Abstract:Submerged floating tunnel (SFT) is a new type of cable-supported structure system for strait crossing. Once the local anchor-cable suddenly fails, it will inevitably cause evident vibration and internal force redistributions of the structure. In order to study the dynamic responses and mechanical behaviors of the SFT subjected to abrupt anchor-cable breakage, a model test is conducted by a set of sensors installed on SFT for cable force, tube displacement and strain measurements. The transient dynamic signals following cable failure are tested and analyzed. Dynamic amplification factor (DAF) and dynamic coefficient (DC) are respectively used to evaluate the impact effect from the cable failure. Meanwhile, finite element simulations are also performed within ABAQUS. The establishments of the finished state of SFT before cable breakage and the dynamic cable failure process are presented both in the model test and FE model. Comparisons between the FE predicted values and the experimental results show a good agreement. On this basis, some influence factors are discussed in different cases of the cable-loss positions and the cable forces of ruptured cable, etc. The results show that the finished state of SFT under dead load (tube redundant buoyancy) after cable-force optimizations is more reasonable than that directly applying dead load without any cable-force adjustments, with more uniform cable force distribution and smaller tube deformation. Although the SFT suffers strong oscillations after sudden cable-breakage incident, no progressive collapse occurs when the safety margin of the rest structure is sufficient. The dynamic effect on remaining cable members due to sudden cable failure can be evaluated by DC method. A DC value of 1.5 is recommended to ensure the safety of SFT anchor-cables. When cable failure happens at the mid span of the tunnel, the deformation of SFT tube is most critical.

On the Cable Car Feed Support Configuration for FAST

EXPERIMENTAL RESEARCH OF FIRST FEED-SUPPORT SYSTEM OF FAST

Experimental Study and Theoretic Analysis of the Structure for Supporting the Feed Cabin of the FAST

Dynamic modeling and wind vibration control of the feed support system in FAST

Terminal Accuracy of the Feed Support System in FAST

Self-Excited Vibration Analysis For The Feed Support System In Fast

Trajectory Generation and Tracking Control of A Multi-Level Hybrid Support Manipulator in Fast

Modeling of A Feed Support System for Fast

A Modeling Method of the Cable Driven Parallel Manipulator for FAST

Modeling and Control Study of Cable-Driven Parallel Manipulator for FAST

Dimensional Optimization Design of the Four-Cable-Driven Parallel Manipulator in FAST

Anti-disturbance Performance Analysis and the Innovative Design of the FAST Fine-Tuning Platform

Similarity model of feed support system for FAST

Dimensional Design on the Six-Cable Driven Parallel Manipulator of FAST

Research on longitudinal vibration characteristic of the six-cable-driven parallel manipulator in FAST

Structure Design of Support Frame of Cableway on Car for Emergency Repair

Design of the Servo System of the Fine Turning Platform of FAST

Mechanical Behaviors and Experimental Study of Submerged Floating Tunnel Subjected to Local Anchor-Cable Failure

Test Study of the Feed-Support System for a Large Radio Telescope

Configuration Parameter Compositive Design for the Feed Fine-tuning Platform in FAST

Driving Force Analysis for the Secondary Adjustable System in FAST