Synthesis of Nanocrystalline CuMS2 (M = in or Ga) Through a Solvothermal Process

QY Lu,JQ Hu,KB Tang,YT Qian,GE Zhou,XM Liu

DOI: https://doi.org/10.1021/ic9911365

IF: 4.6

2000-01-01

Inorganic Chemistry

Abstract:Nanocrystalline CuMS2 (M = In or Ga) were synthesized at 200 degrees C under solvothermal conditions using CuCl, In or Ga, and S as reactants.3CuCl + 4M + 6S --> 3CuMS(2) + MCl3 (M = In or Ga).

What problem does this paper attempt to address?

ChemInform Abstract: Synthesis of Nanocrystalline CuMS2 (M: in or Ga) Through a Solvothermal Process.

Qingyi Lu,Junqing Hu,Kaibin Tang,Yitai Qian,Guien Zhou,Xianming Liu

DOI: https://doi.org/10.1002/chin.200025027

2000-01-01

ChemInform

Abstract:AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.
Solvothermal Reaction Route to Nanocrystalline Semiconductors AgMS2 (m=ga, In)

Junqing Hu,Qingyi Lu,Kaibin Tang,Yitai Qian,Guien Zhou,Xianming Liu

DOI: https://doi.org/10.1039/a902218j

IF: 4.9

1999-01-01

Chemical Communications

Abstract:Nanocrystalline semiconductors AgGaS2 and AgInS2 with particle sizes ranging from 5 to 12 nm are prepared by a solvothermal reaction in the temperature range 180–230 °C.
ChemInform Abstract: Solvothermal Reaction Route to Nanocrystalline Semiconductors AgMS2 (M: Ga, In).

Junqing Hu,Qingyi Lu,Kaibin Tang,Yitai Qian,Guien Zhou,Xianming Liu

DOI: https://doi.org/10.1002/chin.199934020

1999-01-01

ChemInform

Abstract:AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.
Polyol Mediated Solvothermal Synthesis and Characterization of CuIn(1−x)GaxS2 Nanocrystals

Mohamed Benchikhi,Rachida El Ouatib,Lahcen Er-Rakho,Bernard Durand

DOI: https://doi.org/10.1007/s10904-016-0423-6

IF: 3.518

2016-07-30

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:Gallium-substituted copper indium sulfide (CuIn(1−x)GaxS2) nanoparticles have been synthesized by a convenient solvothermal method without usage of surfactants or toxic reductants such as hydrazine. Thiourea, sodium hydroxide, CuCl2·2H2O, InCl3 and GaCl3 were used as starting materials and ethylene glycol as solvent and reducing agent. The reactions were performed at 200 °C for 16 h. Effect of sodium hydroxide on the reaction products is analyzed. The powders are mainly characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy, BET surface area measurements and UV–Vis absorption spectroscopy. The results show that the gallium is successfully incorporated into the chalcopyrite crystal structure. The homogeneous powders obtained are constituted of nanoparticles with sizes in the range 20–30 nm and exhibit a specific surface area close to 65 m2/g. Further, the possible mechanism for the formation of CuIn(1−x)GaxS2 nanocrystals is explained. The optical band gap energies of the nanoparticles were in the range 1.48–1.75 eV.

polymer science
Synthesis, Characterization, and Properties of Nanocrystalline Cu2sns3

B Li,Y Xie,JX Huang,YT Qian

DOI: https://doi.org/10.1006/jssc.2000.8772

IF: 3.3

2000-01-01

Journal of Solid State Chemistry

Abstract:The preparation of nanocrystalline Cu2SnS3 at synthetic conditions of low temperature (<180°C) was first reported. Nanocrystalline Cu2SnS3 was directly synthesized from the reaction of CuCl2·2H2O with elemental tin and sulfur through a solvothermal process in ethylenediamine at 140–180°C for 15 h. X-ray diffraction (XRD) patterns, transmission electron microscope (TEM) images, and X-ray photoelectron spectra (XPS) were used to characterize the products. The mechanism of the formation of the Cu2SnS3 nanocrystals in the solvothermal process was proposed. The UV–vis absorption spectroscopy and the electric conductivity of products were also studied.
A general synthesis of Cu-In-S based multicomponent solid-solution nanocrystals with tunable band gap, size, and structure

