Design and Implementation of Embedded Linux System

Xin Zhaohua,Tian Yumin

DOI: https://doi.org/10.3969/j.issn.1007-7820.2008.05.020

2008-01-01

Abstract:The basic conceptions of embedded Linux is introduced,and its code structure analyzed.The kernel tailoring on Intel processors is discussed in detail.The new kernel successfully implements six serial in- terfaces communication.

What problem does this paper attempt to address?

Research on Embedded Linux Operating System

刘文峰,李程远,李善平

DOI: https://doi.org/10.3785/j.issn.1008-973x.2004.04.013

2004-01-01

Abstract:Taking advantages of the modular nature of Linux, a set of Linux modules were improved to make Linux run on various SoC. The module improvement was including: developing a target-specific bootloader, designing a memory management module for the MMU-less processor, real-time improvement in scheduling module and organizing a small footprint file system for the flash memory. These modules can be reassembled on demands, catering for different boards and applications. Moreover, methods for developing embedded Linux are concluded, including tool chains and debug techniques. Case studies on two hardware platforms, based on ARM720T and M68K respectively, shown that the work satisfies application requirements.
Design of VxWorks-based High-performance Embedded Control Platform

Hui DONG,Ying-zi SHI,Jian-gang LU

DOI: https://doi.org/10.3969/j.issn.1671-7848.2004.z1.039

2004-01-01

Abstract:Based on advanced Microprocessors MPC8260 and real-time operating system VxWorks, a high-performance embedded computing control platfonn is proposed to meet the increased requirements of complexity and real time in intelligent control systems. DSP array and FPGA is also designed for high-speed parallel signal processing. This platfonn can be used in communication, intelligent robot, military aircrafts, radar and medical imaging instruments etc.
The Design of Embedded Socket Software

ZHANG Han,FENG Dong-qin

DOI: https://doi.org/10.3969/j.issn.1000-0682.2007.02.016

2007-01-01

Abstract:This paper makes a study of the principle of an embedded UDP stack socket,and presents the design conception of the socket tasks run in the kernel of an embedded operation system along with the real-time application run in the socket task to ensure its real-time demand.These applications perform in an interface mode,which is different from the kernel mode and the user's mode in the embedded operation system.
Design of an Embedded Real-Time Operating System

Jian-xin WANG,Xue-zeng PAN

DOI: https://doi.org/10.3969/j.issn.1671-7147.2005.04.011

2005-01-01

Abstract:To develop an embedded real-time operating system with own property rights, we combined memory management characteristic of uCLinux with real-time characteristic of RTAI. With elaborate design in main modules such as architecture, memory management, process management, exception and interrupt handling and timer, we eventually made a hard real-time embedded operating system——ZDRTOS.
Design and Create Saving Data Base on Embedded System

Ruiyang Wang

2006-01-01

Abstract:Iintroduced a method of saving data base on embedded Linux OS,and expatiated the design process of the device driver programming of IDE hard disk in embedded Linux OS,then discussed the subject about saving a great deal of data in embedded system.
DESIGN OF USER MODE FILE SYSTEM BASED ON LINUX

Zhou Qiang,Li Shanping

DOI: https://doi.org/10.3969/j.issn.1000-386X.2007.10.033

2007-01-01

Abstract:A design of user mode file system based on Linux is introduced.A kernel module and a user mode daemon are adopted.The user mode file system can improve the flexibility of file system,and it is easy for redevelopment.The detailed issues about the design are presented,and the practical example and application scope are proposed.
Comparison and analysis of major embedded real-time operating systems

phillip a laplante,seppo j ovaska

2006-01-01

Journal of Computer Applications

Abstract:With the foundation of real-time, fault tolerant, standard compatibility,a standard for embedded real-time OS was suggested, which included embedded OS architecture, supported hardware, schedule management, memory management, inter-process communication, timer performance, network support, file system, driver development and debug and so on. Also a detailed analysis and comparison for major embedded real-time operating systems was given,and it can be a good guide to select the best embedded real-time OS for the application situation.
Design & Implementation of an Embeded OS Based on Linux

邵海东,周鹏,胡南军,陈道蓄,谢立

DOI: https://doi.org/10.3969/j.issn.1000-3428.2002.06.099

2002-01-01

Abstract:This paper discusses some of the main differences in embedded OS and desktop OS and some techniques for lowering the system requirement of the Linux.We also use these techniques to implement an embedded OS and its high level UI.
A Novel Design and Implementation of Embedded High-Speed Communication System

