C60 Modified Single-Walled Carbon Nanotubes

XL Li,LQ Liu,YJ Qin,W Wu,ZX Guo,LM Dai,DB Zhu

DOI: https://doi.org/10.1016/s0009-2614(03)01088-1

IF: 2.719

2003-01-01

Chemical Physics Letters

Abstract:Single-walled carbon nanotubes (SWNTs) can react with C60 through simple solid-phase mechanochemical reaction at room temperature under nitrogen atmosphere to produce C60 modified SWNTs.

What problem does this paper attempt to address?

Carbon Nanotubols from Mechanochemical Reaction

HL Pan,LQ Liu,ZX Guo,LM Dai,FS Zhang,DB Zhu,R Czerw,DL Carroll

DOI: https://doi.org/10.1021/nl025856b

IF: 10.8

2002-01-01

Nano Letters

Abstract:Single-walled carbon nanotubes (SWNTs) can react with potassium hydroxide through a simple solid-phase mechanochemical reaction at room temperature to produce single-walled carbon nanotubols (SWNTols) - multiple hydroxyl groups direct-modified SWNTs. The SWNTols are highly soluble in water and can be readily self-assembled into aligned arrays through strong surface hydrogen bond interactions.
Electrochemistry of double-wall carbon nanotubes encapsulating C 60 and their spectral characterization

kaiye wu,hanxun qiu,jingbo hu,nijuan sun,zhiwei zhu,meixian li,zujin shi

DOI: https://doi.org/10.1016/j.carbon.2012.05.016

IF: 10.9

2012-01-01

Carbon

Abstract:Electrochemistry of double-wall carbon nanotubes (DWCNTs) encapsulating C60 (C60@DWCNT) have been studied by preparing a C60@DWCNT modified electrode, and three pairs of reversible electro-reduction waves corresponding to electron transfer reactions of C60 inside DWCNTs have been obtained in a mixed solvent of toluene and acetonitrile (4:1, v:v) containing tetrabutylammonium cation as supporting electrolyte, which indicates that DWCNTs act as molecular wires to allow electrical communication between the underlying electrode and the redox-active guest C60. The influencing factors on the electrochemistry of C60@DWCNT modified electrodes have been investigated. The results suggest that the voltammetric behavior of C60@DWCNT is dependent on the nature of the supporting electrolyte and the solvent system. In addition, spectral characterization of the C60@DWCNT modified electrodes before and after electrochemical scanning reveals interaction between C60 and DWCNT and verifies the reduction of C60 encapsulated in DWCNTs. C60 molecules inside DWCNTs retains their redox activity, and can also act as an electron-transfer mediator to electrocatalyze the reduction of halohydrocarbon.
Metal catalyst-free mist flow chemical vapor deposition growth of single-wall carbon nanotubes using C 60 colloidal solutions

yun sun,ryo kitaura,jinying zhang,yasumitsu miyata,hisanori shinohara

DOI: https://doi.org/10.1016/j.carbon.2013.10.038

IF: 10.9

2014-01-01

Carbon

Abstract:Metal catalyst-free mist flow chemical vapor deposition (CVD) growth of single-walled carbon nanotubes (SWCNTs) with C60 fullerenes has been investigated by using an aqueous colloidal C60 solution. Under the optimum reaction condition, relatively uniform SWCNTs with a mean diameter of 1.28nm can be synthesized without any treatments of C60 prior to CVD. Cap opening, nucleation and the growth of SWCNTs have been occurring almost simultaneously during the present CVD. C60 can be used as the seeds (i.e., end-caps) of SWCNTs, in which oxygen atoms from water molecules provide etching of C60 into caps. Furthermore, the coalescence of C60 caps into a larger one leads to the growth of SWCNTs with larger diameters.
Chemical modification of single-walled carbon nanotubes with silane coupling agent

