diatomite with different surface characteristics, two modification approaches including calcination and phosphoric acid treatment on the micro-structure of diatomite are introduced. The photocatalysts were characterized by XRD, XPS, nitrogen adsorption-desorption isotherms and micromorphology analysis. The results indicate that, compared with pure TiO2, the anatase-to-rutile phase transition temperature of TiO2 loaded on diatomite carrier is significantly increased to nearly 900 degrees C, depending on the different pretreatment method of diatomite. The photocatalytic activities of different samples were evaluated by their degradation rate of methyl orange ( MO) dye under UV and visible-light irradiation. The samples prepared by phosphoric acid pretreatment method exhibit the highest photocatalytic activity. After 90 min of UV irradiation, about 90% of MO is decomposed by the best effective photocatalyst. And after 8 h visible-light irradiation, nearly 60% of MO is decomposed by the same sample. Further mechanism investigation reveals that the H3PO4 pretreatment process can obviously change the surface features of diatomite carrier, cause the formation of Si-O-Ti bond, increase the binding strength between TiO2 and diatomite, restrain crystal growth of loaded TiO2, and thus form thermal-stable meso-porous structure at the granular spaces. It helps to build micro-, meso- and macro-porous hierarchical porous structure in TiO2-diatomite, and improves the charge and mass transfer efficiency during catalyzing process, resulting in the significantly increased photocatalytic activity of TiO2-diatomite pretreated by phosphoric acid. (C) 2014 Elsevier B. V. All rights reserved.

Effect of Natural Zeolite Supports for Photoactive TiO2 During the Photodegradation Process

Photodegradation of an Azo Dye Using Immobilized Nanoparticles of TiO2 Supported by Natural Porous Mineral.

Preparation of TiO_2/SiO_2 and Photo-Catalytic Degradation of Methyl-Orange

Exploration of the active species in the photocatalytic degradation of methyl orange under UV light irradiation

Interface Actions Between TiO2 and Porous Diatomite on the Structure and Photocatalytic Activity of TiO2-diatomite

A high-stability silica-clay composite: synthesis, characterization and combination with TiO2 as a novel photocatalyst for Azo dye.

TiO2 Nanoparticles Supported on PMMA Nanofibers for Photocatalytic Degradation of Methyl Orange

Photoactivity of Titanium Dioxide Supported on MCM41, Zeolite X, and Zeolite Y

Enhanced Photoactivity of a Titanium(IV) Oxide Supported on ZSM5 and Zeolite A at Low Coverage

Mechanistic insights into the selective photocatalytic degradation of dyes over TiO2/ZSM-11

Influence of Pd, Pt and Au nanoparticles in the photocatalytic performance of N-TiO2 support under visible light

Preparation, characterization and photocatalytic activity of silver-modified TiO2/zeolite catalysts

Photocatalytic degradation of methyl orange in aqueous suspension of mesoporous titania nanoparticles

Specific Analyses of the Active Species on Zn0.28Cd0.72S and TiO2 Photocatalysts in the Degradation of Methyl Orange

Adsorption and Photocatalytic Degradation of Methyl Orange on TiO2 and CuZSM-5 Mixture

Enhanced photocatalytic performance of sensitized mesoporous TiO2 nanoparticles by carbon mesostructures

Photoelectrocatalytic Processes of TiO2 Film: The Dominating Factors for the Degradation of Methyl Orange and the Understanding of Mechanism

Fabrication of ZSM-5 Zeolite Supported TiO2-NiO Heterojunction Photocatalyst and Research on Its Photocatalytic Performance

Notice of RetractionPhotocatalytic Properties of Titanium Dioxide Loaded on ZSM-5 Zeolites Modified by NaOH and NH4Cl

Enhanced Photocatalytic Degradation of Methyl Orange by Metal‐Tio2 Nanoparticles

Effects of SiO2/Al2O3 ratio of ZSM-5 zeolite on photocatalytic performance of TiO2/ZSM-5