DENG Yong,LING Xiao-feng,GONG Xin-bao

DOI: https://doi.org/10.3969/j.issn.1009-2552.2011.03.019

2011-01-01

Abstract:Towards the development of the high-speed communication system and deficiency of current embedded communication system in the high-speed property,a novel design of high-speed embedded communication system based on Linux is proposed in this paper.The proposed design is suited for the environment of high-speed data communication and signal processing.Through the system implementation and hardware verification,conclusion can be drawn that the proposed system can work stably in high-speed communication.
Design and Realization of Embedded Robotics Teaching System

ZHANG Yang,WANG Xuan-yin,LIU Song-guo

DOI: https://doi.org/10.3969/j.issn.1001-2265.2007.03.001

2007-01-01

Abstract:Teach programming system has been widely used in robot control system, and it is the mainstream that combines the embedded system and network with the teach programming system.A new kind of robot teach programming system based on the embedded system is introduced,and both hardware and software system of it has been described specifically.With the test of the whole robot system,it demonstrates that the designing of the embedded teach programming system has many excellencies and provides a new design theory of the robot teach programming system.
Design of Boot Loader with Multiple Communication Port

Ke Pei,Gang Zhang,Fujiang Li

DOI: https://doi.org/10.1109/csse.2008.1285

2008-01-01

Abstract:An embedded system with complex embedded microprocessor inner resources and plentiful peripheral devices cannot work efficiently without the management of operating system. How to develop Boot Loader on the basis of the specific hardware platform is a key point and difficulty without question. The concept and function of embedded operating system booting program-Boot Loader which has multiple communication ports is introduced. In the ARM & DSP dual-core embedded microprocessor system development platform, by loading Linux operating system kernel, the authors expatiate on software designing methods of file downloading via three common communication interfaces (UART, Ethernet0, USB port).
Embedded SOC System Design

XU Tao,LIANG Li-ping,WANG Dong-sheng

DOI: https://doi.org/10.3969/j.issn.1000-7024.2006.11.030

2006-01-01

Abstract:As the mainstream design of IC at present,various SOC systems share much commonality,and there exist many commercialized IP cores.However,the customization needs of embedded systems call for a lot of time and efforts on system structure design and transplant of BIOS and OS.Through the research on the architectures of various SOC systems,an embedded SOC system is presented,which features have comprehensive functions,simple structure,and easy extension potential.Only slight modification and adjustment is needed for this SOC system to meet the needs of most embedding applications.And a series of hardware and software solutions are offered,too.
Design and Implementation of Embedded Controller Based on Rabbit2000

黄健,张宏建,胡赤鹰

DOI: https://doi.org/10.3969/j.issn.1002-1841.2004.02.020

2004-01-01

Abstract:In recent years,embedded devices are more widely used than before.Introduces the embedded controller system based on Rabbit2000 microprocessor.The industry meters and devices can be controlled remotely by the system.The architecture and functions of the system are discussed.The hardware and software implement of the embedded controller are also given in detail.The embedded controller posses many features,such as well anti-disturbance,high reliability and high performance-price ratio and its application in industry automation gets satisfied results.
Design of the Software System of Automatic Flat Knitting Machine Based on Linux Embedded Technology

Hongkai WANG,Senlin ZHANG

DOI: https://doi.org/10.3321/j.issn:0253-9721.2008.02.025

IF: 2.3

2008-01-01

Textile Research Journal

Abstract:In order to improve the software control method of fully automatic flat knitting machine inland,the structure and theory of flat knitting machine were analyzed,and a new-style doable software design based on the hardware(ARM FPGA) which was already chosen was proposed.This software design is based on embedded Linux,which includes the control algorithm of taker-in roller system,driver design,knit control program design and graphical user interfaces design.Compared with congener products,the machine based on this design is more advanced,easier to be transplanted,accessible in a network and low cost.It is proved to be a doable design in practice.
Embedded Linux Transplantation