Su Xiaohong,Xiong Chuanxi,Guo Hong,Lei Youan

DOI: https://doi.org/10.3969/j.issn.1006-3536.2007.03.015

2007-01-01

Abstract:Single-walled carbon nanotubes(SWNTs) were opened and oxidized in the concentrated H2SO4/HNO3 mixture(volume ratio:3:1),hydroxyl groups could be brought into the SWNTs after oxidation modification treatment,and the long-chain silane coupling agent was grafted onto SWNTs via hydroxyl-silanol route.Solubility in trichloromethane、tetrachloromethane and carbon sulfide of the chemically modified SWNTs enhanced in comparison with the control(without modification).The characterization of SWNTs was carried out by FT-IR spectra,Thermogravimetic analysis(TGA) and transmission electron microscope(TEM).
Controlled modification of multiwalled carbon nanotubes with Zno nanostructures

Xiuying Wang,Baiying Xia,Xingfu Zhu,Jiesheng Chen,Shilun Qiu,Jixue Li

DOI: https://doi.org/10.1016/j.jssc.2008.01.005

IF: 3.3

2008-01-01

Journal of Solid State Chemistry

Abstract:Multiwalled carbon nanotubes (MWNTs) have been successfully modified with ZnO nanostructures by zinc–ammonitum complex ion covalently attached to the MWNTs through the C–N bonds. Flower-like ZnO on the tips of MWNTs and ZnO nanoparticles on the surface of MWNTs have been obtained, respectively, via adjusting the reaction time. The modified MWNTs have been characterized with X-ray diffraction, scanning electron and transmission electron microscopy. A growth mechanism has been proposed in which the soaking time plays a key role in controlling the size, morphology, and site of ZnO nanostructures. Photoluminescence properties of the as-synthesized products have also been investigated.
Controlled Modification of Multi-Walled Carbon Nanotubes with Cuo, Cu2o and Cu Nanoparticles

Xiuying Wang,Feng Zhang,Baiying Xia,Xingfu Zhu,Jiesheng Chen,Shilun Qiu,Ping Zhang,Jixue Li

DOI: https://doi.org/10.1016/j.solidstatesciences.2008.10.009

IF: 3.752

2009-01-01

Solid State Sciences

Abstract:Multi-walled carbon nanotubes (MWNTs) have been successfully modified with CuO, Cu2O and Cu nanoparticles via a simple method, and the calcination temperature, the amount of NH3·H2O and soaking time play critical roles in controlling the final products. The modified MWNTs have been characterized by X-ray diffraction, infrared spectrum, scanning electron and transmission electron microscopies. Optical absorption of the obtained products has also been investigated, and the quantum confinement effect was illustrated in the absorption spectra.
C-60(Oh)(N)-Assisted Dispersion of Single-Walled Carbon Nanotubes

Yutaka Maeda,Takaaki Kato,Junki Higo,Tadashi Hasegawa,Takahiro Kitano,Takahiro Tsuchiya,Takeshi Akasaka,Toshiya Okazaki,Jing Lu,Shigeru Nagase

DOI: https://doi.org/10.1142/s179329200800143x

2008-01-01

NANO

Abstract:We demonstrate that C-60(OH)(n)-assists the dispersion of SWNTs in aqueous and nonaqueous solutions, which effectively exfoliates large-diameter SWNTs. The SWNT dispersions are characterized by absorption and photoluminescence spectra.
A New Approach to the Functionalization of Single-Walled Carbon Nanotubes with Both Alkyl and Carboxyl Groups

SM Chen,WM Shen,GZ Wu,DY Chen,M Jiang

DOI: https://doi.org/10.1016/j.cplett.2004.12.035

IF: 2.719

2005-01-01

Chemical Physics Letters

Abstract:Treating single-walled carbon nanotubes (SWNTs) with sec-butyllithium and subsequently with carbon dioxide leads to the SWNTs functionalized with both alkyl and carboxyl groups (named as c-a-SWNTs for simplicity). The resultant c-a-SWNTs are largely with lengths between 100 and 200 nm, which can be individually dispersed in water at the concentration of 0.5 mg/mL and the solution is nearly transparent. Zeta potentiometric titration indicates that c-a-SWNTs have a feature similar to a zwitterionic polyelectrolyte.
Effects of nanobuds and heat welded nanobuds chains on mechanical behavior of carbon nanotubes