Xiaolei Wang,Daocheng Pan,Ding Weng,Chen Yian Low,Lynn Rice,Jinyu Han,Yunfeng Lu

DOI: https://doi.org/10.1021/jp103572g

2010-01-01

Abstract:A general approach has been developed to synthesize high-quality Cu-In-S based multicomponent solid-solution nanocrystals (NCs) of Zn-2x(Culn)(1-x)S-2, (Culn)(1-x)Cd2xS2, and (ZnS)(x)(CuInS2)(CdS)(z) at relatively low temperature. This was achieved in a noncoordinating solvent system (toluene) by a simple solvothermal process using metal diethyldithiocarbamate complexes as the precursors. The composition, crystalline structure, size, and bang gap of the NCs could be readily tuned by the precursors used and synthesis conditions. This work provides useful understanding for the synthesis of solid-solution NCs that are of interest for photocatalyst, solar cell, and other applications.
Colloidal synthesis of monodisperse quaternary CuInSSe nanocrystals

Yu Zou,Dongsheng Li,Deren Yang

DOI: https://doi.org/10.1016/j.matchemphys.2011.12.026

IF: 4.778

2012-01-01

Materials Chemistry and Physics

Abstract:Quaternary CuInSSe nanocrystals have been synthesized by a colloidal route using commercially available materials. Oleylamine is used as the solvent and capping agent. It is proved that the nanocrystals are alloyed nanocrystals rather than a mixture of CuInS2 and CuInSe2 nanocystals. Furthermore, their formation is regarded to involve the nucleation of CuS and the subsequent reaction between CuS nuclei and remaining precursors. It is also found that the composition and structure of the nanocrystals can be influenced significantly by the reaction temperatures and time. © 2011 Elsevier B.V. All rights reserved.
Synthesis and Morphological Evolution of CuGaS2 Nanostructures Via a Polyol Method

Qiang-chun Liu,Kai-bin Tang

DOI: https://doi.org/10.1360/cjcp2006.19(4).335.6

2006-01-01

Abstract:Using ethylene glycol as solvent and reductant, CuCl22H2O, (NH2)2CS and self-prepared GaCl3 as the starting materials, CuGaS2 nanostrucutures were synthesized on a large scale at 220 C. Powder X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscope, high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy were used to characterize the products. It demonstrated the evolution of the CuGaS2 particles from spherical assemblies to flowerlike morphology, over time, at 220 C. Simultaneously, we elucidated the specific roles of reaction temperature, reaction time and solvent in the formation of the final CuGaS2 nanostructures. A possible formation mechanism of CuGaS2 nanostructures was also discussed. The room temperature photoluminescence spectrum showed blue-shift and an increase of intensity, with a decrease in the sizes of CuGaS2 particles.
Hydrothermal synthesis and characterization of CuIn2.0Se3.5 nanocrystallites

Ying Jin,Changhua An,Kaibin Tang,Liying Huang,Guozheng Shen

DOI: https://doi.org/10.1016/S0167-577X(03)00301-X

IF: 3

2003-01-01

Materials Letters

Abstract:Nanocrystalline CuIn2.0Se3.5 was successfully synthesized via a convenient hydrothermal route at relatively low temperature. By changing the selenium sources, the shape of the products can be effectively controlled. The as-prepared products were characterized by X-ray powder diffraction (XRD), transmission electron microscope (TEM) and Raman spectrum. X-ray photoelectron spectroscopy (XPS) analysis proved the product was ternary compound without secondary phase in it. The factors influencing the formation of the CuIn2.0Se3.5 were investigated.
Solvothermal Synthesis of Copper Indium Gallium Selenide Powder

CAO Huiqun,ZHANG Yiqian,FAN Xianping,ZHANG Xinpeng,HU Juguang,LUO Zhongkuan,LIU Jianhong

