Abstract:The blast furnace is a highly efficient but energy-intensive chemical reactor for iron production. Two types of solid fuels, viz. coarse coke particles and fine pulverized coal powders, are combusted simultaneously, forming the dynamic cavities (termed raceway) at the lower part of the blast furnace, and their behaviour affects each other considerably, although this has not been clearly established in the past. In this study, a three-dimensional transient model is developed for describing the complex co-combustion of pulverized coal and coke coupled with the dynamic raceway evolution under industrial-scale blast furnace conditions. The model couples a gas-coke combustion model with a gas-coal combustion model in a transient state by means of two-way coupling scheme. The model is then validated against experimental measurements. The typical transient in-furnace phenomena are illustrated in terms of raceway shape and size, gas-solid-powder flow, temperature fields, gas composition and coal and coke combustion. As time progresses from 0 s to 7.0 s, the raceway size increases in depth, width and height; and the coal burnout slightly increases. At around 7.0 s, the raceway profile and coal and coke combustion approach a relatively stable state. Additionally, the effects of blast rate on the in-furnace phenomena are studied. Under the simulated conditions, when the blast rate is increased from 140 m/s to 180 m/s, a larger raceway is formed and the depth is increased by 22.2%. Subsequently, the average burnout of pulverized coal is improved by 3.6% and the reducing gas, i.e., CO, is increased by 1%. This model offers a cost-effective tool to optimize coke/coal co-combustion in blast furnaces for energy saving and operation stability.

Cold Model of Coal Gas Component Concentration Distribution in Blast Furnace Raceway

CFD-DEM Study on the Synergistic Effect of Coke Consumption and Particle Dynamics in the Blast Furnace Raceway

Research on the impact of tuyere parameters on the states of hydrogen-rich blast furnace

Particle-scale study of coke combustion in the raceway of an ironmaking blast furnace

Numerical investigation of hydrogen-rich gas and pulverized coal injection in the raceway of a blast furnace with lower carbon emissions

Three-dimensional Modelling of Coal Combustion in Blast Furnace

Transient 3D CFD study of pulverised coal combustion and coke combustion in a blast furnace: Effect of blast conditions

Three-dimensional transient modelling of coal and coke co-combustion in the dynamic raceway of ironmaking blast furnaces

Numerical Analysis of Pulverized Coal Combustion Inside Tuyere and Raceway

Comprehensive Numerical Modeling of Raceways in Blast Furnaces

Cold Model Test on Gas-Solid Two Phase Flow in Double Charge-Discharge Coal Ball Mill

Modeling on the Blast Furnace with CO2-enriched Hot Blast

Influences of Scaffold and Coal Injection on Gas and Liquid Flow Distributions in Blast Furnace: Mathematical Model

DEM-CFD investigation on the blast furnace raceway characteristics: Heat/mass transfer, dynamics and mechanisms

CFD-DEM simulation of raceway size and mechanical characteristics of industrial scale blast furnace

Numerical Simulation Study of Co-injection of Pulverized Coal and Hydrogen in the Tuyere-Raceway

Numerical Investigation of the Limit of Coke Rate Reduction in an Ironmaking Blast Furnace (BF)

Three-Dimensional Simulation of the Pulverized Coal Combustion Inside Blast Furnace Tuyere

Heat distribution model under hydrogen-rich low-carbon conditions in blast furnace

Simulation of Pulverized Coal Combustion in Blast Furnace Tuyere

Three-dimensional Numerical Simulation of Entrained-Flow Gasifier and Influence of Coal Distribution at the Inlet