Xueming Yang,Longjie Wang,Yanhui Huang,Albert C. To,Bingyang Cao

DOI: https://doi.org/10.1016/j.commatsci.2015.07.005

IF: 3.572

2015-01-01

Computational Materials Science

Abstract:•The mechanism for the effect of attached C60s on mechanical behavior of SWCNTs is studied.•Reasons of tensile strength reduction in the presence of C60 molecules in SWCNT are discussed.•Attached nanobuds chains can enhance the tensile strength of the SWCNTs bundles with defects.
Advances In Structure Modification Of Single Wall Carbon Nanotubes

Weihong Zhu,Shiqin Zhu,He Tian

DOI: https://doi.org/10.3321/j.issn:0253-2786.2002.12.005

2002-01-01

Chinese Journal of Organic Chemistry

Abstract:Single wall carbon nanotubes (SWNTs) have attracted considerable interest because of their unique electronic, mechanical and structural characteristics, which provide strong applicability to new functional devices. However, SWNTs are insoluble in water and common organic solvents, thus making them difficult to explore and understand the properties. With the great development of the preparation of SWNTs, it is necessary to bring about the structure functionalization of the basic structure. This paper is mostly concerned on the advances in recent studies on the structure modification of SWNTs, especially highlighting the chemical functionalization and physical adsorption.
Coordination chemistry on the surface of single-walled carbon nanotubes

Lingjie Meng,Chuanlong Fu,Zhaofu Fei,Qinghua Lu,Paul J. Dyson

DOI: https://doi.org/10.1016/j.ica.2010.07.049

IF: 3.118

2010-01-01

Inorganica Chimica Acta

Abstract:Transition metal–organic complexes based on the coordination chemistry of zinc, combined with single-walled carbon nanotubes which provide an alternative type of template, were successfully prepared. By using different linkers (additional ligands), the properties of the SWNT-TMCs may be easily tuned.
High-purity single-molecule modification of carbon nanotubes by stochastic distribution of DNA

Shoichi Nishitani,Zirun Liang,Deverin Smith,Markita P. Landry

DOI: https://doi.org/10.26434/chemrxiv-2024-qn66k

2024-10-17

Abstract:Single-walled carbon nanotubes (SWCNTs) show promise for probing molecular interactions at single-molecule resolution, but precise and uniform surface modifications needed for single-molecule SWCNT applications remain challenging due to the stochastic nature of chemical reactions. This study presents a batch-scale synthesis and separation of single-molecule modified SWCNTs, leveraging the stochastic distribution of single-stranded DNA (ssDNA) on SWCNTs and biology-inspired separation strategies. Specifically, SWCNTs were dispersed with ssDNA mixed with a small fraction of decorated ssDNA (m-ssDNA). We developed a stochastic ssDNA-SWCNT binding model to predict the distribution of ssDNA and m-ssDNA on SWCNT at distinct mixing ratios and successfully implemented our model to produce SWCNT nanoparticles predominately containing only one m-ssDNA tag. These singly modified SWCNTs were isolated from unmodified SWCNTs using magnetic bead exploiting biotin-streptavidin interactions, achieving 0.05 μg yield at 0.25% m-ssDNA ratio, corresponding to 97.6% purity of singly modified populations. Finally, the single-molecule modification at the predicted m-ssDNA ratios was confirmed using a fluorophore as a model, enabling precise determination of SWCNT molar concentration. Ultimately, our approach provides a batch-scale method for incorporating a single molecular tag per SWCNT, supporting diverse future applications in SWCNT-based nanotechnologies.

Chemistry
Coalescence of C60 Molecules Assisted by Doped Iodine Inside Carbon Nanotubes

Lunhui Guan,Kazu Suenaga,Toshiya Okazaki,Zujin Shi,Zhennan Gu,Sumio Iijima

DOI: https://doi.org/10.1021/ja073033o

IF: 15

2007-01-01

Journal of the American Chemical Society

Abstract:C-60-filled single-walled carbon nanotubes (SWNTs), so-called fullerene peapods, have been successfully doped with iodine. High-resolution transmission electron microscope observation revealed that the iodine atoms could be doped in the intratubular position. The doped intratubular iodine atom(s) can assist the coalescence of the C-60 molecules inside SWNTs. Heating the iodine-doped peapod at 550 degrees C induces the transformation of C-60 molecules into a tubular structure. The doped iodine atoms can be intercalated between the outer host SWNT and the newly formed inner SWNT.
C60‐Based Materials

