Abstract:The interface heat transfer coefficient (IHTC) at the different casting/shell mold interfaces during the vacuum investment casting process was investigated by measuring the temperatures of K4169 superalloy melt and mold shell during the preheating, transferring, pouring, and solidification processes. The inverse model of ProCAST was used to calculate the interface heat transfer coefficient (IHTC) based on the temperature measurement results. The inverse calculation results show that the heat transfer between the shell mold and the outside air changes from natural convection to forced convection during the transfer process, but the heat transfer between the shell mold and the inside air is consistently natural convection heat transfer. Then, the convective heat transfer coefficient gradually decreases to 0.1 W/m 2 ·K with the vacuum increases and is finally converted to radiation heat transfer at a vacuum of 10 -3 Pa. In the early stages of solidification, the IHTC between the shell mold and the casting can reach 16,000 W/m 2 ·K due to the close contact and the large temperature difference between them, and with the thermal expansion of the shell mold and cooling contraction of the casting, the formation of the gap leads to the interfacial heat transfer coefficient gradually stabilizing at 100–200 W/m 2 ·K. The experimental validation results show that the IHTC has a great influence on the accuracy of the prediction of the location and shape of shrinkage porosities in the vacuum investment castings.

Application of an Optimization Method and Experiment in Inverse Determination of Interfacial Heat Transfer Coefficients in the Blade Casting Process

Determination Of The Interface Heat Transfer For The Investment Castings Of Aerofoil-Shaped Turbine Blades Using Optimization And Fe Method

Investigation and Application of Inverse Determination of Interfacial Heat Transfer Coefficient in Vacuum Investment Casting

Determination of Interfacial Heat Transfer Coefficient During Single Crystal Blade Casting Process

A New Method for Determining Transient Interfacial Heat Transfer Coefficients in Horizontal Continuous Casting

Determination of Interfacial Heat-Transfer Coefficient During Investment-Casting Process of Single-Crystal Blades

INVERSE CALCULATION OF INTERFACIAL HEAT TRANSFER COEFFICIENTDURING SOLIDIFICATION OF CIRCULAR CAST STEEL CASTINGS BY NO-BAKE FURANRESIN BONDED SAND CASTING

Numerical Simulation Analysis of Displacement Field for Investment Casting

Performance Analysis of Metaheuristic Optimizers on the Estimation of the Interfacial Heat Transfer Coefficient in Aluminum–Silicon Permanent Mold Casting

Regularized Determination of Interfacial Heat Transfer Coefficient During ZL102 Solidification Process

Determination of Interfacial Heat Transfer Coefficient at the Frozen Sand Mold Casting Process of ZL101 Alloy

Optimization of the Interface Heat Transfer Coefficient Model Based on the Dynamic Thermo-Physical Parameters in the Pressure-Temperature Coupled Field

An Inverse Estimation of Frozen Sand Mold-Melt Heat Transfer Coefficient in the Solidification of A356 Alloy

Optimization of V-Process for Cast-Iron Boiler Plate

Determination of Interfacial Heat Transfer Coefficient and Its Application in High Pressure Die Casting Process

Numerical simulation of displacement field of solidification process for investment casting

Core shifting prediction in filling process of hollow turbine blade investment casting

Aerodynamic and Heat Transfer Design Optimization of Internally Cooling Turbine Blade Based Different Surrogate Models

Determination of the Interfacial Heat Transfer Coefficient at the Metal-Sand Mold Interface in Low Pressure Sand Casting

Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy

A Study of the Interfacial Heat Transfer Between an Iron Casting and A Metallic Mould