DOI: https://doi.org/10.14062/j.issn.0454-5648.2011.07.010

2011-01-01

Abstract:The Cu InxGa1-xSe2(CIGS) powder was synthesized by a solvothermal synthesis method.The single phase CIGS were obtained at 230 ℃.The as-synthesised powder was characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and inductive coupled plasma emission spectrometer(ICP).The SEM results show that the reactive temperature has a slight effect on the size of crystal,however,the reactive time has an obvious effect on the size of crystal.The flake crystal with the size of 100-500 nm was formed at 230 ℃.The ICP results indicate that the composing of the flake crystal is Cu In0.38 Ga0.71Se1.82.
Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Zhongping Liu,Linlin Wang,Qiaoyan Hao,Dake Wang,Kaibin Tang,Ming Zuo,Qing Yang

DOI: https://doi.org/10.1039/c3ce40631h

IF: 3.756

2013-01-01

CrystEngComm

Abstract:CuInS2 nanocrystals were synthesized by one-pot thermolysis of a mixture solution of metal chlorides, 1-dodecanethiol (DT) and oleic acid in noncoordinating solvent 1-octadecene. Interestingly, in this synthesis, different structures and shapes were obtained by simply varying the dosage of DT. At a low dosage of DT, wurtzite nanoplates formed in the initial reaction stage and then they further grew to nanoplates with wurtzite-zincblende polytypism as the reaction proceeded. On the contrary, a high dosage of DT produced zincblende nanoparticles. The formation processes of nanoplates and nanoparticles were studied and a growth mechanism was proposed. Our research will aid in solution-synthesis of ternary chalcogenide nanocrystals and the development of their optoelectronic devices.
Selected Synthesis of CuS Nanotubes and Hollow Nanospheres at Room Temperature.

Xiaoyan Liu,Guangcheng Xi,Yankuan Liu,Shenglin Xiong,Lanlan Chai,Yitai Qian

DOI: https://doi.org/10.1166/jnn.2007.899

2007-01-01

Journal of Nanoscience and Nanotechnology

Abstract:A solution route has been developed to synthesize covellite (CuS) nanostructures through the precitation reaction of CuCl2 · 2H2O, thiourea (Tu), and NaHCO3 in distilled water at room temperature. By regulating the concentration of Tu, CuS nanotubes and hollow nanospheres with diameters of 100–200 nm have been selectively prepared. Structural characterizations indicate that both nanotubes and hollow spheres are composed of CuS nanoparticles with diameters of about 5–10 nm. UV-Vis absorption and room temperature photoluminescence (PL) spectra display different morphology-related absorption phenomena for nanotubes and hollow nanospheres. A systematic investigation has been carried out to understand the factors influencing the CuS morphology. Two different routes are identified to explain the formation of the nanotubes and hollow nanospheres herein.
A Novel One-Step Solvothermal Route to Nanocrystalline CuSbS2 and Ag3SbS3

Hl Su,Y Xie,Sk Wan,B Li,Yt Qian

DOI: https://doi.org/10.1016/s0167-2738(99)00094-6

IF: 3.699

1999-01-01

Solid State Ionics

Abstract:A novel solvothermal method has been successfully developed to prepare nanocrystalline CuSbS2 and Ag3SbS3 by the reactions between CuI and AgNO3 with SbCl3 and elemental sulfur in ethylenediamine at 140°C for 12 h, respectively. XRD, TEM and XPS examinations investigated the phase, grain size, morphology and purity of the products, respectively. Ethylenediamine played important roles in the formation of the ternary sulfides. A possible mechanism is proposed and expected to explain similar reactions.
Solvothermal Synthesis of Cu2ZnSnS4 Nanocrystals by Using Metal Oxides