J. G. Hou,A. D. Zhao,Tian Huang,Shan Lu

DOI: https://doi.org/10.1002/chin.200517244

2005-01-01

ChemInform

Abstract:AbstractFor Abstract see ChemInform Abstract in Full Text.
Fabrication Of Fullerene-Decorated Carbon Nanotubes And Their Application In Flame-Retarding Polypropylene

Pingan Song,Yu Shen,Baoxian Du,Zhenghong Guo,Zhengping Fang

DOI: https://doi.org/10.1039/b9nr00026g

IF: 6.7

2009-01-01

Nanoscale

Abstract:Multi-walled carbon nanotubes were decorated with fullerene (C-60) via a three-step chemical functionalization, with the goal of combining their unique physical and chemical characteristics and simultaneously improving the solubility of CNTs in organic solvents. C60 molecules, about 0.67% by molecule, were homogeneously bonded onto the surface of the CNTs. Electron microscopy clearly shows that C60 molecules are introduced onto the surface of the CNTs, and this is also evidenced by their UV-VIS absorption spectra. Cone calorimetry measurements showed that compared with pristine CNTs, fullerene-decorated CNTs further reduced the flammability of polypropylene, which may be due to the free-radical-trapping effect of C-60 and the barrier effect of the CNT network.
Theoretical Investigation of Encapsulation Processes of C-60 into Single-Wall Carbon Nanotubes

Haiming Duan,Xiang Gao,Guanjian Fu,Jiaming Li

DOI: https://doi.org/10.1016/j.physleta.2011.02.011

IF: 2.707

2011-01-01

Physics Letters A

Abstract:The encapsulation of C60 into single-wall carbon nanotubes is systematically studied by tight-binding molecular dynamics method with an appropriate long-range Lennard-Jones potentials. For a (16,0) nanotube, it is impossible to encapsulate C60 into the tube because of a much larger energy barrier with the relaxation of the open end.
Preferential Synthesis and Isolation of (6,5) Single-Wall Nanotubes from One-Dimensional C-60 Coalescence

Jinying Zhang,Yasumitsu Miyata,Ryo Kitaura,Hisanori Shinohara

DOI: https://doi.org/10.1039/c1nr10602c

IF: 6.7

2011-01-01

Nanoscale

Abstract:The (6,5) single-wall carbon nanotubes have been preferentially synthesized from a one-dimensional array of C(60) inside single-wall carbon nanotubes (d≅ 1.5 ± 0.1 nm). The as-produced inner tubes have been extracted via sonication and density gradient ultracentrifugation methods and demonstrated to be dominated by (6,5) tubes by optical absorption, Raman scattering, photoluminescence, high-resolution transmission electron microscope observation, and a semi-empirical simulation (PM3).
Synthesis, characterization and properties of C 60 nanocrystals, nanowires and hierarchical nanostructures

Jia Liu,Yunyi Fu,Ao Guo,Chuan Wang,Zujin Shi,Zhennan Gu,Ru Huang,Xing Zhang

DOI: https://doi.org/10.1166/jnn.2009.C201

2009-01-01

Journal of Nanoscience and Nanotechnology

Abstract:In this article, we propose a simple and reproductive approach to prepare low dimension C-60 nanostructures, which bases on the crystallization of C-60 from volatile solution on the surface of substrates of different materials. The C-60 nanowires that we obtained have a uniform shape with a length from 2 to 10 mu m and a diameter from about 100 to 250 rim. In some cases, we could prepare the Y- or T-shaped nanostructures of C-60, which may be due to the crystal growth simultaneous in different directions. Besides the nanowires, we have also obtained C-60 nanoparticles with a diameter about 100 nm to 200 nm. The formation mechanism and electronic properties of the low-dimension nanostructures have also been investigated.
Esterification of Chemical Functional Single-Wall Carbon Nanotubes

