Abstract:A numerical simulation-based probabilistic analysis methodology, substructure-based distributed collaborative probabilistic analysis method (SDCPAM), is proposed for accurate and efficient fatigue prognosis based on distributed collaborative response surface method (DCRSM) and substructure analysis method. This paper focuses on the low-cycle fatigue (LCF) damage assessment for turbine blade–disk system. Based on the established probabilistic strain–life models and fatigue reliability model for tandem system, the LCF damage principle of turbine blade–disk system is proposed and integrated with SDCPAM. Following that, the LCF life prediction of the turbine blade–disk is completed, and probabilistic sensitivity analyses of blade and disk to the LCF life of the turbine blade–disk system are achieved. According to the above efforts, the feasibility and effectiveness of SDCPAM is verified. Finally, the LCF damage assessment for the blade–disk system is accomplished, and the influences of applied cycle and reliability level on the LCF damage are investigated. Through the comparisons of the proposed with traditional fatigue reliability model, it is illustrated that the proposed fatigue reliability model is reasonable. The results show that blade and disk almost have the same great influence on the blade–disk LCF life. In addition, applied cycles under normal and lognormal distributions produce the same LCF damage reliability that decreases with increasing applied cycle and reliability level. The efforts of this study indicate the reasonability of the proposed method and models in describing the LCF damage reliability of the blade–disk system, and enrich the reliability theory and method for the complex structure with multi-component and multi-failure mode.

Power-exponent function model for low-cycle fatigue life prediction and its applications – Part II: Life prediction of turbine blades under creep–fatigue interaction

Power-exponent function model for low-cycle fatigue life prediction and its applications – Part I: Models and validations

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

A life prediction method and damage assessment for creep-fatigue combined with high-low cyclic loading

Numerical Simulation of Creep Damage and Life Prediction of Superalloy Turbine Blade

A modified nonlinear cumulative damage model for combined high and low cycle fatigue life prediction

A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades

Multiaxial creep–fatigue failure mechanism and life prediction of a turbine blade based on a unified numerical solution approach

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

A Generalized Energy-Based Fatigue–creep Damage Parameter for Life Prediction of Turbine Disk Alloys

A New Energy-Critical Plane Damage Parameter for Multiaxial Fatigue Life Prediction of Turbine Blades

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Bi-iterative Moving Enhanced Model for Probability-Based Transient LCF Life Prediction of Turbine Blisk

Multiaxial Fatigue Life Prediction For Turbine Blades Using Finite Element Analysis

Lifetime Prediction of Turbine Blade of Turbocharger for Diesel Engine Based on Fatigue and Creep Damage Model

A critical-plane-based thermomechanical fatigue lifetime prediction model and its application in nickel-based single-crystal turbine blades

Life prediction of wind turbine blades using multi-scale damage model

Life prediction of wind turbine blades

Study of Creep-Fatigue Behavior in A 1000 Mw Rotor Using A Phenomenological Lifetime Model

Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade-disk

A modified damage accumulation model for life prediction of aero‐engine materials under combined high and low cycle fatigue loading