Xiaoli Peng,Wenbin Guo,Shu Zhang,Yong Xiang

DOI: https://doi.org/10.1109/isne.2014.6839335

2014-01-01

Abstract:In this study, Cu2ZnSnS4 (CZTS) has been fabricated via a low toxicity solvothermal process. Using Cu2O, ZnO, SnO, carbon disulfide and 1-butylamine as starting materials, single-phase CZTS nanoparticles are obtained through a solvothermal reaction at 200 °C for 24 h, and the Cu:Zn:Sn ratio in the as-synthesized CZTS was close to the expected stoichiometric ratio 2:1:1. We also investigated the structure and morphology properties of the as-synthesized CZTS nanoparticles through Xray diffraction and scanning electron microscope.
A Solvothermal Route to Nanocrystalline Cu7Te4 at Low Temperature

B. Li,Y. Xie,J.X. Huang,H.L. Su,Y.T. Qian

DOI: https://doi.org/10.1006/jssc.1999.8303

IF: 3.3

1999-01-01

Journal of Solid State Chemistry

Abstract:Nanocrystalline Cu7Te4 was directly synthesized by the reaction of CuCl2·2H2O and tellurium in an autoclave with ethylenediamine as solvent at 160°C for 10 h. X-ray powder diffraction patterns, X-ray photoelectron spectra, and transmission electron microscope images show that the products are hexagonal Cu7Te4 phase and well crystallized with an average size of about 15 nm. The solvent ethylenediamine played an important role in the synthesis of nanocrystalline Cu7Te4. The reaction mechanism was proposed.
Formation of Cu2−xSe(en)2 in a Solvothermal Process and Conversion to Nanocrystalline Cu2−xSe

HL Su,Y Xie,ZP Qiao,YT Qian

DOI: https://doi.org/10.1016/s0025-5408(00)00305-6

IF: 5.6

2000-01-01

Materials Research Bulletin

Abstract:A precursor to prepare nanocrystalline Cu2−xSe was obtained in the solvothermal reaction of CuCl2·2H2O with elemental selenium at 140°C for 10 h in ethylenediamine (en). Powder X-ray diffraction (XRD), infrared (IR) spectroscopy, thermal analyses (TGA-DTA), and inductively coupled plasma (ICP) analyses showed that the precursor could be a complex with the form Cu2−xSe(en)2, which released the ligand ethylenediamine to obtain Cu2−xSe crystals by pyrolysis or protonation. XRD, transition electron spectroscopy (TEM), and X-ray photoelectron spectroscopy (XPS) were used to investigate the phase, size, morphology, and composition, respectively, of the final product. The analyses indicated that it was a pure nanocrystalline Cu2−xSe with cubic structure.
Solvothermal Synthesis and Characterization of Carbon Nanotube–cuins2 Hybrids

Yan Yang,Haoqiang Zhang,Yiwen Zhao,Yinglin Song,Huixia Wu,Shiping Yang

DOI: https://doi.org/10.1016/j.diamond.2015.08.015

IF: 3.806

2015-01-01

Diamond and Related Materials

Abstract:CuInS2 nanoparticles (NPs) have been decorated on the sidewalls of multiwalled carbon nanotubes (MWCNTs) by a solvothermal approach using copper diethyldithiocarbamate and indium diethyldithiocarbamate as precursors. The resulting MWCNT–CuInS2 hybrid samples have been extensively characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform IR spectra, ultraviolet–visible–near infrared spectra and X-ray photoelectron spectroscopy. The precursor concentration, reaction temperature and reaction time have a great influence on the size and morphology of the formed CuInS2 NPs. The open-aperture z-scan technique has been used to study the nonlinear optical properties of two typical MWCNT–CuInS2 samples, which show better optical limiting performance than purified MWCNTs.
A Mild Solvothermal Route to Chalcopyrite Quaternary Semiconductor CuIn(SexS1 − X)2 Nanocrystallites

JP Xiao,Y Xie,YJ Xiong,R Tang,YT Qian

DOI: https://doi.org/10.1039/b100092f

2001-01-01

Journal of Materials Chemistry

Abstract:Chalcopyrite quaternary semiconductor CuIn(SexS1 - x)(2) nanocrystallites (0 less than or equal to x less than or equal to 1) were successfully prepared via a relatively simple and convenient solvothermal route. From X-ray data it is found that the cell constants a and c vary linearly with the composition x as: a(Angstrom) = 5.5299 + 0.2665x, c(Angstrom) = 11.1004 + 0.5139x. The sample CuInSeS was characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (IR). The optical property of CuIn(SexS1 - x)(2) nanocrystallites was also recorded by means of UV-Vis absorption spectroscopy. In addition, the effect of different solvents on the formation of the product was studied to indicate that ethylenediamine is the optimal solvent for this reaction. Finally, the reaction mechanism in ethylenediamine was also investigated.
Synthesis and Characterization of Ternary CuInS2 Nanorods Via a Hydrothermal Route