Xiaofeng Xie,Lian Gao,Jing Sun

DOI: https://doi.org/10.4028/www.scientific.net/msf.695.373

2011-01-01

Materials Science Forum

Abstract:Two kinds of chemical functional single-wall carbon nanotubes (SWNTs) are covalently coupled into special V-type superstructure by the esterification in pyridine medium. Both SWNTs bundles and individual SWNTs can be bound effectively through the deacidification path. The esterification between different kinds of modified SWNTs takes place on their ends and the crystallinity of SWNTs are well remained during the course. Interestingly, the inclinations between coupled SWNTs are very closely to the ester bond angle (109o18’). Furthermore, the formation mechanism about the peculiar structure has been proposed in the paper. The results suggest that selected connection bonds will determine the different angles of coupled SWNTs.
Multifunctional Catalysts for Singlewall Carbon Nanotube Synthesis

T Guo

DOI: https://doi.org/10.1002/chin.200431215

2004-01-01

Abstract:Single-wall carbon nanotubes (SWNTs) are usually produced with the help of metal catalysts that first break down various carbon species such as graphite, carbon clusters, amorphous carbon, or hydrocarbons and then release them in the form of SWNTs. These catalysts therefore must perform several functions in order to produce high quality, high yield, long SWNTs, and the finesse of these catalysts is controlled by the balance between those functions. Such a production is critical to future applications such as telecommunication, molecular electronics, sensing, and mechanical devices. In general, multicomponent materials such as bimetallic nanoparticles (bi-MNPs) are much better catalysts than those made of single component materials because the two metals in the biMNPs can enhance certain functions by playing complementary catalytic roles. Furthermore, some functions can only be offered by bi-MNPs because the two metals are structurally arranged in such specific manners that the combined properties would otherwise be impossible to access by monometallic nanoparticles (mono-MNPs). Bimetallic catalysts have been proven superior with improved activity, selectivity, stability, and resistance to poisoning than their monometallic counterparts.1,2 For example, bi-MNPs are preferred heterogeneous catalysts in petroleum reforming processes.3 Bi-MNPs of large diameters (>50 nm) have also been used to catalyze the growth of carbon filaments.4 Those catalysts have also been used in ammonia synthesis

C60 Modified Single-Walled Carbon Nanotubes

Carbon Nanotubols from Mechanochemical Reaction

Electrochemistry of double-wall carbon nanotubes encapsulating C 60 and their spectral characterization

Metal catalyst-free mist flow chemical vapor deposition growth of single-wall carbon nanotubes using C 60 colloidal solutions

Chemical modification of single-walled carbon nanotubes with silane coupling agent

Controlled modification of multiwalled carbon nanotubes with Zno nanostructures

Controlled Modification of Multi-Walled Carbon Nanotubes with Cuo, Cu2o and Cu Nanoparticles

C-60(Oh)(N)-Assisted Dispersion of Single-Walled Carbon Nanotubes

A New Approach to the Functionalization of Single-Walled Carbon Nanotubes with Both Alkyl and Carboxyl Groups

Effects of nanobuds and heat welded nanobuds chains on mechanical behavior of carbon nanotubes

Advances In Structure Modification Of Single Wall Carbon Nanotubes

Coordination chemistry on the surface of single-walled carbon nanotubes

High-purity single-molecule modification of carbon nanotubes by stochastic distribution of DNA

Coalescence of C60 Molecules Assisted by Doped Iodine Inside Carbon Nanotubes

C60‐Based Materials

Fabrication Of Fullerene-Decorated Carbon Nanotubes And Their Application In Flame-Retarding Polypropylene

Theoretical Investigation of Encapsulation Processes of C-60 into Single-Wall Carbon Nanotubes

Preferential Synthesis and Isolation of (6,5) Single-Wall Nanotubes from One-Dimensional C-60 Coalescence

Synthesis, characterization and properties of C 60 nanocrystals, nanowires and hierarchical nanostructures

Esterification of Chemical Functional Single-Wall Carbon Nanotubes

Multifunctional Catalysts for Singlewall Carbon Nanotube Synthesis