CHEN Yong-qiang,TAO Pin,WANG Du-qiang

DOI: https://doi.org/10.3969/j.issn.1006-7167.2012.09.018

2012-01-01

Abstract:This paper introduced the embedded Linux experiment.By using the actual embedded industrial products,the students can experience the design ideas and methods in embedded system;can learn the generation of the embedded Linux operating system,the method of loading and the use of common Linux command;can experience crossover development environment and crossover development method;can familiarize with laboratory network development environment;can understand embedded startup procedure,serial ports,TFTP,and the use of embedded Linux documentation system development tool;and can understand the details of internal implementation of the embedded system,which will lay a firm foundation for the conduct of more important experiments in the future.
The Study And Design Of Embedded Real-Time Operating System Based On 80c196kc

Ja Lou,Dm Zhou,W Li,Jh Yu

2005-01-01

Abstract:The approach is presented, which is used to design embedded real-time operating system based on 80C196KC. Expatiated the implement of time slice, task attemper, signal variable and interrupt.
Design of New Modular Industrial Controller Based on Embedded Linux

CHEN Xi,LU Xiang-ye,LIU Yan-fang

DOI: https://doi.org/10.3969/j.issn.1002-1841.2010.11.010

2010-01-01

Abstract:Aimed at the increasing demands of variables in the industrial field.This paper proposed a modular design method of industrial controller.The main controller adopted ARM9 as the control core and embedded Linux operating system.Both the acquisition and control part were modular design of the conditioner,rectifier control circuit.Software designed HMI system with configuration control function.The controller is capable of processing and computing varieties of signals with high accuracy and speed.This paper focused on design of the main controller software and the development process by use Qt/E,a cross-platform development tools.
Embedded Linux Device Drivers Development

Joachim Schröder,Tilo Gockel,Rüdiger Dillmann

2006-01-01

Abstract:With Linux operating system being already more and more acceptable,many enterprises apply Linux as development platform.The concept of Linux device drivers program is mainly elaborated and the general module framework and particular development process of the device drivers under embedded Linux are dissected in the article.The relationship between Linux device driver and kernel is illustrated.Furthermore,how to design and program the modulesized device drivers under embedded Linux are expounded by examples.Moreover,the core code is explained.
Design and Implement of ETOP-A Embedded Windows System

陈文智

DOI: https://doi.org/10.3969/j.issn.1000-7024.2001.06.013

2001-01-01

Abstract:Along with the coming era of Post PC, embedded system has been becoming one focus research field of IT industrial. Based on the embedded Linux OS,one embedded window system──ETOP and one embedded web browser──ECAMATop have been developed.This paper introduces ETOP in detail including its structure, working theory, and implement.
DESIGN AND IMPLEMENTATION OF EMBEDDED INPUT METHOD BASED ON SCIM

Ye Zhihua,Zhou Yu,Du Sidan

DOI: https://doi.org/10.3969/j.issn.1000-386X.2010.06.082

2010-01-01

Abstract:This article introduces the design and implementation of embedded input system based on SCIM.The experiment environment is the development board based on the microprocessor S3C2440A and the LCD with touchscreen.The latest Linux 2.6 kernel is ported and the Matchbox desktop system is used.As the experiment indicates,ported and optimized SCIM input method uses less resource,it is stable and of great value in popularisation.

Design and Implementation of Embedded Linux System

Research on Embedded Linux Operating System

Design of VxWorks-based High-performance Embedded Control Platform

The Design of Embedded Socket Software

Design of an Embedded Real-Time Operating System

Design and Create Saving Data Base on Embedded System

DESIGN OF USER MODE FILE SYSTEM BASED ON LINUX

Comparison and analysis of major embedded real-time operating systems

Design & Implementation of an Embeded OS Based on Linux

A Novel Design and Implementation of Embedded High-Speed Communication System

Design and Realization of Embedded Robotics Teaching System

Design of Boot Loader with Multiple Communication Port

Embedded SOC System Design

Design and Implementation of Embedded Controller Based on Rabbit2000

Design of the Software System of Automatic Flat Knitting Machine Based on Linux Embedded Technology

Embedded Linux Transplantation

The Study And Design Of Embedded Real-Time Operating System Based On 80c196kc

Design of New Modular Industrial Controller Based on Embedded Linux

Embedded Linux Device Drivers Development

Design and Implement of ETOP-A Embedded Windows System

DESIGN AND IMPLEMENTATION OF EMBEDDED INPUT METHOD BASED ON SCIM