JP Xiao,Y Xie,R Tang,YT Qian

DOI: https://doi.org/10.1006/jssc.2001.9247

IF: 3.3

2001-01-01

Journal of Solid State Chemistry

Abstract:Well-defined ternary CuInS2 nanorods 20–25 nm in diameter and 400–450 nm in length were synthesized by the reaction of CuCl2, In, CS2, and NaOH at temperature as low as 180°C for 15 h when water was used as the solvent. The products were characterized by X-ray diffraction, transmission electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy, and UV–vis absorption spectroscopy techniques. Experimental results indicate that reaction temperature is an important factor in this approach and liquid indium plays an important role in the formation of CuInS2 nanorods. Finally, a solution–liquid–solid mechanism was proposed for the nanorod growth.
Reseach on Synthesis of Semiconductor Nanocrystaline CuInS_2

Weiling Luan

IF: 17.694

2010-01-01

NanoScience and Technology

Abstract:Nanocrystaline CuInS2 were synthesized via heating method mixtures using CuI,indium acetate,and dodecanethiol as precursors and liquid paraffin as solvent. The influence of the reaction temperature and addition of dodecanethiol on absorption and fluorescence spectroscopy of nanocrystaline CuInS2 were investigated. Nanocrystal CuInS2 were packaged with ZnS by Capillary micro-reactor.After that,the fluorescence intensity of CuInS2 was enhanced.

Synthesis of Nanocrystalline CuMS2 (M = in or Ga) Through a Solvothermal Process

ChemInform Abstract: Synthesis of Nanocrystalline CuMS2 (M: in or Ga) Through a Solvothermal Process.

Solvothermal Reaction Route to Nanocrystalline Semiconductors AgMS2 (m=ga, In)

ChemInform Abstract: Solvothermal Reaction Route to Nanocrystalline Semiconductors AgMS2 (M: Ga, In).

Polyol Mediated Solvothermal Synthesis and Characterization of CuIn(1−x)GaxS2 Nanocrystals

Synthesis, Characterization, and Properties of Nanocrystalline Cu2sns3

A general synthesis of Cu-In-S based multicomponent solid-solution nanocrystals with tunable band gap, size, and structure

Colloidal synthesis of monodisperse quaternary CuInSSe nanocrystals

Synthesis and Morphological Evolution of CuGaS2 Nanostructures Via a Polyol Method

Hydrothermal synthesis and characterization of CuIn2.0Se3.5 nanocrystallites

Solvothermal Synthesis of Copper Indium Gallium Selenide Powder

Facile synthesis and characterization of CuInS2 nanocrystals with different structures and shapes

Selected Synthesis of CuS Nanotubes and Hollow Nanospheres at Room Temperature.

A Novel One-Step Solvothermal Route to Nanocrystalline CuSbS2 and Ag3SbS3

Solvothermal Synthesis of Cu2ZnSnS4 Nanocrystals by Using Metal Oxides

A Solvothermal Route to Nanocrystalline Cu7Te4 at Low Temperature

Formation of Cu2−xSe(en)2 in a Solvothermal Process and Conversion to Nanocrystalline Cu2−xSe

Solvothermal Synthesis and Characterization of Carbon Nanotube–cuins2 Hybrids

A Mild Solvothermal Route to Chalcopyrite Quaternary Semiconductor CuIn(SexS1 − X)2 Nanocrystallites

Synthesis and Characterization of Ternary CuInS2 Nanorods Via a Hydrothermal Route

Reseach on Synthesis of Semiconductor Nanocrystaline CuInS_2