Abstract:Examining various properties of PP/EPDM TPV enhanced with interfacial compatibilizers and cellulose nanocrystals, while establishing correlations between morphology and these properties. In this study, dynamically vulcanized thermoplastic elastomer nanocomposites consisting of polypropylene (PP) as the thermoplastic matrix, ethylene propylene diene monomer (EPDM) rubber as the dispersed phase, and needle‐like cellulose nanocrystals (CNC) were investigated. The two polymers were melt blended in a ratio of 70/30 (PP/EPDM) and 60/40% w/w (PP/EPDM) together with CNC (2, 3, and 5 phr) and sulfur‐curing system. The potential of EPDM‐g‐MA and PP‐g‐MA's as interfacial compatibilizers for enhancing interfacial interactions between components and partitioning of CNC between the two polymer phases was examined by measuring the decrease in the size of EPDM particles. The resulting thermoplastic vulcanizates (TPV) were characterized using a melt rheometric mechanical spectrometer (RMS), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and tensile tests. The inclusion of any type of interfacial compatibilizers led to enhanced tensile properties when compared to the samples lacking compatibilizers in both TPVs and TPEs in different ratios. EPDM‐g‐MA was found to be more effective for 60/40% w/w (PP/EPDM) TPVs, while PP‐g‐MA showed higher potential for 70/30% w/w TPVs. The CNC‐reinforced TPVs displayed higher melt elasticity than their unloaded counterparts. These nanocomposites also showed reduced EPDM particle size, enhanced Young modulus, and a higher degree of crystallinity. Highlights Nanocomposite thermoplastic vulcanizates (TPVs): polypropylene (PP)/ethylene propylene diene monomer (EPDM)/cellulose nanocrystals (CNC) with matrix‐dispersed morphology. Interfacial enhancement: Compared EPDM grafted maleic anhydride (EPDM‐g‐MA) and PP‐g‐MA potentials. Tensile properties: EPDM‐g‐MA is more effective in higher rubber content TPVs. Mechanical enhancements: Improved properties and Young's modulus in CNC‐filled TPVs. Diverse applications: PP/EPDM/CNC nanocomposites in auto, electrical, electronic, and packaging industries.

Foamed ethylene-propylene-diene rubber/polypropylene thermoplastic vulcanizate prepared by chemical foaming Ⅰ. Extrusion processing parameters

Study on the Preparation and Properties of POE/PP Dynamic Vulcanized Thermoplastic Elastomers with Low Degree of Hardness

Study on the fusion properties of extruded foaming rigid PVC

Unexpected Improvement of Both Mechanical Strength and Elasticity of EPDM/PP Thermoplastic Vulcanizates by Introducing β-Nucleating Agents

The effect of rubber and plastic mass ratio on the compatibilized ethylene propylene diene monomer/polypropylene TPV with shape memory behavior

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Effect of crosslinking agent dosage on the morphology and properties of thermoplastic vulcanizates based on hydrogenated acrylonitrile butadiene rubber and thermoplastic polyester elastomer

Dynamically vulcanized CNC‐reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization

Thermoplastic vulcanizates with an integration of good mechanical performance and excellent resistance to high temperature and oil based on HNBR/TPEE

Dependence of microstructure and properties of polypropylene/bromo‐isobutylene‐isoprene rubber thermoplastic vulcanizates on the molding process

Effects of shear during injection molding on the anisotropic microstructure and properties of EPDM/PP TPV containing rubber nanoparticle agglomerates

The study of the chemical crosslinked and foamed PP/LDPE

Influence of TPU/EVA Phase Morphology Evolution on Supercritical Carbon Dioxide Extrusion Foaming

Optimizing Processing Parameters for NR/EBC Thermoplastic Vulcanizates: A Comprehensive Full Factorial Design of Experiments (DOE) Strategy

Chain extension of thermoplastic polyamide elastomer and its foaming performance

Preparation and Flammability of Epdm/Pp/Mg(Oh)(2) Dynamic Vulcanizates

Preparation of FKM/EFEP thermoplastic vulcanizate with excellent heat and oil resistance, gas barrier property and recyclability

A method to essentially increase the compatibility of thermoplastic polyurethane/methyl vinyl silicone rubber based thermoplastic vulcanizate

Morphological, thermal and mechanical properties of polypropylene foams via rotational molding

Effect of extrusion on the foaming behavior of thermoplastic polyurethane with different hard segments

Mechanical Properties and Thermal Behaviors of Dynamically Photocrosslinked PP/EPDM Blends